This block causes the fault manager to be generated. The fault manager must exist only once in the model to enable the fault blocks to be used. There are different types of fault manager which contain different features and options. Currently supported types are Standard and OBD Fault Manager.
Inputs
Input
Type
Description
Outputs
Output
Type
Description
Parameters
Parameter
Type
Description
Fault Map Tool
Launches the fault map tool used to map fault actions and triggers to faults.
Type
Chooses the type of fault manager.
Calibratable Fault Map
This enables the fault action and triggers maps to be calibrated from the calibration tool.
Min Fault Actions / Fault
Number
Controls the minimum number of fault actions allowed per fault.
Min Fault Triggers / Fault
Number
Controls the minimum number of fault triggers allowed per fault.
Access Level
Sets the access level of this item in the calibration tool.
Function
String
Sets the location where this item appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.
