Electric Traction Inverters
Phoenix
Product Summary
PD 300
The PD300 inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control. The high-voltage, high-power modules are designed to work at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal management system is liquid-cooled for robust and reliable performance over the life of the system.
Features
- Compact and rugged
- Rated from 80KVA to 300KVA
- 180VDC to 750VDC System Voltage
- Dual high speed CAN
Datasheet
PD 550 Single
The PD550-Single inverter is based on high performance DSP Real-Time embedded software to support advanced features such as field-oriented control. The high-voltage, high-power modules are designed to work at maximum efficiency with complete monitoring capabilities to ensure control under all conditions. The thermal management system is liquid-cooled for robust and reliable performance over the life of the system. Features
- Compact and rugged
- Rated from 80 KVA to 300 KVA
- 180 VDC to 750 VDC System Voltage
- Dual high speed CAN
Datasheets PD 550 Single Datasheet
PD 550 Dual
Sevcon
Product Summary
Gen4 Size 8
This AC motor controller has been designed to meet the high performance requirements of on-road and off-road electric and hybrid electric vehicles. A compact, rugged and cost-effective design, the Gen4 S8 is well suited for EV OEMs, EV conversions and EV drive train system integrators.
Features
- AC permanent magnet synchronous motor
- AC induction motor
- Up to 400V DC supply voltage
- Up to 100kW peak power output
- Integrated logic circuit
- Includes an additional dedicated safety supervisory processor
- Will have dual processing and conform to automotive safety standards
- IP66 Protection
Gen4 Size 10
An AC motor controller designed to meet the high performance requirements of on-road and off-road Electric (EV) and Hybrid Electric Vehicles (HEV). Its high voltage range, up to 800VDC, is well matched to the needs of the automotive and commercial transport markets. The same hardware platform handles both AC Induction and Permanent Magnet AC motor technologies.
Features
- Up to 800V DC peak supply voltage
- Up to 300kW peak power output
- Up to 150kW continuous power output
- Advanced flux vector control
- 12V or 24V nominal supply
- Integrated logic circuit
- Includes an additional dedicated safety supervisory processor
- Designed for ISO26262 ASIL C compliance