How to program a BIN file into a KAntrak display

From NewEagleWiki
Revision as of 02:01, 17 November 2010 by 107.4.110.88 (talk) (Created page with ' A 'BIN' file contains the compiled applcation code that will run in a CANtrak 2600 or 2610 display. Programming the device can be accomplished using Hyperterminal (available by …')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A 'BIN' file contains the compiled applcation code that will run in a CANtrak 2600 or 2610 display. Programming the device can be accomplished using Hyperterminal (available by default on Windows XP PCs).

To program the display:

  • Use Hyperterminal on the serial port with 57600 baud (8N1)
  • With the device powered up, hold the left two buttons down until it shows the boot screen
  • When you have Hyperterminal up hit Enter twice for the boot menu
  • Option 2 lets you program, you want to send the file across using Transfer->Send File with 1K Xmodem in Hyperterminal


See Screenshots below:




Retrieved from "https://wiki.neweagle.net//index.php?title=How_to_program_a_BIN_file_into_a_KAntrak_display&oldid=2509"