CANvu

CANvu 350

The CANvu CAN bus display range now includes a new fully sunlight viewable 3.8" color display. The CANvu is the next generation of compact, highly flexible, rugged CAN bus displays from Veethree.

CANvu Hardware

The CAN line on the CANvu is not galvanic isolated.

There is 16 MB of flash and 64 MB of SDRAM memory to run programs on the CANvu.

There is no choke inductor on the CANvu's CAN bus.

CANvu VEM 400N

CANvu 400N is a next generation CAN bus display. It is highly sealed and provides tough, flexible instruments ready to face the challenges of harsh environments. CANvu 400N has a brightness rating of 400 NIT for indirect sunlight. The Veethree Engine Monitor (VEM) software displays transmitted J1939 engine and transmission data and active alarms where supported. The VEM application software runs on the CANvu robust industrial graphical displays. The VEM offers user selectable icon based display layouts and includes a comprehensive multi language text based fault warning and acknowledgement system.

Features include:

Color Display - Indirect Sunlight Readable
J1929/Tier 4, 3.8 inch display for indirect sunlight
QVGA graphical high resolution 320 x 240 color display
Max brightness of 400 NIT on the unit
Fully sealed to IP67 using molded in 12 way Deutsch connector
4 serial comm ports: CAN bus, RS232, USB and RS485
Screens can be “locked” to prevent changes
Optional Service Interval Timer Alarm
Data is available in several formats and measurement units

How to Install CANvu 350

CANvu 350 Tools Install Guide

Webstore

Webstore: CANvu VEM 400N

CANvu VEM 800N

CANvu 800N is the next generation of compact, highly flexible, rugged CAN bus displays. CANvu 800N has a brightness rating of 800 NIT for full sunlight. The Veethree Engine Monitor (VEM) software displays transmitted J1939 engine and transmission data and active alarms (from DM1) where supported. The VEM application software runs on the CANvu robust industrial graphical displays. The VEM offers user selectable icon based display layouts as well as including a comprehensive multi language text based fault warning and acknowledgement system.

Features include:

Color Display - Fully Sunlight Readable
J1939/Tier 4, 3.5 inch display for full sunlight
QVGA graphical high resolution 320 x 240 color display
Max brightness of 800 NIT on the unit
Fully sealed to IP67 using molded in 12 way Deutsch connector
4 serial Comm ports: CAN bus, RS232, USB and RS485
Screens can be “locked” to prevent changes
Optional Service Interval Timer Alarm
Data is available in several formats and measurement units

CANvu 350 Install Guide and Loading Firmware

CANvu 350 Tools Install Guide

Webstore

Webstore: CANvu VEM 800N

CANvu J1939 Engine Monitor

The Veethree Engine Monitor (VEM) is a J1939-compatible engine / transmission display.

The VEM is a user-configurable application software that creates graphical instrument clusters to display parameters and alarms. Providing users with a timesaving solution for introducing equipment incorporating higher degrees of electronic display and control.

There is an omission in the datasheet in section 5.4 about choosing which data to display. The instructions to do so are listed below.

The left little square shows what can be displayed on the quad screen layout.
The right little square shows what can be displayed on the single gauge screen.
If the little square is red, then that item is not available.
If it is black then that item will not be shown, but can be edited and changed to white which means it will be shown.
The text if it is red means, that is the item you are editing with the button keys on the bottom.
CAN signals must be present to be shown or edited.

CANvu J1939 VEM Operating Instructions