Sevcon Traction Inverter
Sevcon
Product Summary
Gen4 Series
Thanks to the high efficiency it is possible to integrate these controllers into very tight spaces without sacrificing performance. The design has been optimised for the lowest possible installed cost while maintaining superior reliability in the most demanding applications. Multiple sizes available
Features
- Absolute UVW encoder input
- AC induction motor
- Up to 80V DC supply voltage
- Up to 780A Boost current (650A Peak)
- Integrated fuse holder
- Advanced flux vector control
- Hardware & Software failsafe
- IP66 Protection
Datasheet & Manual
Click here for GEN4 Series Datasheet
A manual is available with NDA and direct contact with sales. Please Contact Sales
Gen4 Size 8
This AC motor controller has been designed to meet the high performance requirements of on-road and off-road electric and hybrid electric vehicles. A compact, rugged and cost-effective design, the Gen4 S8 is well suited for EV OEMs, EV conversions and EV drive train system integrators.
Supported Motors
- Remy 250-115-DOM
- Remy 250-90-DOM
Click here for Remy motor information
Features
- AC permanent magnet synchronous motor
- AC induction motor
- Up to 400V DC supply voltage
- Up to 100kW peak power output
- Integrated logic circuit
- Includes an additional dedicated safety supervisory processor
- Will have dual processing and conform to automotive safety standards
- IP66 Protection
Datasheet & Manual
Click here for Datasheet
A manual is available with NDA and direct contact with sales. Please Contact Sales
Webstore
Gen4 Size 10
An AC motor controller designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV). Its high voltage range, up to 800VDC, is well matched to the needs of the automotive and commercial transport markets. The same hardware platform handles both AC Induction and Permanent Magnet AC motor technologies.
Features
- Up to 800V DC peak supply voltage
- Up to 300kW peak power output
- Up to 150kW continuous power output
- Advanced flux vector control
- 12V or 24V nominal supply
- Integrated logic circuit
- Includes an additional dedicated safety supervisory processor
- Designed for ISO26262 ASIL C compliance
Datasheet
Click here for Datasheet
Frequently Asked Questions (FAQ)
What inverter matches to the YASA Motor? SEV-GEN4-S10-002
Gen 5 Series
The Gen5 range of motor controllers utilise a highly flexibility control logic architecture to deliver unique feature rich set of functions is well matched to satisfy automotive, commercial and construction markets electrification needs. The range of High Voltage High Power (HVHP) controllers is specifically aimed at vehicle OEM’s and system integrators to offer them a compact, lightweight, rugged and cost effective class leading suite of solutions covering traction, hybridisation, power generation and sub-system electrification.
Features
- Operating voltage range 128V to 450VDC Output motor phase current.
- Supports all of the industry standard motor and sensors types.
- Resolver input (adjustable gain).
- Absolute Sin/Cos encoder input.
Datasheet
Click here for SEV-GEN5 Datasheet
HVLP 10
Features
- 200V to 800VDC battery voltage
- Up to 53A peak current (HVLP-20)
- Up to 33A continuous current (HVLP-20)
- Advanced flux vector control
- 12V or 24V nominal supply
- High Voltage Interlock (HVIL)
- CAN J1939 compatible
- AC Permanent Magnet synchronous motor
- AC Induction motor
- Resolver, Sin/Cos, AB or absolute UVW
- encoder (hall effect) sensing systems
- Robust all alloy housing IP6K9K - IP67
Datasheet
Click here for Datasheet
HVLP 20
A new range of low power AC motor controllers/inverters designed primarily for ancillary control of pumps and fans on hybrid and electric buses, agricultural implements, tractors and other high voltage vehicles. There are 5 models in the range, which cover both liquid cooled and air cooled designs, along with a double air cooled controller.
Features
- 200V to 800VDC battery voltage
- Up to 53A peak current (HVLP-20)
- Up to 33A continuous current (HVLP-20)
- Advanced flux vector control
- 12V or 24V nominal supply
- High Voltage Interlock (HVIL)
- CAN J1939 compatible
- AC Permanent Magnet synchronous motor
- AC Induction motor
- Resolver, Sin/Cos, AB or absolute UVW encoder (hall effect) sensing systems
- Robust all alloy housing IP6K9K - IP67
Datasheet
Click here for Datasheet
IXXAT-KIT
The IXXAT kit is required for integrating Sevcon inverters. This kit includes an IXXAT adapter harness and DVT (Design Verification Test) software for communicating with Sevcon inverters. The IXXAT is a DB9 CAN adapter to USB for connection between the inverter and a PC. The DVT software provides a simple yet powerful means of accessing the CANopen bus for diagnostics and parameter adjustment.
Features
- A vehicle interface for viewing real-time motor information such as current, voltage, and temperature.
- A user interface for viewing and changing settings in the inverter, creating process data objects (TPDOs/RPDOs), managing I/O connections, and setting limits for the motor and battery.
- An information window for download progress and inverter faults.
A manual is available with NDA and direct contact with sales. Please Contact Sales