Using ATI Vision with Raptor

ATI Vision

Online Calibrations

While New Eagle's Raptor-Cal offers the most integrated support of typical calibration methodology workflows, we understand that you may already be familiar with a particular third-party calibration tool. As a result, Raptor-Controllers and Raptor-Displays support the industry standard XCP protocol, available in common calibration tools.

• Open ATI Vision and select 'File->New...->Project File'
  • Name the project file

• Right click on 'Computer', then click 'Add Device...'

• Select 'USB Port'

• Click 'OK'

• Right click on 'USB', then click 'Add Device...'

• Select 'USBCan II/Memorator/Leaf CAN Channel' or your CAN adaptor

• Enter a name and press 'OK'

• Select the 'Settings' tab and enter the appropriate baud rate

• Right click on your adaptor (USBcan), then click 'Add Device...'

• Select 'XCP Controller Device' and then the name of the device in the subsequent dialog and press 'OK'

• Press 'OK'

• Right click on your XCP device (PCM) and click 'Add Strategy...'

• Navigate to 'C:\Vision Projects\<ModelName' and select the strategy file you want to use

• Right click on '[Base Calibration]', then 'Save As...' and save a copy
  • You must create a copy in order to edit calibrations

• Select 'File->New...' then 'Screen File'

• When the new screen file opens, right click in the background and select 'Add Data Item Controls...'

• • Select and add the items you would like to display

• Press the '!' button near the bottom left to go online

• Press 'Upload the strategy and calibration currently in the device' to pull the values from the ECU

• Proceed to upload by pressing 'Start'

• When the upload is complete, press 'Close'. You are now online

Merging offline Calibration Changes

• Once you have made offline changes or opened your calibraion file, right click on the ECU device in the tree (PCM), then 'Export Memory Image'.

• Select 'Intel Hex-Record File'.

• Choose a location and save the file with a .hex extension.

• Click finish

• Open New Eagle's 'Raptor-Cal'
  • See Raptor-Cal for more information
• Click 'Program' > 'Create Raptor Package'

• Click on 'Program File (.Hex) and navigate to your new .hex file with offline calibration
  • Click 'start'

• Save the .rpg file created
  • Close the Raptor Package program
• Navigate to the 'Raptor-Cal' homepage and click 'Flash'

• Once the module (ECU) has been detected, click 'Select'
• Navigate to C:\ECU\RPG and open the .rpg file saved from using the Raptor Package program

• Once the file is opened, it will automatically flash the ECU with offline calibrated changes