This block searches through all the faults which are in one of the specified states. The block begins searching at the next fault after the specified previous fault. If the previous fault input is set to the null fault the search will begin at the start of the fault list. When the block reaches the end of the fault list without finding any faults causing the action to be true it will output the null fault. This can be used as a stop condition if executing this block in a while loop to iterate through a sequence of faults.
Inputs
Input
Type
Description
Outputs
Output
Type
Description
Parameters
Parameter
Type
Description
Suspected
Finds faults in the Suspected state.
Failed This Drive Cycle
Finds faults in the Failed This Drive Cycle state.
Test Completed This Drive Cycle
Finds faults in the Test Completed This Drive Cycle state.
Failing
Finds faults in the Failing state.
Pending
Finds faults in the Pending state.
Confirmed
Finds faults in the Confirmed state.
MIL
Finds faults in the MIL state.
Permanent
Finds faults in the Permanent state.
Ready
Finds faults in the Ready state.
Previously Confirmed
Finds faults in the Previously Confirmed state.
Failed Since Last Clear
Finds faults in the Failed Since Last Clear state.
Failed Last Drive Cycle
Finds faults in the Failed Last Drive Cycle state.
