Harnesses

From NewEagleWiki
Jump to navigation Jump to search

MotoHawk Harnesses

Motohawk Control Solutions/Harnesses

Boot Cable Harnesses, Connectors, and Keys

Errors in configuration, logic or other electronic control module programming made during application development efforts can cause a temporary loss of CAN communications with the module under development. MotoHawk provides the must-have boot keys and cables to remedy this occurrence. Each designed to match the boot connection requirements of the particular ECM model type. Boot keys provide a signal to the STOP pin of the ECM. Boot cables tie certain analog inputs together to a specific signal level.

Webstore:
Webstore: Boot Cable Harnesses, Connector, and Keys

Development Harness

Development Harnesses are designed specifically for their respective electronic control module. They provide labeled wiring to all ECM pins: I/O, power, ground, etc. and have 10-pin connectors for module programming with CAN. Development Harnesses also provide standard power, ground, and keyswitch connections. This product is rated for use in harsh industrial and automotive environments and includes a main power relay and a fused power connection.

Webstore:
Webstore: Development Harnesses

Pigtail Harness

Pigtail Harnesses provide dedicated labeled wires to all pins (I/O, power, ground, etc.) of the respective electronic control module model. They are indispensable for wiring in prototype development and testing efforts and are rated for use in harsh industrial and automotive environments. Pigtail Harnesses are available in a variety of pre-cut harness wire lengths.

Webstore:
Webstore: Pigtail Harness

Programming Harness

Programming Harnesses are specifically designed for programming the respective Woodward electronic control module model via CAN connection and 10-pin connector. Use this harness with the appropriate CAN-to-PC cable (Kvaser, etc).

KAntrak / CANvu Harnesses

KAntrak/CANvu Displays

KAntrak Configurable Input Harness

KAntrak Configurable Input Module Harnesses - Development Cable Set

KAntrak Display Power Harness

This pre-assembled power harness for KAntrak consists of a mating connector to plug into the display and 1.5m long flying leads for connection to the vehicle or equipment.

Alternatively, a connector kit is available for customers wishing to manufacture their own wiring harnesses.

Webstore

Webstore: KAntrak/CANvu Accessories

Kvaser Harnesses

SmartCraft Harnesses

SmartCraft (Yellow) Cable Selection Guide

Custom Wiring Design and Manufacturing

New Eagle builds both engineering - prototype and production wiring harnesses.


Documentation

Harness Drawings and Documents

Connectors and Wiring

Connectors and Wiring

Wiring Harnesses

Webstore

Webstore: Wiring Harnesses