Template:Controller Matrix: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
| Microcontroller || Clock Frequency || Internal Flash || External Flash || EEPROM || Internal SRAM || External SRAM || Supply Voltage || Emergency stop inputs || Switch inputs || Frequency inputs || Crank position input type || Analog Inputs (10-bit) || Knock Inputs || O2 Sensor Inputs || High current drivers (10A) || Medium current drivers (3A) || Current controlled drivers || Low current drivers (500ma) || Relay drivers (<250ma) || Main Power Relay low-side driver || Injector Drivers || Logic outputs or spark triggers || Direct ignition coil drivers || Low Current H Bridge Driver || High Current H Bridge Driver || Sensor Excitation || CAN 2.0B || USB 1.1 || Serial || Shutdown || Operating Temp Range || Construction || Connector || Motohawk or SIMULINK || style="width: 1.5%; height=50px" | C API | | Microcontroller || Clock Frequency || Internal Flash || External Flash || EEPROM || Internal SRAM || External SRAM || Supply Voltage || Emergency stop inputs || Switch inputs || Frequency inputs || Crank position input type || Analog Inputs (10-bit) || Knock Inputs || O2 Sensor Inputs || High current drivers (10A) || Medium current drivers (3A) || Current controlled drivers || Low current drivers (500ma) || Relay drivers (<250ma) || Main Power Relay low-side driver || Injector Drivers || Logic outputs or spark triggers || Direct ignition coil drivers || Low Current H Bridge Driver || High Current H Bridge Driver || Sensor Excitation || CAN 2.0B || USB 1.1 || Serial || Shutdown || Operating Temp Range || Construction || Connector || Motohawk or SIMULINK || style="width: 1.5%; height=50px" | C API | ||
|- | |- | ||
| ECM S12-24|| In production || Freescale HCSS12 || 24 MHz || 128K || || 2k Internal || 2k || || 8-16V || || || || VR/Hall mode SW selectable || 7-12 || || 1 single ended ego || || 1-4 low-side || || 1 low side || || || 1 (up to 4 high impedance loads) || 0 or 3 (5V) triggers || || 0 or 1 (5A) w/current sense || || 1 (5V) Sensor supply (250ma max) || 1 or 2 || || || not SW controlled || -40C to 105C || Plastic Housing || 24-Pin Delphi || | | ECM S12-24|| In production || Freescale HCSS12 || 24 MHz || 128K || || 2k Internal || 2k || || 8-16V || || || || VR/Hall mode SW selectable || 7-12 || || 1 single ended ego || || 1-4 low-side || || 1 low side || || || 1 (up to 4 high impedance loads) || 0 or 3 (5V) triggers || || 0 or 1 (5A) w/current sense || || 1 (5V) Sensor supply (250ma max) || 1 or 2 || || || not SW controlled || -40C to 105C || Plastic Housing || 24-Pin Delphi || yes || | ||
|- | |||
| ECM S10-60 || Call for availablity || ST Micro F273M || 40MHz || 512K || || 2K (off-microcontroller) || || 32K || 6-24 V || || 3 || 1 Differnetial VR/2 Hall || || 6 || || 2 EGO sensor circuits || || || || 6 short-protected || 2 short-protected || || || || 2 || || || || 2 || || 1 || || -40C to +105C || || 60-pin Tyco || Available || yes | |||
Revision as of 20:12, 15 August 2013
| Platform | Availability | Core | Memory | Inputs | Outputs | COMM | Environment | software | |||||||||||||||||||||||||||||
| Microcontroller | Clock Frequency | Internal Flash | External Flash | EEPROM | Internal SRAM | External SRAM | Supply Voltage | Emergency stop inputs | Switch inputs | Frequency inputs | Crank position input type | Analog Inputs (10-bit) | Knock Inputs | O2 Sensor Inputs | High current drivers (10A) | Medium current drivers (3A) | Current controlled drivers | Low current drivers (500ma) | Relay drivers (<250ma) | Main Power Relay low-side driver | Injector Drivers | Logic outputs or spark triggers | Direct ignition coil drivers | Low Current H Bridge Driver | High Current H Bridge Driver | Sensor Excitation | CAN 2.0B | USB 1.1 | Serial | Shutdown | Operating Temp Range | Construction | Connector | Motohawk or SIMULINK | C API | ||
| ECM S12-24 | In production | Freescale HCSS12 | 24 MHz | 128K | 2k Internal | 2k | 8-16V | VR/Hall mode SW selectable | 7-12 | 1 single ended ego | 1-4 low-side | 1 low side | 1 (up to 4 high impedance loads) | 0 or 3 (5V) triggers | 0 or 1 (5A) w/current sense | 1 (5V) Sensor supply (250ma max) | 1 or 2 | not SW controlled | -40C to 105C | Plastic Housing | 24-Pin Delphi | yes | |||||||||||||||
| ECM S10-60 | Call for availablity | ST Micro F273M | 40MHz | 512K | 2K (off-microcontroller) | 32K | 6-24 V | 3 | 1 Differnetial VR/2 Hall | 6 | 2 EGO sensor circuits | 6 short-protected | 2 short-protected | 2 | 2 | 1 | -40C to +105C | 60-pin Tyco | Available | yes | |||||||||||||||||