Raptor:Table Axis

Description

The Raptor Table Axis is similar to the Matlab Prelookup block. This block calculates the fractional index of the input value into the breakpoint data. Use this block to calculate the index inputs for the Raptor Interpolate 1d and Raptor Interpolate 2d blocks.

Inputs

Input	Type	Description
[datatype]		Input signal to the table axis, data type should be the same as the axis data.

Outputs

Output	Type	Description
index		Fractional index to use with an interpolation table.

Parameters

Parameter	Type	Description
Name	String	This is the name used to store the axis data. It is also used to identify the axis in the calibration tool.
Initial Value	Vector	This is the initial breakpoint data.
Data Type		Specifies the data type of the breakpoint data and input port.
Storage		Specifies the storage class of the breakpoint data.
Visible in Cal Tool		Controls the visibility of the breakpoint data in the calibration tool.
Gain	Number	This controls the scaling used to display the data in the cal tool. display value = (Gain * actual value) + Offset
Offset	Number	This controls the scaling used to display the data in the cal tool. display value = (Gain * actual value) + Offset
Max	Number	Sets the maximum value that can be set to any breakpoint data point in the calibration tool.
Min	Number	Sets the minimum value that can be set to any breakpoint data point in the calibration tool.
Format	Format String	Sets the display format to use in the calibration tool.
Unit Text	String	Sets the unit text that is displayed in the calibration tool.
Help Text	String	Sets the help text that is displayed in the calibration tool.
Access Level		Sets the access level of this item in the calibration tool.
Function	String	Sets the location where the variable appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.

Supported Versions

Raptor 2013a_0.0.1 and newer