| Platform |
Pictures |
Core |
Memory |
Inputs |
Outputs |
COMM |
Environment |
software
|
| Micro. |
Clock Freq. |
Int. Flash |
Ext. Flash |
EEPROM |
Int. SRAM |
Ext. SRAM |
Sup. Volt. |
Emer. stop inputs |
Switch inputs |
Freq. inputs |
Crank position input type |
Analog Inputs (10-bit) |
Knock Inputs |
O2 Sensor Inputs |
High current drivers (10A) |
Medium current drivers (3A) |
Current controlled drivers |
Low current drivers (500ma) |
Relay drivers (<250ma) |
Main Power Relay low-side driver |
Inj. Drivers |
Logic outputs or spark triggers |
Direct ignition coil drivers |
Low Current H Bridge Driver |
High Current H Bridge Driver |
Sensor Excitation |
CAN 2.0B |
USB 1.1 |
Serial |
Shutdown |
Operating Temp. Range |
Const. |
Connector |
Motohawk or SIMULINK |
C API
|
| ECM S12-24 |
 |
Freescale HCSS12 |
24 MHz |
128K |
|
2k Internal |
2k |
|
8-16V |
|
|
|
VR/Hall mode SW selectable |
7-12 |
|
1 single ended ego |
|
1-4 low side |
|
1 low side |
|
|
1 |
0 or 3 (5V) triggers |
|
0 or 1 (5A) w/current sense |
|
1 (5V) (250ma max) |
1 or 2 |
|
|
not SW controlled |
-40C to 105C |
Plas. Hous. |
24-Pin Delphi |
yes |
|
| ECM 555-48 |
 |
Freescale MPC555 |
40 MHz |
448K |
|
4K or 8K (serial) (Dev't version: 128K) |
26K |
|
8-16V |
|
4 Hall type (PU) |
VR or Hall (model dependent) |
|
12 |
1 or 2 (DSP) |
|
1 or 2 low side (PWM) |
1 low side PWM, 1 low-side discrete |
|
1 low side PWM |
|
1 |
4 (high imp.) |
4 (5V), 1 (12V) |
|
|
|
1 (5V) (350ma max) |
1 |
|
RS-485 |
SW controlled (via MPRD Relay) |
-40C to 85C |
Stamp. Alum. |
48-pin Tyco |
yes |
|
| ECM 563-48 |
|
Freescale MPC563 |
56MHz |
512K |
|
16K (serial) (Dev't version: 128K) |
32K |
|
8-16V |
|
|
1 VR/Hall (SW selectable) |
VR/Hall mode SW selectable |
Up to 19 |
1 (DSP, optional) |
3 single-wire EGO (optional) |
|
up to 5 low side (up to 2 PWM) |
|
1 low side |
|
1 |
4 (high imp.) |
8 (5V), 1 (12V) |
|
1 or 2 (5A) w/current sense |
|
1 or 2 (5V) (350ma max) |
1 or 2 |
|
|
SW controlled |
-40C to 105C |
Stamp. Alum. |
48-pin Tyco |
Yes |
|
| ECM S12X-70 |
 |
Freescale HCS12XE |
50MHz |
256K (1M on Dev't ver.) |
|
4K internal + 8K (serial) |
16K (64K on Dev't version) |
|
8-16V |
1 |
4 switch to GND |
3 Hall type (PU) |
Both VR and Hall input pins available |
18 |
|
2 single-ended EGO |
1 low side |
2 low side PWM |
|
1 low-side PWM |
5 |
1 |
4 (high imp.) |
1 (12V) |
2 or 3 |
|
|
1 or 2 (5V) (100ma max) |
1 or 2 |
|
RS-485 |
SW controlled |
-40C to 85C |
Stamp. Alum. |
70-pin Tyco |
Yes |
|
| ECM 555-80 |
 |
Freescale MPC555 |
40 MHz |
448K |
2M (Dev't ver. only) |
8K (serial) (Dev't ver. 128K) |
26K |
|
8-16V |
1 |
1 switch to GND |
3 Hall type (PU) |
Both VR and Hall input pins available |
Up to 19 |
2 (DSP) |
2 differential EGO (optional) |
|
Up to 6 low-side PWM |
|
2 low-side |
|
1 |
12 (3A/ 1A Peak/ hold) |
8 (5V) triggers |
|
1 (5A, optional) |
1 (12A discrete, optional) |
2 (5V) (350ma max) (3A/1A Peak/ \hold) |
1 or 2 |
|
RS-485 |
SW controlled (via MPRD Relay) |
-40C to 105C |
Cast Alum. w/ E-Coat |
80-pin Tyco |
Yes |
|
| ECM 5554-112 |
 |
Freescale MPC5554 |
80MHz |
2M |
|
32k (serial) |
64K |
512k (Dev't ver. only) |
8-16V |
1 |
|
Up to 4 Hall type (PU) |
Both VR and Hall input pins available |
33 |
2 (DSP) |
4 differential EGO |
|
4 low side (w/HEGO diagnostics) |
2 (1A) |
5 low-side |
2 low-side |
1 |
8 (high imp.) |
8 (5V) triggers, 1 (12V) |
|
1 (5A, w/current sense) |
1 (12A discrete) |
2 (5V) (50ma & 100ma) |
3 |
|
RS-485 |
SW controlled |
-40C to 105C |
Cast Alum. w/ E-Coat |
112-pin Molex |
yes |
|
| ECM-OH-112 |
 |
FS MPC5642A, HCS12G128 |
120 Mhz |
2M (4M on Dev't ver.) |
|
32k (serial) |
128K (192k on Dev't version) |
8k |
8-32 V |
|
|
Up to 6 Hall type (PU) |
Both VR and Hall input pins available |
31 |
2(DSP) |
2 EGO & 2 UEGO Or 4 EGO |
|
11 low side (1 w/ current sense) |
|
8 low side + 1 TACH |
|
1 |
8 high impe. or 6 Peak / Hold (7A/2A) |
8 (opt.) |
8 (opt.) |
1 (5A w/ current sense) 1 (2.5A with current sense) |
1 (12A discrete) |
2 (5V) (350ma & 100ma) 1 (12 V,100 ma) |
3 |
|
RS-485 |
SW controlled |
-40C to 105C |
Cast Alum. |
112-pin Molex |
yes |
|
| ECM 565-128 |
 |
Freescale MPC565 |
56 MHz |
1M |
|
8K (serial), optional 128K (parallel) |
36K |
512K (opt.) |
9-32V |
|
|
Up to 8 Hall type (PU) & 4 VR/Hall (SW sel.) |
VR/Hall mode SW selectable |
Up to 34 |
2 or 4 (DSP) |
2 UEGO (Bosch widerange), 2 differential EGO (optional) & 2 single-wire EGO |
|
10 low side PWM (2 w/current sense) |
|
1 |
|
1 |
12 - 3A/ 1A Peak / hold (6 are 7A/2.5A SW sel.) |
12 or 16 (5V) triggers, 1 (12V) |
|
|
3 (15A w/current sense) |
2 (5V) (350ma max) |
2 |
|
RS-485, ISO-9141 |
SW controlled |
-40C to 105C |
Cast Alum. |
80 & 48-pin Tyco |
yes |
|
