Cascadia Motion (Rinehart Motion)
Product Summary
The PM100DX is an AC Traction Controller designed for on- and off-road Electric (EV) or Hybrid Electric (HEV) applications. The Traction drive is fabricated using a patented high heat flux thermal design approach that dramatically reduces the size and weight of the finished drive, and improves its life in the automotive environment. With extensive experience in automotive and military vehicle traction and power electronics applications, RMS has achieved a major breakthrough in integrating Traction Control into a vehicle.
Electric Motors Supported by the RMS Traction Inverter
- Siemens/Ford Ranger Induction Motor
- Remy HVH250 PM Motor
- Siemens 1PV5135-4WS28
- Parker PM Motor
- Remy HVH250HT Motor (In Development)
- EVO AF-140-12 PM Motor
- MES Induction motor
- UQM-75 Motor
- Numerous Customer, Proprietary Installations
MotoHawk CAN Library for RMS PM100
MotoHawk CAN Library for RMS PM100
Supports version 1.0, Sept 30, 2009 CAN ICD. Request more information on the MotoHawk library at sales@neweagle.net. This library and the RMS PM family of inverters integrates well with the New Eagle EV Supervisory Control system, and furthermore makes a nice EV Powertrain combination with one of the supported motors.
Firmware Release Notes
Current version is 12E-1, 9 November, 2010 Please contact New Eagle for a download link:
Features:
a. Updated current regulators for improved performance
b. Updated flux weakening regulator
Current version is 12D, 27 September, 2010 Please contact New Eagle for a download link:
Features:
- Changed the SW Over-current limit to 550 Amps for HW versions 0, 2, 2340, and 2342. - Added a current proportional gain schedule - For SCI broadcast, used non-filtered values instead of filtered values for more accurate diagnostics. - Added Id and Iq commands to CAN broadcast message 0x0AD. - For motor type 1, updated following parameters:
o Leakage is set to 1.0 instead of 0.57735
o Kp Current is set to 1.0 instead of 2.0
o Mod Limit is set to 1.10 instead of 1.20
Bug fixes:
- Fixed the bug that was causing the speed resolution to be 2 rpm minimum. - Corrected resolution on ‘Modulation’ parameter for CAN broadcast message.
Last Release 12, June 23, 2010
Please contact New Eagle for a download link:
Features & Bug-Fixes: Please refer to the document "SWRP 12 Firmware Release Notes" through the above link.
Minor Release 12A,
Features: This is a minor release with the following updates: (a) Added Delta Resolver Filtered to the broadcast message 0x0A5. (b) Added a new broadcast message 0x0AD to send Modulation Index and Flux Weakening Output information. (c) Added Inverter Enable State and Direction Command to byte 6 and 7 respectively, to the broadcast message 0x0AA.
Release Type: Minor Release 12B, 12 July, 2010
RMS Traction Inverters in the News
EV Conversions
EV Powertrain for Light to Medium Duty Trucks
Electric Race Motorcycle
Green Car Congress
Debut of the RMS PM Family of Drives
http://www.greencarcongress.com/2006/10/rinehart_motion.html
Electric Drive for Siemens Ballard AC Induction Drive
Contact sales @(at) neweagle.net - http://www.diyelectriccar.com/forums/showthread.php/ford-ev-motors-siemens-ballard-26120.html