Introduction
- Pigtail Harness:
A pigtail harness consists of the connectors for the ECM and a wire for each pin on the ECM.
- Development Harness:
Development harnesses are pigtail harnesses with power, ground, key-switch and communication wired. The harness is also covered in loom.
- Boot Harness:
A boot harness is used when the module has been flashed with bad software and will not respond to attempts to program it. The boot harness will cause the module to go into boot mode and a new programing file will be flashed onto the module.
- Programming Harness:
A programming harness contains only the necessary connections to communicate with and flash the module. This includes Battery, Ground, Wake_Input1 (KeySW), and CAN1+/-.
- Simulator Harness:
Simulator harnesses are used in conjunction with a Desk Top Simulator.
24-Pin MotoHawk Module
24-Pin Module Connectors
Please note that cavity plugs are not used on the connector kits. Overview of 24-Pin Connector
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Connector Kit includes:
(35) Terminals 20AWG
(1) Connector
(1) Black Retainer
(1) CPA
(1) Cable Seal
(1) Strain Relief
|
ASM-CON-004
|
Purchase
|
|
Connector Kit includes:
(35) Terminals 20AWG
(1) Connector
(1) Clear Retainer
(1) CPA
(1) Cable Seal
(1) Strain Relief
|
ASM-CON-006
|
Purchase
|
|
Terminals 20AWG
|
CON-TMFL-034-00
|
|
|
Female Connector
|
CON-FEML-035-00
|
|
|
Black Retainer
|
CON-LOCK-013-00
|
|
|
Clear Retainer
|
CON-LOCK-016-00
|
|
|
Connector Position Assurance (CPA)
|
CON-LOCK-022-00
|
|
|
Cable Seal
|
CON-SEAL-011-00
|
|
|
Strain Relief
|
CON-STRN-003-00
|
|
24-Pin Module Pigtail Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Pigtail Harness for GCM S12-24
|
HARN-MCHI-001-DO
|
Purchase
|
|
Pigtail Harness for S12-24
|
HARN-SECM-004-DO
|
Purchase
|
24-Pin Module Programming and Boot Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Quick Programming Cable for ECM-S12-24 only
|
HARN-SECM-012-00
|
Purchase
|
|
Boot Harness for ECM-S12-24 Module
|
HARN-SECM-005-D1
|
Purchase
|
48-Pin MotoHawk Module
48-Pin Module Connectors
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Connector Kit includes:
(55) Terminals 18-20AWG
(1) Connector (A Key)
(1) Connector (B Key)
(48) Plugs
(2) Covers
|
ASM-CON-002-00
|
Purchase
|
|
Terminals 18-20AWG
|
CON-TMFL-002-00
|
|
|
24-Channel Connector (A Key)
|
CON-FEML-001A-00
|
|
|
|
24-Channel Connector (B Key)
|
CON-FEML-001B-00
|
|
|
Connector Plug
|
CON-PLUG-002-00
|
|
|
Connector Cover
|
CON-COVR-001A-01
|
|
48-Pin Module Pigtail Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Pigtail Harness for ECM/GCM/HCM 48-Pin
|
HARN-ECM-004-D0
|
Please contact sales
|
48-Pin Module Programming and Boot Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Quick Programming Cable for ECM 555-48 Module
|
HARN-ECM-012
|
Please contact sales
|
|
Boot and Quick Programming Cable for ECM 563-48 Module
|
HARN-ECM-013
|
Purchase
|
|
Boot Cable for GCM 563-48 Module
|
HARN-ECM-022
|
Purchase
|
|
Quick Programming Cable for GCM/HCM 48 (a.k.a. Fire 48)
|
HARN-PROG-009
|
Purchase
|
48-Pin Module Development Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Development Harness GCM/HCM 563-48 Module
|
HARN-ECM-014
|
Please contact sales
|
|
Development Harness for ECM 563-48 Module
|
HARN-ECM-027
|
Please contact sales
|
|
Development Harness for 555-48 Module
|
HARN-ECM-007-00
|
Please contact sales
|
48-Pin Simulator Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Simulator Harness for 48-Pin ECM
Simulator Harness for 48-Pin GCM/HCM
|
HARN-INTR-024B
HARN-INTR-024C
|
Purchase
Purchase
|
70-Pin MotoHawk Module
70-Pin Module Connectors
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Connector Kit includes:
(80) 0.63 mm Terminals 18-20AWG
(8) 1.5 mm Terminals 18-20AWG
(1) Female Connector
(15) 0.63 mm Plugs
(5) 1.5 mm Plugs
(1) Cover
|
ASM-CON-046
|
Purchase
|
|
0.63mm Terminals 18-20AWG
|
CON-TMFL-054-00
|
|
|
1.5mm Terminals 18-20AWG
|
CON-TMFL-055-00
|
|
|
70-Channel Connector
|
CON-FEML-056-00
|
|
|
0.63mm Plugs
|
CON-PLUG - .63 MM 112-Pin
|
|
|
1.5mm Plugs
|
CON-PLUG- 1.5 MM 12-Pin
|
|
|
Connector Cover
|
CON-STRN-007
|
|
70-Pin Module Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Pigtail Harness
(S12X and SECM70)
|
HARN-GCM70-001
|
Purchase
|
|
Programming Harness
(S12X)
|
HARN-ECM-029
|
Purchase
|
|
Development Harness
(SECM7O)
|
HARN-SECM-DEV-70
|
Purchase
|
|
|
Development Harness
(S12X)
|
HARN-ECM-028
|
Purchase
|
80-Pin MotoHawk Module
80-Pin Module Connectors
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Connector Kit includes:
(64) 0.63 mm Tin Terminals 22-24AWG
(16) 1.5 mm Tin Terminals 18-20AWG
(1) 32-Pin Matte Connector (A key)
(1) 48-Pin Matte Connector (B key)
(1) 32-Pin Connector Covers
(1) 48-Pin Connector Cover
(10) 0.63 mm Plugs
(5) 1.5 mm Plugs
|
CON-KIT-RCM80
|
Purchase
|
|
Connector Kit includes:
(100) Terminals 18-20AWG
(1) 24-Position Connector (A Key)
(1) 24-Position Connector (B Key)
(1) 32-Position Connector
(100) Cavity Plugs
(2) Covers for 24-Position Connector
(1) Cover for 32-Position Connector
|
ASM-CON-001-00
|
Purchase
|
|
|
Terminals 18-20AWG
|
CON-TMFL-002-00
|
|
|
|
24-Channel Connector (A Key)
|
CON-FEML-001A-00
|
|
|
|
24-Channel Connector (B Key)
|
CON-FEML-001B-00
|
|
|
32-Channel Connector
|
CON-FEML-002A-00
|
|
|
|
Connector Plug
|
CON-PLUG-002-00
|
|
|
|
Cover for 24-Position Connector
|
CON-COVR-001A-01
|
|
|
Cover for 32-Position Connector
|
CON-COVR-001B-01
|
|
80-Pin Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Programming Harness
|
HARN-PCM-012
|
Please contact sales
|
|
Development Harness
|
HARN-PCM-008
|
Please contact sales
|
|
Simulator Harness
|
HARN-INTR-025A
|
Purchase
|
112-Pin MotoHawk Module
112-Pin Module Connectors
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Connector Kit includes:
(100) 0.63 mm Tin Terminals 22-24AWG
(34) 1.5 mm Tin Terminals 18-20AWG
(1) 32-Pin Matte Connector (A key)
(1) 48-Pin Matte Connector (B key)
(1) 32-Pin Matte Connector (C key)
(2) 32-Pin Connector Covers
(1) 48-Pin Connector Cover
(10) 0.63 mm Plugs
(5) 1.5 mm Plugs
|
ASM-CON-042-MATTE
|
Purchase
|
|
|
Connector Kit includes:
(100) 0.63 mm Gold Terminals 22-24AWG
(34) 1.5 mm Gold Terminals 18-20AWG
(1) 32-Pin Matte Connector (A key)
(1) 48-Pin Matte Connector (B key)
(1) 32-Pin Matte Connector (C key)
(2) 32-Pin Connector Covers
(1) 48-Pin Connector Cover
(10) 0.63 mm Plugs
(5) 1.5 mm Plugs
|
ASM-CON-042-OH
|
Purchase
|
|
0.63 mm Tin Terminals 22-24AWG
|
CON-TMFL-050-00
|
|
|
1.5 mm Tin Terminals 18-20AWG
|
CON-TMFL-049-00
|
|
|
32-Pin Matte Connector (A key)
|
CON-FEML-051-00
|
|
|
48-Pin Matte Connector (B key)
|
CON-FEML-052-00
|
|
|
32-Pin Matte Connector (C key)
|
CON-FEML-054-00
|
|
|
|
0.63 mm Plugs
|
CON-PLUG - .63MM 112-Pin
|
|
|
|
1.5 mm Plugs
|
CON-PLUG- 1.5MM 12-Pin
|
|
|
Cover for 32-Pin Connector
|
CON-COVR-008
|
|
|
Cover for 48-Pin Connector
|
CON-COVR-009
|
|
112-Pin Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Pigtail Harness for ECM/GCM 112
|
HARN-P112-001
|
Purchase
|
|
Pigtail Harness for ECM-OH
|
HARN-P112-001-OH
|
Purchase
|
|
Programming Harness for ECM/GCM 112
|
HARN-P112-003
|
Purchase
|
|
|
Programming Harness for ECM-OH
|
HARN-P112-003-OH
|
Purchase
|
|
Development Harness for ECM/GCM 112
|
HARN-P112-002
|
Purchase
|
|
Development Harness for ECM-OH
|
HARN-P122-002-OH
|
Please contact sales
|
|
|
Simulator Harness
|
HARN-INTR-026A
|
Purchase
|
128-Pin MotoHawk Module
128-Pin Module Connectors
| Picture
|
Product
|
Part Number
|
Webstore
|
|
Connector Kit includes:
(200) Terminals 18-20AWG
(2) 24-Position Connector (A Key)
(2) 24-Position Connector (B Key)
(1) 32-Position Connector
(100) Plugs
(4) Covers for 24-Position Connector
(1) Cover for 32-Position Connector
|
ASM-CON-003-00
|
Purchase
|
|
|
Terminals 18-20AWG
|
CON-TMFL-002-00
|
|
|
|
24-Position Connector (A Key)
|
CON-FEML-001A-00
|
|
|
|
24-Position Connector (B Key)
|
CON-FEML-001B-00
|
|
|
|
32-Position Connector
|
CON-FEML-002A-00
|
|
|
|
Connector Plug
|
CON-PLUG-002-00
|
|
|
|
Cover for 24-Position Connector
|
CON-COVR-001A-01
|
|
|
|
Cover for 32-Position Connector
|
CON-COVR-001B-01
|
|
128-Pin Harnesses
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Simulator Harness
|
HARN-INTR-027A
|
Please contact sales
|
|
VeeCAN 128 DISPLAY POWER AND PROGRAMMING HARNESS
|
HARN-CAN-DP-128
|
Purchase
|
Mounting Hardware
| Picture
|
Product
|
Part Number
|
Webstore
|
|
1 Mounting Hardware Kit for MotoHawk Module
(3 bushings, 3 washers, 3 rubber grommets)
|
ASM-MOUN-002-00
|
Purchase
|
30 Mounting Hardware Kits for MotoHawk Modules
(90 bushings, 90 washers, 90 rubber grommets)
|
ASM-MOUN-001-01
|
Purchase
|
|
1 Aluminum Bushing Kit for a MotoHawk Module
(3 bushings)
|
BUSH-ALUM-001-00
|
|
| 2212 Aluminum Bushings for MotoHawk Modules
|
ASM-MOUN-008-00
|
Purchase
|
|
1 Rubber Grommet Kit for a MotoHawk Module
(3 grommets)
|
GRMT-RBBR-001-00
|
Purchase
|
| 4000 Rubber Grommets for MotoHawk Module
|
ASM-MOUN-007-00
|
Purchase
|
|
1 Washer Kit for a MotoHawk Module
(3 washers)
|
WASH-FLAT-002-00
|
|
| 5000 Washers for MotoHawk Modules
|
ASM-MOUN-006-00
|
Purchase
|
Boot Cable Harnesses, Connectors and Keys
BOOT KEY FOR ECM555-48/80, GCM563-48, HCM563-48, ECM565-128 AND ECM5554-112
Connector Crimp and Removal Tools
HAND CRIMP TOOL FOR SMARTCRAFT AND 24-PIN MODULES
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Manufacturer-suggested crimping tool for Motohawk ECM24
|
TOOL-CON-001-00
|
Purchase
|
HAND CRIMP TOOL FOR 24-PIN MODULES
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for 24-Pin Terminals
|
TOOL-CON-002-00
|
Purchase
|
REMOVAL TOOL - SMARTCRAFT TPA
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
TPA Removal Tool
|
TOOL-CON-004-00
|
Purchase
|
REMOVAL TOOL - SMARTCRAFT TERMINALS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Terminal Removal Tool
|
TOOL-CON-005-00
|
Purchase
|
CRIMP TOOL FOR 48/80/128-PIN ECM PINS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for 48/80/128-Pin Terminals
|
TOOL-CON-008-00
|
Purchase
|
EXTRACTION TOOL FOR 48/80/128 ECM PINS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Terminal Removal Tool for 48/80/128-Pin ECUs
|
TOOL-CON-009-00
|
Purchase
|
CRIMPER FOR RELAY TERMINALS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for Delphi 630 Series Terminals
|
TOOL-CON-010-00
|
Please contact sales
|
CRIMPER - SMARTCRAFT TERMINALS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for SmartCraft Terminals
|
TOOL-CON-011-00
|
Purchase
|
CRIMPER - DEUTSCH HDT48-00
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Deutsch HDT48-00 Terminal Crimper
|
TOOL-CON-015-00
|
Purchase
|
CRIMPER - MOLEX .63 MM FOR 112-PIN CONTROLLER CONNECTORS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for Matte .63 mm Molex Terminals
|
TOOL-CON-016-MATTE (TOOL-GCM48-01)
|
Purchase
|
CRIMPER 1.5 MM FOR 112-PIN ECM CONNECTORS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for 1.5 mm Molex Matte Terminals
|
TOOL-CON-017-MATTE (TOOL-GCM48-02)
|
Purchase
|
TERMINAL REMOVAL TOOL - MOLEX 0.63 MM FOR 112-PIN CONTROLLER CONNECTORS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Removal Tool for .63 mm Molex Matte Terminals
|
TOOL-CON-018
|
Purchase
|
TERMINAL REMOVAL TOOL - MOLEX 1.5 MM FOR 112-PIN CONTROLLER
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Removal Tool for 1.5 mm Molex Terminals
|
TOOL-CON-019
|
Purchase
|
CRIMPER - SMALL TYCO TERMINAL ECM 70
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for small Tyco Terminals
|
TOOL-GCM70-01
|
Purchase
|
CRIMPER - MOLEX LARGE TERMINAL ECM70 18-20AWG
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool for Large Tyco Terminals
|
TOOL-GCM70-02
|
Purchase
|
CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
CRIMPER, MOLEX (LARGE) ECM70 TERMINAL, 14-16AWG
|
TOOL-GCM70-03
|
Purchase
|
TERMINAL REMOVAL FOR ECM 70
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Terminal Removal Tool for ECM 70s
|
TOOL-GCM70-04
|
Purchase
|
REMOVAL TOOL - CM 0711 and CM 3626 MODULES
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Terminal Removal Tool for
CM 0711 and CM 3626 Modules
|
TOOL-CON-0411-336-1605
|
Purchase
|
REMOVAL TOOL 48/80/128
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Terminal Removal Tool for
48/80/128-Pin
|
TOOL-CON-0411-240-2005
|
Purchase
|
REMOVAL TOOL - CM 2115 MODULES
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Removal Tool - CM 2115 Modules
|
TOOL-CON-DT-RT1
|
Please contact sales
|
CRIMPER TOOL - VEECAN DISPLAYS
| Picture
|
Product
|
Part Number
|
Webstore
|
|
|
Crimp Tool - VeeCAN Displays
(1062-16-0622 Terminals)
|
TOOL-CON-DTT-16-01
|
Purchase
|
|
.jpg)
