Raptor:DTC Send

Description

This block is used by many of the DM blocks which must return a list of faults in a given state. It should not be used without fully understanding underlying mechanisms of the Raptor OBD Fault Manager.

Inputs

Input	Type	Description
tx_src	uint8	Transmit Source Address
tx_dst	uint8	Transmit Destination Address

Outputs

Output	Type	Description

Parameters

Parameter	Type	Description
J1939 Bus Name	String	This is the name of the J1939 bus.

Supported Versions

Raptor 2013a_0.0.1 and newer