Raptor Unified Diagnostic Service

UDS SUPPORT ON RAPTOR

Support for the industry standard ECUs

Features

Model-Based Embedded Development
Production-Ready:
- Workflow
- Calibration Capabilities
- Hardware & Tools
Application Configuration & Monitoring

UDS

The Raptor UDS Block set provides a Raptor application with an interface to a PC-based diagnostics application or a scan tool. Raptor UDS covers both the On Board Diagnostics (ISO15031-5) and the Unified Diagnostic Services (ISO 14229) and uses the ISO15765 specification for the CAN transport layer.

UDS is a way to provide the Raptor application with the capability of reporting self-diagnostics and trending information. The Raptor UDS Block set does not provide diagnostics. The diagnostics must be provided by the application designer and then integrate the blockset with their diagnostic capabilities and the mechanism for reporting the diagnostic information via a standardized protocol.

The UDS handler mask informs the application that the ISO15031 and ISO14229 services are desired.

The UDS block set can be used to provide the following services:

Diagnostic Trouble Codes (DTC) reporting / clearing
Suspension of DTC logging
Emissions
Parameter reading / writing
Overrides
On demand self tests
Snapshot records
Module reflashing (requires bootloader support)

New Eagle Support for Unified Diagnostic Service (UDS)

ISO block set provides interface to PC based diagnostic application or scan tool
- Used to create UDS Server
Provides select ISO 14229-1 Unified Diagnostic (UDS) and ISO 15031 On Board Diagnostics (OBD) Services
Provides the application with the capability of reporting self-diagnostics and trending information
Integration Service is included in the sale of the UDS block set

  View available platforms on our website: http://neweagle.net/raptor.  For more details or questions, contact our Sales Team at sales@neweagle.net.
  Along with support for your preferred build environment, you are able to use the remaining tools in the Raptor platform for calibration, testing, end-of-line, etc.

Two Levels of Licensing: UDS Basic & UDS Enhanced

Basic

Basic level covers the absolute minimum services needed for a basic UDS application:

Retrieve/Clear power-train diagnostic information
Shut down unnecessary communications when updating system software
Shut down diagnostics when updating system software
Resetting the ECU
Reading and writing data
Raw UDS data Transfer/Receive
Implementation of diagnostic fault messaging as required by regulating bodies (CARB/EPA) including efficient cooperation with the built-in Raptor OBD Fault Manager

Specific Services:

- ISO 15031-5 Service 0x01 – Current Power-train Diagnostic Data
- ISO 15031-5 Service 0x09 – Request Vehicle Information
- ISO 14229-1 Service 0x10 – Session Control
- ISO 14229-1 Service 0x11 – ECU Reset
- ISO 14229-1 Service 0x14 – Clear Diagnostic Information (R2020b)
- ISO 14229-1 Service 0x19 – Read DTC Information (no snapshots) (R2020b)
- ISO 14229-1 Service 0x22 – Read Data by Identifier
- ISO 14229-1 Service 0x28 – Communication Control (R2020b)
- ISO 14229-1 Service 0x2E – Write Data by Identifier
- ISO 14229-1 Service 0x3E – Tester Present
- ISO 14229-1 Service 0x85 – DTC Control Setting (R2020b)

Enhanced

Enhanced level covers more advanced features such as:

All "Basic" Functionality
Restricting the access via a security function
Freeze frame data and Snapshots
Emissions-related DTC retrieval
IO Control and Routine Control