Autonomous Systems

New Eagle > Products Wiki > Autonomous System Products

Introduction

New Eagle develops and supplies components to Autonomous Systems development. The most common offer is the Raptor line of controllers starting with the GCM196 as a Vehicle Interface Module (VIM), acting as a Drive By Wire (DBW) interface between the AI "Brain" and the vehicle or actuator system.

VIM Controller

Processor	Inputs	Outputs	Communications	Operating Voltage
260 MHz Infineon Tricore TC1793	45	45	3 CAN, 1 LIN	6-16VDC

Picture	Part Number	Webstore	Downloads	More Information
	GCM-1793-196-1503	Purchase	Datasheet	More Details

Drive By Wire Systems

Chrysler Pacifica

The New Eagle Pacifica Drive-by-wire kit is a complete solution for control of the vehicle actuation systems include throttle, braking and steering. The system uses the GCM-196 VIM to interface with the vehicles systems. A computer running the ROS framework along with specially designed nodes communicate with the VIM to provide control commands. For testing of the by-wire system a game controller can be used.

New Eagle provides its ROS libraries at http://wiki.ros.org/pacifica_dbw to help developers create their own application.

Throttle-By-Wire

Throttle control is achieved by intercepting and emulating the signal from the existing throttle pedal on the vehicle using New Eagle's Pedal Emulator module. This method requiring NO additional actuators on the pedal itself and minimizes the latency for control. The system can respond faster than any human due to its 200 Hz control loop. The Pedal Emulator module passes through the driver's pedal input, until activated by the DBW control module. This ensures that accelerator pedal control is always returned to the driver in the event of a fault or emergency stop input.

Steer-By-Wire

Steering control is achieved by interacting with the system’s existing electronic power steering module, requiring NO additional actuators and minimizing the latency for control. Controlling the OEM power steering system makes for a clean interface, simple installation process, and leverages qualified automotive-grade parts to eliminate safety concerns.

Brake-By-Wire

Braking control is achieved by intercepting and emulating the PWM signal from the existing brake pedal on the vehicle, requiring NO additional actuators and minimizing the latency for control. This system leverages both the on-board regen as part of the HEV system and the ABS braking system. In the DBW control software, the emergency stop button & fault actions can be configured to either switch brake control back to the OEM pedal input (if a safety driver is present) or apply the brakes and bring the vehicle to a stop (if no safety driver is present). This makes New Eagle's DBW kit suitable for any level of autonomy.

Shift-By-Wire

Shift control is achieved by intercepting signals from the existing electronic shift actuator to move between Park, Reverse, Neutral, and Drive modes. New Eagle's DBW system can be customized to work with either CAN-based or hardwired electronic shift modules.

Mounting & Packaging

Polaris GEM

Take advantage of the Raptor Ecosystem when developing your autonomous system on the Polaris GEM platform. Contact our sales team to discuss how New Eagle can help.

Contact Us

To learn how to apply the GCM196 as a VIM or for questions or more information, please contact sales@neweagle.net. Please check back often as we are adding more autonomous stuff to our offering.