RCM-58NN-112: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
No edit summary
Line 18: Line 18:
=== Compilers ===
=== Compilers ===


Three options will be available for the RCM112.  For ASIL-C or D, use the Hitec PowerPC 4.9.  For non-ASIL, use either the GCC ST58 or NXP S32 Free compilers.  Contact Sales around compiler use and compatibility
<!--Three options will be available for the RCM112.  For ASIL-C or D, use the Hitec PowerPC 4.9.  For non-ASIL, use either the GCC ST58 or NXP S32 Free compilers.  Contact Sales around compiler use and compatibility


====Hitec for Power Architecture====
====Hitec for Power Architecture====
Line 28: Line 28:
Please reference the following Document to download and install the compiler from NXP's website.  Note - this compiler has not been validated with the RCM112 builds
Please reference the following Document to download and install the compiler from NXP's website.  Note - this compiler has not been validated with the RCM112 builds


:'''[https://wiki.neweagle.net/ProductDocumentation/Raptor/Controllers/S32%20Design%20Studio%20for%20Power%20Architecture%20v2.1%20Compiler%20Install%20Guide.pdf GCC For RCM112 Compiler Installation Guide]'''
:'''[https://wiki.neweagle.net/ProductDocumentation/Raptor/Controllers/S32%20Design%20Studio%20for%20Power%20Architecture%20v2.1%20Compiler%20Install%20Guide.pdf GCC For RCM112 Compiler Installation Guide]''' -->


Currently, only the ST58 SPC5-Studio Compiler is available for the RCM112. Additional compilers may be available in the future.
====ST58 SPC5-Studio====
====ST58 SPC5-Studio====
:'''[https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/spc5-software-development-tools/spc5-studio.html ST58 GCC]'''
:'''[https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/spc5-software-development-tools/spc5-studio.html ST58 GCC]'''

Revision as of 13:54, 21 September 2021

RCM-58NN-112-2007

The RCM112-2007 is a Raptor general-purpose control module with 4 CANFD buses, 1 LIN Master/Slave, 1 2-Wire Ethernet, 4 SENT channel, and configurable discrete inputs and outputs including analog inputs, frequency inputs, a wake input, high and low-side driver outputs, and 4 Half-Bridges.

The RCM112-2007 is one of the Raptor™ rugged production controllers that use a software development process based upon MATLAB/Simulink and Raptor-Dev which significantly speeds up algorithm development by using automatic integration and code generation. In addition, developers can quickly test application software using simulation and automated testing. See the next page for more details.

Version Comparison

A table is coming soon that compares the two current versions of the RCM112.


Data Sheets

  • RCM-58NN-112-2007
Datasheet
  • RCM-58NN-112-2103
Datasheet

Compilers

Currently, only the ST58 SPC5-Studio Compiler is available for the RCM112. Additional compilers may be available in the future.

ST58 SPC5-Studio

ST58 GCC

Webstore

Coming Soon. To Inquire Contact Sales

Other Modules

Back to: Controllers