Raptor:Analog Output

From NewEagleWiki
Revision as of 13:05, 12 September 2023 by Jwoytsek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Return to the main Raptor page

Return to Input & Output page

Raptor™ Analog Output

Description

This block sets the value of an analog output. An analog output is typically a voltage output at an output pin on the module.

Inputs

Input Type Description
Enable Boolean Enables the output. When the output is disabled the output pin is not driven high or low.
Analog Output uint16 Value to output


Parameters

Parameter Type Description
Hardware Resource Specifies which output from the hardware is being accessed.