Raptor:TP Receive
Return to the main Raptor page
Return to Transport Protocol page
Description
This block is similar to the Raptor Read CAN Raw block; however it is designed to work for J1939 communication. This block is used to receive the raw bytes of a PGN. This block supports both multi-frame and single frame J1939 formats. If the PGN being received is always sent as a single frame message, it may be better to use the New Eagle Network Toolbox to receive the message do to the additional memory requirements of this block to support multi-frame messages.
Inputs
| Input | Type | Description |
|---|
Outputs
| Output | Type | Description |
|---|---|---|
| Priority | uint8 | Priority of the received transport protocol message. |
| Destination Address | uint8 | Destination Address of the received transport protocol message. |
| Source Address | uint8 | Source Address of the received transport protocol message. |
| Length | uint8 | Length of the received transport protocol message. |
| Data | uint8 | Data from the received transport protocol message. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| J1939 Bus Name | String | This is the name of the J1939 bus. |
| PGN | uint32 | The PGN to receive. |
Supported Versions
- Raptor 2013a_0.0.1 and newer