Raptor:Standard Fault State Iterator
Jump to navigation
Jump to search
Return to the main Raptor page
Description
This block searches through all the faults which are in one of the specified states. The block begins searching at the next fault after the specified previous fault. If the previous fault input is set to the null fault the search will begin at the start of the fault list. When the block reaches the end of the fault list without finding any faults causing the action to be true it will output the null fault. This can be used as a stop condition if executing this block in a while loop to iterate through a sequence of faults.
Inputs
| Input | Type | Description |
|---|---|---|
| Prev Fault | idx | The index of the previous fault. |
Outputs
| Output | Type | Description |
|---|---|---|
| Fault | idx | The index of the current fault. |
Parameters
| Parameter | Type | Description |
|---|---|---|
| Not Occurred | Finds faults in the not occurred state. | |
| Suspected | Finds faults in the suspected state. | |
| Active | Finds faults in the active state. | |
| Occurred | Finds faults in the occurred state. |