| Platform |
Availability |
Core |
Memory |
Inputs |
Outputs |
COMM |
Environment |
software
|
| Microcontroller |
Clock Frequency |
Internal Flash |
External Flash |
EEPROM |
Internal SRAM |
External SRAM |
Supply Voltage |
Emergency stop inputs |
Switch inputs |
Frequency inputs |
Crank position input type |
Analog Inputs (10-bit) |
Knock Inputs |
O2 Sensor Inputs |
High current drivers (10A) |
Medium current drivers (3A) |
Current controlled drivers |
Low current drivers (500ma) |
Relay drivers (<250ma) |
Main Power Relay low-side driver |
Injector Drivers |
Logic outputs or spark triggers |
Direct ignition coil drivers |
Low Current H Bridge Driver |
High Current H Bridge Driver |
Sensor Excitation |
CAN 2.0B |
USB 1.1 |
Serial |
Shutdown |
Operating Temp Range |
Construction |
Connector |
Motohawk or SIMULINK |
C API
|
| ECM S12-24 |
In production |
Freescale HCSS12 |
24 MHz |
128K |
|
2k Internal |
2k |
|
8-16V |
|
|
|
VR/Hall mode SW selectable |
7-12 |
|
1 single ended ego |
|
1-4 low-side |
|
1 low side |
|
|
1 (up to 4 high impedance loads) |
0 or 3 (5V) triggers |
|
0 or 1 (5A) w/current sense |
|
1 (5V) Sensor supply (250ma max) |
1 or 2 |
|
|
not SW controlled |
-40C to 105C |
Plastic Housing |
24-Pin Delphi |
yes |
|
| ECM S10-60 |
Call for availablity |
ST Micro F273M |
40MHz |
512K |
|
2K (off-microcontroller) |
|
32K |
6-24 V |
|
3 |
1 Differnetial VR/2 Hall |
|
6 |
|
2 EGO sensor circuits |
|
|
|
6 short-protected |
2 short-protected |
|
|
|
2 |
|
|
|
2 |
|
1 |
|
-40C to +105C |
|
60-pin Tyco |
Available |
yes
|
| ECM XC2-24 |
Call for availability |
Infineon XC2xxx |
40-66 MHz |
2 K - 1 M |
|
None |
upto 23 K |
|
7.5-20 V |
|
1 |
1 Differential VR |
|
4 |
|
2 HEGO (Heater) (optional) |
|
|
4 low-side |
2 |
|
2 |
|
2 |
|
|
1 (5V) Sensor supply (100ma max) |
0 |
|
ISO-9141 |
SW controlled |
20C to +60C |
Sealed overmolded Aluminum base |
|
Available |
yes
|
| ECM 555-48 |
In production |
Freescale MPC555 |
40 MHz |
448K |
|
4K or 8K (serial) (Dev't version: 128K) |
26K |
|
8-16V |
|
4 Hall type (PU) |
VR or Hall (model dependent) |
12 |
1 or 2 (DSP) |
|
1 or 2 low-side (PWM) |
1 low-side PWM, 1 low-side discrete |
|
1 low-side PWM |
|
1 |
4 (high impedance) |
4 (5V), 1 (12V) |
|
|
|
1 (5V) Sensor supply 350ma max |
1 |
|
RS-485 |
SW controlled (via MPRD Relay) |
-40C to 85C |
Stamped Aluminum |
48-pin Tyco |
yes |
|
|