Return to the main Raptor page
Return to Input & Output page
Raptor™ PWM Output
Description
This block sets the state of the selected PWM output. PWM (pulse width modulation) is typically used similar to an analog output.
Inputs
| Input
|
Type
|
Description
|
| Duty Cycle
|
uint16
|
The duty cycle of the output in 0.01%. For example raw value 500 = 5%.
|
| Frequency
|
uint32
|
The frequency of the output in 0.01Hz. For example raw value 40000 = 400Hz.
|
Outputs
Parameters
| Parameter
|
Type
|
Description
|
| Hardware Resource
|
|
Specifies which input from the hardware is being read.
|
| Driver Type
|
|
Specifies the type of driver to be used on the selected output.
|
