Raptor:DTC Send
Return to the main Raptor page
Description
This block is used by many of the DM blocks which must return a list of faults in a given state. It should not be used without fully understanding underlying mechanisms of the Raptor OBD Fault Manager.
Inputs
| Input | Type | Description |
|---|---|---|
| tx_src | uint8 | Transmit Source Address |
| tx_dst | uint8 | Transmit Destination Address |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| J1939 Bus Name | String | This is the name of the J1939 bus. |