Raptor-Dev-Modbus-Library

From NewEagleWiki
Revision as of 13:31, 4 April 2018 by 107.4.110.88 (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

New Eagle > Products Wiki > Raptor Platform > Raptor-Dev > Raptor-Dev Modbus Library

Overview

This library exposes a block interface for the Modbus protocol. This protocol is useful for many industrial application. The library handles many of the details under the hood, so the end-user can configure which modbus registers to read (master) or to write (slave). The library abstracts the details of the protocol into a simple block interface consisting of just a handful of blocks and configuration scripts.

Blocks

Block Description Appearance
Modbus Master

This block acts as a Modbus master on a serial bus.

Application Monitor Measure block
Application Monitor Measure block
Modbus Slave

This block acts as a Modbus slave on a serial bus.

Application Monitor Measure block
Application Monitor Measure block
Modbus Slave Error

This block will send a MODBUS Error Response.

Application Monitor Measure block
Application Monitor Measure block
Modbus Slave Response

This block is used to package and send a response to a request.

Application Monitor Measure block
Application Monitor Measure block

Details

Modbus specification may be downloaded from (modbus.org): PI_MBUS_300

Modbus Master currently supports the following commonly used service(s):

  • 03 Read Holding Registers

Modbus Slave currently supports the following commonly used service(s):

  • 03 Read Holding Registers
  • 06 Preset Single Register

This library may be used on Raptor targets which expose a serial (RS232/RS485) interface such as the DISP-IMX286 (VEECAN) targets.