Cascadia Motion (Rinehart Motion): Difference between revisions
| Line 155: | Line 155: | ||
==Downloads== | ==Downloads== | ||
'''[http://www.neweagle.net/support/wiki/docs/Rinehart/PM150DXdata.pdf PM100DX / PM120DX / PM150DX Family Datasheet]''' | '''[http://www.neweagle.net/support/wiki/docs/Rinehart/PM150DXdata.pdf PM100DX / PM120DX / PM150DX Family Datasheet]''' | ||
Revision as of 20:36, 28 September 2011
Product Summary
PM100DX
The PM100DX is an AC Traction Controller designed for on- and off-road Electric (EV) or Hybrid Electric (HEV) applications. The Traction drive is fabricated using a patented high heat flux thermal design approach that dramatically reduces the size and weight of the finished drive, and improves its life in the automotive environment. With extensive experience in automotive and military vehicle traction and power electronics applications, RMS has achieved a major breakthrough in integrating Traction Control into a vehicle.
PM100DZ
The PM100DZ is a higher voltage version of its sister product, the DX line.
PM100 Family
RMS is introducing more members of the PM-Series drive family. These AC Traction Controllers are designed for on- and off-road Electric (EV) or Hybrid Electric (HEV) applications. The PM-Series family is fabricated using a patented high heat flux thermal design approach that dramatically reduces the size and weight of the finished drive, and improves its life in the automotive environment. The company has extensive experience in automotive and military vehicle traction and power electronics, and produces the smallest, lightest drives for HEV propulsion in everything from tow vehicles to the pinnacle of motorsports. RMS has achieved a major breakthrough in integrating Electronic Traction into any vehicle. The PM100 model is in production while the PM150 model is still in development.
Electric Motors Supported by the RMS Traction Inverter
- Siemens/Ford Ranger Induction Motor
- Remy HVH250 PM Motor
- Siemens 1PV5135-4WS28
- Parker PM Motor
- Remy HVH250HT Motor (In Development)
- EVO AF-140-12 PM Motor
- MES Induction motor
- UQM-75 Motor
- Numerous Customer, Proprietary Installations
CAN Interface for RMS
MotoHawk CAN Library for RMS PM100
MotoHawk CAN Library for RMS PM100
Supports version 1.0, Sept 30, 2009 CAN ICD. Request more information on the MotoHawk library at sales@neweagle.net. This library and the RMS PM family of inverters integrates well with the New Eagle EV Supervisory Control system, and furthermore makes a nice EV Powertrain combination with one of the supported motors.
CAN Configuration Parameters
See RMS downloads below for the CAN Protocol for the RMS inverters.
Rinehart Motion FAQs
Approximate Weight
The PM100DX weighs approximately 19lbs or 8.62kgs
Installation
Step by step instructions to installing a Rinehart Motion Inverter using a Remy Motor. This document describes the multiple types of Remy motors. It also describes the process to set up the motor type.
Setting up the PM Controller to run with Remy Motors
What is the Switching Frequency on the PM100
12 Khz
Firmware Release Notes
Current version SWRP 14A, 7 June 2011
Last version is 13-B1, 3 March, 2011
Click here to download the Firmware release notes and download the software tools.
Features:
- None
Bug Fixes:
- Fixed the issue where HW faults were not cleared by the “Clear Fault Command”, both through CAN and RMS GUI.
Version: 12E-1, 9 November, 2010
Features:
- Updated current regulators for improved performance
- Updated flux weakening regulator
Bug fixes:
No bugs found!
Version - 12D, 27 September, 2010
Features:
- Changed the SW Over-current limit to 550 Amps for HW versions 0, 2, 2340, and 2342.
- Added a current proportional gain schedule
- For SCI broadcast, used non-filtered values instead of filtered values for more accurate diagnostics.
- Added Id and Iq commands to CAN broadcast message 0x0AD.
- For motor type 1, updated following parameters:
- Leakage is set to 1.0 instead of 0.57735
- Kp Current is set to 1.0 instead of 2.0
- Mod Limit is set to 1.10 instead of 1.20
Bug fixes:
- Fixed the bug that was causing the speed resolution to be 2 rpm minimum.
- Corrected resolution on ‘Modulation’ parameter for CAN broadcast message.
Minor Release 12A,
Features: This is a minor release with the following updates:
- Added Delta Resolver Filtered to the broadcast message 0x0A5.
- Added a new broadcast message 0x0AD to send Modulation Index and Flux Weakening Output information.
- Added Inverter Enable State and Direction Command to byte 6 and 7 respectively, to the broadcast message 0x0AA.
RMS Traction Inverters in the News
EV Conversions
EV Powertrain for Light to Medium Duty Trucks
Electric Race Motorcycle
Green Car Congress
Debut of the RMS PM Family of Drives
http://www.greencarcongress.com/2006/10/rinehart_motion.html
Electric Drive for Siemens Ballard AC Induction Drive
Contact sales @(at) neweagle.net - http://www.diyelectriccar.com/forums/showthread.php/ford-ev-motors-siemens-ballard-26120.html
Evolve It Motors
http://evolveitmotors.com/solutions/
Downloads
PM100DX / PM120DX / PM150DX Family Datasheet
PM100 Housing Dumb Solid CAD Drawing