Raptor:PWM Output

Return to the main Raptor page

Return to Input & Output page

Raptor PWM Output

Description

This block sets the state of the selected PWM output. PWM (pulse width modulation) is typically used similar to an analog output.

Inputs

Input	Type	Description
Duty Cycle	uint16	The duty cycle of the output in 0.01%. For example raw value 500 = 5%.
Frequency	uint32	The frequency of the output in 0.01Hz. For example raw value 40000 = 400Hz.

Outputs

Output	Type	Description

Parameters

Parameter	Type	Description
Hardware Resource		Specifies which input from the hardware is being read.
Driver Type		Specifies the type of driver to be used on the selected output.

Supported Versions

• Raptor 2013a_0.0.1 and newer