RCM-58NN-112: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
Line 16: Line 16:


=== Compilers ===
=== Compilers ===
Currently, the ST58 SPC5-Studio Compiler and HiTec PowerPC 4.9 Compiler are available for the RCM112. Additional compilers may be available in the future.


<!--Three options will be available for the RCM112.  For ASIL-C or D, use the Hitec PowerPC 4.9.  For non-ASIL, use either the GCC ST58 or NXP S32 Free compilers.  Contact Sales around compiler use and compatibility
====S32 Design Studio for Power Architecture v2.1====
Please reference the following Document to download and install the compiler from NXP's website.  Note - this compiler has not been validated with the RCM112 builds
:'''[https://wiki.neweagle.net/ProductDocumentation/Raptor/Controllers/S32%20Design%20Studio%20for%20Power%20Architecture%20v2.1%20Compiler%20Install%20Guide.pdf GCC For RCM112 Compiler Installation Guide]''' -->
Currently, the ST58 SPC5-Studio Compiler and Hitec PowerPC 4.9 Compiler are available for the RCM112. Additional compilers may be available in the future.
====ST58 SPC5-Studio====
====ST58 SPC5-Studio====
:'''[https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/spc5-software-development-tools/spc5-studio.html ST58 GCC]'''
:'''[https://www.st.com/content/st_com/en/products/development-tools/software-development-tools/spc5-software-development-tools/spc5-studio.html ST58 GCC]'''


====Hitec for Power Architecture====
====Hitec for Power Architecture====
 
:'''[https://hightec-rt.com/en/support/license/evaluation.html HiTec for RCM112]'''
:'''[https://hightec-rt.com/en/support/license/evaluation.html Hitec for RCM112]'''


===CAD Model===
===CAD Model===
To obtain the CAD file for the RCM112 Enclosure, Please submit a ticket to our '''[https://support.neweagle.net Support Portal]''' requesting access.
To obtain the CAD file for the RCM112 enclosure, please submit a ticket to our '''[https://support.neweagle.net support portal]''' requesting access.


== Frequently Asked Questions (FAQ) ==
== Frequently Asked Questions (FAQ) ==

Revision as of 16:46, 9 March 2023

Overview

The RCM112 is a Raptor general-purpose control module with four CAN-FD buses, one LIN Master/Slave, a 2-Wire Ethernet, four SENT channels and configurable discrete inputs and outputs including analog inputs, frequency inputs, a wake input, high- and low-side driver outputs, and four Half-Bridges.

The RCM112 is one of the Raptor rugged production controllers that use a software development process based upon MATLAB/Simulink, Raptor-Dev. Raptor-Dev significantly speeds up algorithm development by using automatic integration and code generation. In addition, developers can quickly test application software using simulation and automated testing.

Downloads

Datasheets

RCM-58NN-112-2007

Datasheet

RCM-58NN-112-2103

Datasheet

RCM-58NN-112-2202

Datasheet

Compilers

Currently, the ST58 SPC5-Studio Compiler and HiTec PowerPC 4.9 Compiler are available for the RCM112. Additional compilers may be available in the future.

ST58 SPC5-Studio

ST58 GCC

Hitec for Power Architecture

HiTec for RCM112

CAD Model

To obtain the CAD file for the RCM112 enclosure, please submit a ticket to our support portal requesting access.

Frequently Asked Questions (FAQ)

The most up to date ECU information is found on the support portal

Q: What is new with the RCM112-2103 

    A: The RCM112-2103 now contains 16 HSO and 16 LSO instead of 15 HSO and 17 LSO in the RCM112-2007.

Q: What is new with the RCM112-2202 

    A: The RCM112-2202 has some under-the-hood optimizations as well as internal changes to help hit low power sleep-current draws. Additionally, the 4 Sensor Power Outputs now have independent enable signals in Raptor.

Webstore

Webstore: 112-Pin General Control Module

Webstore: All Control Modules

Other Modules

Back to: Controllers

Retrieved from "https://wiki.neweagle.net//index.php?title=RCM-58NN-112&oldid=32830"