This block implements PGN 41984 Scaled Test Results (DM30). SLOT input describes a parameters Scaling, Limits, Offset and Transfer Function, see J1939-71 Appendix A.
Inputs
Input
Type
Description
test ids[]
uint8[]
Test identifiers
spn[]
uint32[]
SPN of scaled test results
fmi[]
uint8[]
FMI of scaled test results
slot[]
uint8[]
SLOT input describes a parameters Scaling, Limits, Offset and Transfer Function, see J1939-71 Appendix A.
value[]
uint16[]
The test value collected during the test. If the test performed does not have both a test limit minimum and maximum, then the appropriate limit value (Maximum or Minimum) should be set to all ones. SAE J1939-71 defines this to mean not available.
max[]
uint16[]
Test Minimums, The test value must be less than or equal to Test Limit Maximum in order for the test to pass.
min[]
uint16[]
Test Maximums, The test value must be greater than or equal to Test Limit Minimum in order for the test to pass.
