This block implements PGN 65232 Test Results For Non-Continuously Monitored Systems (DM8).
Inputs
Input
Type
Description
Outputs
Output
Type
Description
Test ID[]
uint8[]
Test identifiers, all test identifier values must be the same when multiple test results are reported in one DM8 response
Test Type[]
uint8[]
Test Type/Component Identifier
Test Value[]
uint16[]
The test value collected during the test. If the test performed does not have both a test limit minimum and maximum, then the appropriate limit value (Maximum or Minimum) should be set to all ones. SAE J1939-71 defines this to mean not available.
Test Maxiumum[]
uint16[]
Test Minimums, The test value must be less than or equal to Test Limit Maximum in order for the test to pass.
Test Minimum[]
uint16[]
Test Maximums, The test value must be greater than or equal to Test Limit Minimum in order for the test to pass.
