Raptor Telematics Downloads

From NewEagleWiki
Jump to navigation Jump to search

Downloads

Overview

Quickstart

User Manual

Installation Guide

C4 Max Datasheet

Raptor Telematics Part Numbers

Gold

ASM-TCM-G01-USA & ASM-TCM-G01-GLOBAL

Platinum

ASM-TCM-P01-USA & ASM-TCM-P01-GLOBAL

Troubleshooting

Please follow the steps below to troubleshoot the connection.

1. Verify that the IMEI on the back of the unit matches the portal configuration:

  • The IMEI can be found on the back of the unit:


2. Make sure that the unit’s antenna is properly connected and mounted in an area where it has a view of the sky.
3. Assure that the unit is in an area where there is cellular coverage.

  • The coverage map(s) can be found here.

4. Power up the unit and check the LEDs.

  • We’d like to see that the cellular (GPRS) connects and the GPS gets a fix. This would be the green LED flashing for 2 seconds ON and 2 seconds OFF. The green LED sometimes looks more yellow than green.

5.Monitor the CAN bus connection. If working correctly, the telematics unit should transmit the following message:

0x19F0FF4A