Displays
MotoHawk's MiniView
This rugged display unit is capable of operating in harsh marine and off-highway applications. Designed to operate with the MotoHawk® line of rugged controllers, the circular display (65 pixels high, 65 pixels wide, 4 built-in fonts, adjustable backlight) is controlled from the customer application via the MiniView CAN interface, typically using the MotoHawk® block set.
- Features include:
- Low operating temperature (-40 degrees)
- CANbus data link
- Comes with SmartCraft connector
- IP-X7 Marine Protection Rating
- Rugged Case
Application Note
MiniView comes with a fixed CAN baud rate of 250kbps (not configurable via the MotoHawk block set). The CAN ID’s are also not configurable.
Data Sheet
Download the MiniView data sheet
Purchase MiniView
Click Here to Purchase MotoHawk's MiniView (ASM-GAGE-001)
Kongsberg Embedded Displays
CANtrak 2600
The CANtrak 2600 is an intelligent, multi-function display. It monitors numerous CAN based messages and displays the current status of user defined parameters. With its J1939 or custom CAN capability, the CANtrak offers easy integration into a CAN-based control system of MotoHawk® or 3rd party electronics for virtually any type of on-road or off-road vehicle.
- Features include:
- 3.8" Graphical high resolution LCD Display, Rugged ABS Case
- IP67 Protection Rating
- Low operating temperature: -25C
- RS232, J1708/J1587 and CANbus datalink compatible
- Front and rear mountable, CE Approved design
Purchase CANtrak 2600
Click Here to Purchase CANtrak 2600
CANtrak 2610
Similar to the CANtrak 2600, CANtrak 2610 is an intelligent, multi-function display, offering easy integration into a CAN-based control system of MotoHawk®.
- Features include:
- 3.8" Graphical high resolution LCD Display, Rugged ABS Case
- IP67 Protection Rating
- Low operating temperature: -40C
- RS232, J1708/J1587 and CANbus datalink compatible
- Front and rear mountable, CE Approved design
Purchase CANtrak 2610
Click Here to Purchase CANtrak 2610
CANtrak 2600/2610 Data Sheets
CANtrak 2600 and 2610 Datasheets
CANtrak 2610 CSA Certified
- Features include:
- Class I, Division 2, Groups A, B, C, D
- 3.8" Graphical high resolution LCD Display, Rugged ABS Case
- IP67 Protection Rating
- Low operating temperature: -40C
- RS232, J1708/J1587 and CANbus datalink compatible
- Front and rear mountable, CE Approved design
Purchase CANtrak 2610
Click Here to Purchase CANtrak 2610 Certified
More CANtrak
Click Here for CANtrak Connecting and Programming Help and General CANtrak Questions
Click Here to see other Kongsberg Products
Veethree
CANvu 400N
CANvu 400N is a next generation CAN bus display. It is highly sealed and provides tough, flexible instruments ready to face the challenges of harsh environments. CANvu 400N has a brightness rating of 400 NIT for indirect sunlight. The Veethree Engine Monitor (VEM) software displays transmitted J1939 engine and transmission data and active alarms where supported. The VEM application software runs on the CANvu robust industrial graphical displays. The VEM offers user selectable icon based display layouts and includes a comprehensive multi language text based fault warning and acknowledgement system.
- Features include:
- Color Display - Indirect Sunlight Readable
- J1929/Tier 4, 3.5 inch display for indirect sunlight
- QVGA graphical high resolution 320 x 240 color
- Max brightness of 400 NIT on the unit
- Fully sealed to IP67 using molded in 12 way Deutsch connector
- 4 serial comm ports: CAN bus, RS232, USB and RS485
- Screens can be “locked” to prevent changes
- Optional Service Interval Timer Alarm
- Data is available in several formats and measurement units
Purchase CANvu 400N
Click Here to Purchase CANvu 400N
CANvu 800N
CANvu 800N is the next generation of compact, highly flexible, rugged CAN bus displays. CANvu 800N has a brightness rating of 800 NIT for full sunlight. The Veethree Engine Monitor (VEM) software displays transmitted J1939 engine and transmission data and active alarms (from DM1) where supported. The VEM application software runs on the CANvu robust industrial graphical displays. The VEM offers user selectable icon based display layouts as well as including a comprehensive multi language text based fault warning and acknowledgement system.
- Features include:
- Color Display - Fully Sunlight Readable
- J1939/Tier 4, 3.5 inch display for full sunlight
- QVGA graphical high resolution 320 x 420 color
- Max brightness of 800 NIT on the unit
- Fully sealed to IP67 using molded in 12 way Deutsch connector
- 4 serial Comm ports: CAN bus, RS232, USB and RS485
- Screens can be “locked” to prevent changes
- Optional Service Interval Timer Alarm
- Data is available in several formats and measurement units
Purchase CANvu 800N
Click Here to Purchase CANvu 800N
CANu Data Sheets
CANtrak Connector Kits
CANtrak Deutsch Connector Kit
CANtrak Deutsch Connector Mating Half Kit for use with both 2600 & 2610 Displays
Purchase CANtrak Deutsch Connector Kit
CANtrak Connector Mating Kit
Deutsch Connector Mating Half Kit - both connectors.
Purchase CANtrak Connector Mating Kit
CANtrak Harnesses
CANtrak Configurable Input Harness
CANtrak Configurable Input Module Harnesses - Development Cable Set
Purchase CANtrak Configurable Input Harness
CANtrak Display Power Harness
This pre-assembled power harness for CANtrak consists of a mating connector to plug into the display and 1.5m long flying leads for connection to the vehicle or equipment.
Alternatively, a connector kit is available for customers wishing to manufacture their own wiring harnesses.
Purchase CANtrak Display Power Harness
Other Accessories
CANtrak GEM Software
The Generic Engine Monitor (GEM) is a powerful and extremely versatile software that allows the user to connect the CANtrak 2600 Display directly to the J1939/J1587 network on their vehicle or equipment. It displays comprehensive information on engine and transmission data and activates and stores alarms (where supported).
- Features include:
- Plug and go solution for the display of J1939 and J1587 transmitted engine and transmission data
- Compatible with most diesel engines
- Adjustable contrast and backlight
- ISO and SAE standard icons are used for the parameters
- Menu and text based alarm systems are in multiple languages
- Flexible display options: multi-window screens, with analogue gauge, digital text or graphics
Click Here to see GEM CANtrak Datasheets and Manuals
Purchase CANtrak GEM 2610 Software
CANtrak Module Starter Kit
Starter Kits combines all of the hardware and software necessary for the programmer to start developing applications for use with the CANtrak 2600/2610:
- module
- software
- tutorial
- harnesses
- PSU
Purchase CANtrak Module Starter Kit
CANtrak Mounting Kit
For a standard front mount. This kits consists of a set of nylon studs and thumb nuts.
CANtrak Behind-Dash Mounting Bracket Kit
Used to mount CANtrak Models 2600 and 26199 from the rear of a panel with a suitable cut-out. Only need to fix four studs to the rear of the panel.
Purchase CANtrak Behind-Dash Mounting Bracket Kit
CANtrak Configurable Module Tool
The CCDM (CANtrak Configurable Display Module) allows the user to quickly display 29 bit or 11 bit data from the CAN bus on a variety of gauge styles on a CANtrak 2600 or CANtrak 2610 without the need for programming in software languages such as C or C++. A non-software programmer can easily and quickly produce multiple screens of various styles of gauges without having to write even one line of code.
- Features include:
- Display up to 40 Gauges
- User settable Internal Alarms per Parameter
- External DM1 Alarms
- Choice of languages
- Selectable Baud rate
- CANbus 29 bit or 11 bit mode
- Customizable PGN request
- Customizable buttons and start up logo/screen
- (Software Tool Supplied on CD ROM )