Raptor:Modbus Master
Return to the main Raptor page
Description
This block acts as a Modbus master on a serial bus.
Inputs
| Input | Type | Description |
|---|---|---|
| Node | uint16 | The address of the slave device to request from. |
| Register Address | uint16 | The register address to be read. |
| Read length | uint16 | The number of registers to be read. |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Name | String | This is the name of that will appear in the calibration tool. The name must be a valid C identifier. |