Connector Crimp and Removal Tools: Difference between revisions
| Line 76: | Line 76: | ||
[[Image:TOOL-CON-019.jpg|250px]] | [[Image:TOOL-CON-019.jpg|250px]] | ||
:*'''[http://store.neweagle.net/ | :*'''[http://store.neweagle.net/terminal-removal-tool-molex-1-5mm-for-112-pin-controller.html Webstore: Terminal Removal Tool-1.5MM Gel]''' | ||
==Tool-CON-019-MATTE== | ==Tool-CON-019-MATTE== | ||
Revision as of 21:07, 12 March 2013
Tool-Con-001-00
This tool is used for crimping SmartCraft terminals.
Tool-CON-002
This is the tool used for hand crimping 24 pin module connector terminals.
Tool-CON-004
This is the tool used for removing the purple cap in a SmartCraft connector.
Tool-CON-005
This tool is used to remove various terminals, including SmartCraft terminals.
Tool-CON-008
This tool is used to crimp terminals for the 48/80/128 pin controllers.
Tool-CON-009
This tool is the extraction tool for the 48/80/128 pin ECUs.
Tool-CON-016
This is the crimping tool for the .63MM Gel 112 terminals.
Tool-CON-016-MATTE
This is the crimping tool for the .63MM Matte 112 sockets.
Tool-CON-017
This is the crimping tool for the 1.5MM Gel 112 terminals.
Tool-CON-17-MATTE
This is the crimping tool for the 1.5MM Matte 112 sockets.
Tool-CON-018
This is the removal tool for the .63MM Gel 112 pin ECM terminals.
Tool-CON-018-MATTE
This is the removal tool for the .63MM Matte 112 pin ECM terminals.
Tool-CON-019
This is the removal tool for the 1.5MM for the 112 Pin ECM Gel terminals.
Tool-CON-019-MATTE
This is the removal tool for the 1.5MM for the 112 Pin ECM Matte terminals.
