Raptor:Modbus Slave Error
Return to the main Raptor page
Description
This block acts as a Modbus master on a serial bus.
Inputs
| Input | Type | Description |
|---|---|---|
| Node | uint16 | The address of the slave device to request from. |
| Register Address | uint16 | The register address to be read. |
| Read length | uint16 | The number of registers to be read. |
Outputs
| Output | Type | Description |
|---|---|---|
| RegisterRead() | trigger | The trigger port will fire when a valid response is received. |
| Node Address | uint16 | The address of the responding slave. |
| Data Address | uint16 | The register address for the start of the read. |
| data | uint16 | The data returned from the slave. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| Serial Bus Name | String | The name of the serial bus that should be utilized. |
| Data Requests | String | A list of data request that should be requested. See: modbus_requests_example.m for the format. |
| Use Inputs | checkbox | If checked the block will use input ports for the data requests. |