ECM-564x-112: Difference between revisions
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
The ECM-OH is compatible with MotoHawk 2012b or later only. No older MotoHawk. | The ECM-OH is compatible with MotoHawk 2012b or later only. No older MotoHawk. | ||
===Datasheet | ===Datasheet Errata=== | ||
The Datasheet says there are 8 injectors, 6 of which are peak-hold. This plan was the initial production intent, but it has changed. All production releases will only have 6 peak-hold injectors. | The Datasheet says there are 8 injectors, 6 of which are peak-hold. This plan was the initial production intent, but it has changed. All production releases will only have 6 peak-hold injectors. | ||
===Availability=== | |||
Calibratible versions are available now. Flash or production will be available in 2Q2013. | |||
===Datasheet=== | ===Datasheet=== | ||
'''[http://neweagle.net/support/wiki/docs/Datasheets/36364_v5OH.pdf ECM-OH Datasheet]''' | '''[http://neweagle.net/support/wiki/docs/Datasheets/36364_v5OH.pdf ECM-OH Datasheet]''' | ||
Revision as of 19:13, 4 February 2013
The ECM-OH is a nice addition to the MotoHawk engine control line-up. It is a 24V engine controller for on-road applications.
The module is capable of full authority digital engine control (FADEC) consisting of fuel, spark, and air delivery to the engine. Additional inputs and outputs are available to control other system functions, as defined by software. This unit provides 112 connector pins with inputs, outputs, and communications interfaces that support a wide variety of applications.
The ECM-OH is part of the MotoTron Control Solutions ControlCore® family of embedded control systems. The ControlCore operating system, MotoHawk® code generation product, and MotoHawk’s suite of development tools enable rapid development of complex control systems.
Each controller is available in ‘F’ (Flash) or ‘C’ (Calibratible) versions. Flash modules are typically used for production purposes. Calibratible modules are typically for prototyping/development only; they can be calibrated in real time using MotoTune® or ToolKit.
Compiler Information
S12 micro (the saftey processor) requires Freescale Codewarrior 4.6.
The MPC5XXX micro uses either the GCC eabi SPE 4.6, or GHS 4.2.1 and 4.2.4.
Watchdog Function
The ECM-OH will have an ETC monitoring microprocessor and the main power supply will have a HW watchdog that needs to be tickled by the main core processor.
Flexible Encoder
The ECM-OH will work with the flex encoder.
MotoHawk Compatibility
The ECM-OH is compatible with MotoHawk 2012b or later only. No older MotoHawk.
Datasheet Errata
The Datasheet says there are 8 injectors, 6 of which are peak-hold. This plan was the initial production intent, but it has changed. All production releases will only have 6 peak-hold injectors.
Availability
Calibratible versions are available now. Flash or production will be available in 2Q2013.