Sevcon Traction Inverter
Sevcon
Product Summary
Gen4 Size 6
Thanks to the high efficiency it is possible to integrate these controllers into very tight spaces without sacrificing performance. The design has been optimised for the lowest possible installed cost while maintaining superior reliability in the most demanding applications.
Features
- Absolute UVW encoder input
- AC induction motor
- Up to 80V DC supply voltage
- Up to 780A Boost current (650A Peak)
- Integrated fuse holder
- Advanced flux vector control
- Hardware & Software failsafe
- IP66 Protection
Datasheet & Manual
Click here for GEN4 Size 6 Datasheet
A manual is available with NDA and direct contact with sales. Please Contact Sales.
Gen4 Size 8
This AC motor controller has been designed to meet the high performance requirements of on-road and off-road electric and hybrid electric vehicles. A compact, rugged and cost-effective design, the Gen4 S8 is well suited for EV OEMs, EV conversions and EV drive train system integrators.
Supported Motors
- Remy 250-115-DOM
- Remy 250-90-DOM
Click here for Remy motor information.
Features
- AC permanent magnet synchronous motor
- AC induction motor
- Up to 400V DC supply voltage
- Up to 100kW peak power output
- Integrated logic circuit
- Includes an additional dedicated safety supervisory processor
- Will have dual processing and conform to automotive safety standards
- IP66 Protection
Datasheet & Manual
Click here for Gen4 Size 8 datasheet
A manual is available with NDA and direct contact with sales. Please Contact Sales.
Webstore
Gen4 Size 10
An AC motor controller designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV). Its high voltage range, up to 800VDC, is well matched to the needs of the automotive and commercial transport markets. The same hardware platform handles both AC Induction and Permanent Magnet AC motor technologies.
Features
- Up to 800V DC peak supply voltage
- Up to 300kW peak power output
- Up to 150kW continuous power output
- Advanced flux vector control
- 12V or 24V nominal supply
- Integrated logic circuit
- Includes an additional dedicated safety supervisory processor
- Designed for ISO26262 ASIL C compliance
Datasheet
Click her for Gen4 Size 10 datasheet
HVLP 20
A new range of low power AC motor controllers/inverters designed primarily for ancillary control of pumps and fans on hybrid and electric buses, agricultural implements, tractors and other high voltage vehicles. There are 5 models in the range, which cover both liquid cooled and air cooled designs, along with a double air cooled controller.
Features
- 200V to 800VDC battery voltage
- Up to 53A peak current (HVLP-20)
- Up to 33A continuous current (HVLP-20)
- Advanced flux vector control
- 12V or 24V nominal supply
- High Voltage Interlock (HVIL)
- CAN J1939 compatible
- AC Permanent Magnet synchronous motor
- AC Induction motor
- Resolver, Sin/Cos, AB or absolute UVW encoder (hall effect) sensing systems
- Robust all alloy housing IP6K9K - IP67
Datasheet
Click here for datasheet