Raptor:Serial Definition: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
[[ | [[Raptor-Platform|Return to the main Raptor page]] | ||
[[Raptor:Serial|Return to Serial page]] | [[Raptor:Serial|Return to Serial page]] | ||
Revision as of 17:29, 16 December 2016
Return to the main Raptor page
Description
This block is used to create a serial bus resource and map it to a particular hardware I/O point. This block will generate all the code necessary to connect and coordinate all the Raptor serial blocks with the hardware interface. Each serial bus that will be used in the model must include a serial definition block. Only one serial definition block can exist for any particular hardware resource.
Inputs
| Input | Type | Description |
|---|
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Serial Bus Name | String | The name of the serial bus resource. |
| Hardware Resource | The hardware interface to use for the serial bus. | |
| Baud Rate | Specifies the baud rate for the serial bus. | |
| Data Bits | Specifies the number of data bits per symbol. | |
| Parity | Specifies the type of parity used. | |
| Stop Bits | Specifies the number of stop bits used. | |
| Rx Queue Size | Specifies the size of the receive queue. This option is not available on all targets. | |
| Tx Queue Size | Specifies the size of the transmit queue. This option is not available on all targets. |