Raptor:OBD Fault Status

Description

This block outputs the status of the specified fault.

Output	Type	Description
Suspected	boolean	Boolean indicating if the fault is in the Suspected state.
Failed DC	boolean	Boolean indicating if the fault is in the Failed This Drive Cycle state.
Test Cmplt DC	boolean	Boolean indicating if the fault is in the Test Completed This Drive Cycle state.
Failing	boolean	Boolean indicating if the fault is in the Failing state.
Pending	boolean	Boolean indicating if the fault is in the Pending state.
Confirmed	boolean	Boolean indicating if the fault is in the Confirmed state.
MIL	boolean	Boolean indicating if the fault is in the MIL state.
Permanent	boolean	Boolean indicating if the fault is in the Permanent state.
Ready	boolean	Boolean indicating if the fault is in the Ready state.
Prev Confirmed	boolean	Boolean indicating if the fault is in the Previously Confirmed state.
Fail Since Clr	boolean	Boolean indicating if the fault is in the Failed Since Clear state.
Fail Last DC	boolean	Boolean indicating if the fault is in the Failed Last Drive Cycle state.

Parameter	Type	Description
Fault Source		Selects source of fault to get the status of.
Fault Name	String	This is the name of the fault to get the status of (only available in certain modes).
Suspected		Enables the Suspected output port.
Failed This Drive Cycle		Enables the Failed This Drive Cycle output port.
Test Completed This Drive Cycle		Enables the Test Completed This Drive Cycle output port.
Failing		Enables the Failing output port.
Pending		Enables the Pending output port.
Confirmed		Enables the Confirmed output port.
MIL		Enables the MIL output port.
Permanent		Enables the Permanent output port.
Ready		Enables the Ready output port.
Previously Confirmed		Enables the Previously Confirmed output port.
Failed Since Last Clear		Enables the Failed Since Last Clear output port.
Failed Last Drive Cycle		Enables the Failed Last Drive Cycle output port.