MotoViewer

MotoViewer™

MotoViewer™ is MotoTron's PC-based display tool targeted at end-user / service situations. The MotoViewer tool contains a subset of the functionality provided by MotoTune. A user friendly, intuitive MS Windows-based display interface provides the user with easy access to all of the display-related RAM and ROM parameters contained in a MotoTron control unit.

MotoViewer™ consists of a basic window with a Menu Bar, a Display Area and a Status Bar. MotoViewer is able to open display files (*.dis) created with MotoTune. Since it can only use display files, normal calibrations are not available. Most of the time, MotoViewer is used to inspect the values of MotoHawk probes. If, however, you need to allow the user to modify values in a production system (FLASH module), you will need to allocate calibrations to 'Display NV' in your MotoHawk model. This will allow the signal to be shown within a display file (*.dis) as well as allowing the value to persist through a key-cycle (power down) of the module.

Main Window This is the main window with the Menu Bar, Display Area and Status Bar:

Using MotoViewer

When you open MotoViewer™ through the display shortcut on the desktop, MotoViewer™ should open with the selected display on the screen. The display will be populated with display parameters for the connected module. If there is no display shortcut on the desktop, you will need to first open MotoViewer™ independently. Once MotoViewer™ is opened, click on File on the Menu Bar and select Open from the sub-menu. You can also make use of the default shortcut key by typing Alt+O. Select the required display file to open a display. Another way to open a display is to click on File from the Menu Bar and move the mouse pointer over Recent Display. A list of recently opened display should now pop out. This is a much faster way of opening displays which you have been viewing recently.

About MotoViewer™

Click the Help on the Menu Bar and select About MotoViewer to view application and driver version.

Menu Bar

The Menu Bar consists of the File, View, Tools and Help menus.

Display Area

The Display Area is where all opened displays will be placed. You also have the ability to customize the background of the Display Area. See Display Options for details.

Status Bar

The Status Bar will display the current status of the connected module. Click on View from Menu Bar to click on Status Bar to display or hide the bar.

Toolbars

Additional toolbars can be easily added by using the Customize option.

Display Options

Click on View on the Menu Bar. Select Options from the sub-menu to access the Display Options. You can also right-click on the Display Area and select Options from the menu that pops up.

Preferences

Click on File from the Menu Bar and select Preferences from its sub-menu. From the Preferences window, you will have access to the Locations and General tabs. From the Locations tabs you can change the locations of both the log files and the folder where all display files are found. From the General tab, you can reset the toolbars and Workspace.

Customizing the Toolbar

Toolbars Tab allows you to add, rename, delete and reset toolbars. There are not default toolbars so all toolbars will have to be created from scratch.

The Commands Tab allows you to drag and drop the various built-in commands or menus onto any existing toolbars on the main window. The commands are divided into the following 4 different categories:

• File
• View
• Tools
• Help

The Keyboard Tab allows you to Assign, Remove or Reset All shortcut keys to commands.

The Tools Tab gives you the powerful ability to add a quick-launch button to bring up other useful tools from within MotoViewer™.

The Options tab will feature settings and options for you to personalize the various toolbars and menus. These features are divided to 2 sub-sections: Personalized Menus and Toolbars, Other.

Troubleshooting

Remember that for MotoViewer™ to work, you must have a licensed dongle plugged into the computer. See Troubleshooting if licensee name does not show up.

Most commonly occurring problems you may come across are caused by synchronization or connection problems between MotoViewer™ and the module while programming the module. Below are a few things you can check to rectify these problems.

• Check that the module has been powered up.
• Check that the USB-to-CAN cable has been connected properly.
• Check the port configuration of MotoServer has been configured properly.
• Check if you have a licensed dongle and it has been plugged properly into the USB port. (Moving the mouse pointer over the MotoServer icon on the icon tray will determine if the dongle is plugged properly and that you have a licensed dongle)
• Close both the MotoServer and MotoViewer™, then restart MotoViewer™. (MotoServer will restart automatically once you reopen MotoViewer™)