Raptor-Dev-Modbus-Library

New Eagle > Products Wiki > Raptor Platform > Raptor-Dev > Raptor-Dev Modbus Library

This library exposes a block interface for the Modbus protocol. This protocol is useful for many industrial application. The library handles many of the details under the hood, so the end-user can configure which modbus registers to read (master) or to write (slave). The library abstracts the details of the protocol into a simple block interface consisting of just a handful of blocks and configuration scripts.

Modbus specification may be downloaded from (modbus.org): PI_MBUS_300

Raptor:Modbus Master currently supports the following commonly used service(s):

• 03 Read Holding Registers

Raptor:Modbus Slave currently supports the following commonly used service(s):

• 03 Read Holding Registers
• 06 Preset Single Register

This library may be used on Raptor targets which expose a serial (RS232/RS485) interface such as the DISP-IMX286 (VEECAN) targets.

Blocks

Block	Description	Appearance
Modbus Master	This block acts as a Modbus master on a serial bus.	Application Monitor Measure block
Modbus Slave	This block acts as a Modbus slave on a serial bus.	Application Monitor Measure block
Modbus Slave Error	This block will send a MODBUS Error Response.	Application Monitor Measure block
Modbus Slave Response	This block is used to package and send a response to a request.	Application Monitor Measure block