Raptor:LIN Definition
Jump to navigation
Jump to search
Return to the main Raptor page
Description
This block is used to create a LIN bus resource and map it to a particular hardware I/O point. This block will generate all the code necessary to connect and coordinate all the Raptor LIN blocks with the hardware LIN interface. Each LIN bus that will be used in the model must include a LIN definition block.
Parameters
| Parameter | Type | Description |
|---|---|---|
| LIN Bus Name | String | Provides the logic LIN bus name for linking to other LIN blocks (Rx/Tx). |
| Hardware Resource | Specifies which hardware resource to allocate for this LIN Bus. | |
| Baud Rate | Specifies baud rate to be used when configuring the LIN hardware. | |
| LDF File | Provides the name of the LDF file which describes the LIN network connected to the associated LIN hardware resource. The LDF file should be placed inside the model directory (e.g. 'LIN' folder). |