GCM80: Difference between revisions
| Line 118: | Line 118: | ||
:'''[https://neweagle.net/support/wiki/ProductDocumentation/Controllers/GCM-5607B-080-1901/GCM80.zip GCM80 3D Model]''' | :'''[https://neweagle.net/support/wiki/ProductDocumentation/Controllers/GCM-5607B-080-1901/GCM80.zip GCM80 3D Model]''' | ||
== Compiler == | === Compiler === | ||
'''Code Warrior 2.10''' Available from [https://www.nxp.com/support/developer-resources/software-development-tools/codewarrior-development-tools/codewarrior-legacy/codewarrior-development-studios/codewarrior-for-microcontrollers/codewarrior-development-studio-for-mpc55xx-mpc56xx-classic-ide-v2.10:CW-MPC55XX_56XX NXP] | '''Code Warrior 2.10''' Available from [https://www.nxp.com/support/developer-resources/software-development-tools/codewarrior-development-tools/codewarrior-legacy/codewarrior-development-studios/codewarrior-for-microcontrollers/codewarrior-development-studio-for-mpc55xx-mpc56xx-classic-ide-v2.10:CW-MPC55XX_56XX NXP] | ||
<br/> | <br/> | ||
Revision as of 15:28, 24 February 2023
Raptor GCM80
The GCM80 is a general-purpose control module with four CAN buses, one LIN bus and a large variety of I/O. It also has a secondary processor making it capable of working safety-critical applications.
The GCM80 is part of a family of rugged, automotive-grade production controllers that use New Eagle's software development process based on MATLAB/Simulink, Raptor-Dev. Raptor-Dev significantly speeds up algorithm development by using automatic code generation. In addition, developers can quickly test application software on their PCs with a built-in onscreen PC simulation.
Version Differences
| New Eagle Part Number | GCM-5607B-080-1901 | GCM-5607B-080-1903 | GCM-5607B-080-2002 |
|---|---|---|---|
| Internal Termination | |||
|
CAN1 Termination (120Ω between B-A1 and B-B1) |
Yes |
No |
Yes |
|
CAN2 Termination (120Ω between B-C1 and B-D1) |
Yes |
No |
Yes |
|
CAN3 Termination (120Ω between B-E1 and B-F1) |
Yes |
No |
Yes |
|
CAN4 Termination (120Ω between A-K2 and A-J2) |
Yes |
No |
Yes |
| Internal Shunts | |||
|
0Ω Shunt between AF4/AK3 |
Yes |
No |
No |
|
0Ω Shunt between AF3/AK4 |
Yes |
No |
No |
|
0Ω Shunt between AE3/AJ4 |
Yes |
No |
No |
|
0Ω Shunt between AE4/AJ3 |
Yes |
No |
No |
Downloads
GCM-5607B-80-1901
GCM-5607B-80-1903
GCM-5607B-80-2001
Pins and Crimping
CAD Model
Compiler
Code Warrior 2.10 Available from NXP
Frequently Asked Questions (FAQ)
There are no FAQs for this page.