NIRA
Controllers
HCM-5534-50-1203 (CM2115)
The New Eagle HCM-5534-050-1203 (CM2115), built by Parker, is a High Side Driver Hydraulic Controller. This unique controller is built for off-road and on-road applications. It has many high side drivers and I/O for mobile hydraulic and other machine control.
Specifications
- 4 independent analog signal outputs (voltage or current)
- User selectable output range from +/-10V or +/-20 mA, including: 0-5V; 0-10V; +/-5V; +/-10V; 0-20mA; 4-20 mA; and +/-20mA.
- 12V/24V/48VDC input power (nominal) with rugged surge protection
- Galvanic isolation between power supply and analog signal outputs
- Rugged IP67 packaging and connectors
112 Pin 5554 Engine Control Module
This is a high-end control module family capable of operating in harsh automotive, marine, and off-highway applications. The family and its connector system are environmentally sealed and suitable for engine mounting in many applications. Each controller is available in 'F' (flash) or 'C' (calibratible) versions. Flash modules are typically used for production purposes, while calibratible modules are typically for prototyping/development only and can be calibrated in real time using MotoTune.
These modules are based on Freescale MPC5553 or 5554 processors running at 80 MHz. The 112-pin modules offer a full complement of memory storage, 3 CAN channels, and many digital and analog I/O including frequency, crank position, and DSP knock detection, and EGO oxygen sensor inputs. Typical applications include EV / HEV Supervisory control and full OBD2 8 cylinder sequential engines.
ECM-5554-112 Drawing
More Information
More Information: ECM-5554-112
Modules Available
| Part Number | Picture | Visit our Webstore | Datasheet
|
|---|---|---|---|
|
ECM-5554-112-0902 ECM-5554-112-0904 |
|
ECM-5554-112-0902-F-M | ECM-5554-112-0902 datasheet |
Known Data Sheet Errors
In the ECM-5554-112 Family of Controllers Datasheet, the block Diagram of ECM-5554-112-0902(page 4) has C-H4 and C-G4 switched around:
C-G4 goes with HBRIDGE1A and C-H4 goes with HBRIDGE1B.
Datasheet
Webstore