Raptor:Fault Data Definition

From NewEagleWiki
Revision as of 17:30, 13 September 2023 by Jwoytsek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Return to the main Raptor page

Return to Faults page

Raptor™ Fault Data Definition

Description

This block defines a fault data store. This will create a data store which contains a unique value for each fault. This can be used to manage data items that must be associated with each fault.

Parameters

Parameter Type Description
Data Name String This is the name of the fault data store to access
Initial Value Number or Vector or struct Defines the initial value of the fault data store.
Data Type Specifies the data type of the data store.
Storage Specifies the storage class of the data.
Visible in Cal Tool checkbox Makes the fault definition visible while using the calibration tool.
Type Specifies whether the value is a measurement or an adjustment.
Display as Specifies how the value is displayed.
Gain number This controls the scaling used to display the data in the cal tool.
Offset number This controls the scaling used to display the data in the cal tool.
Max number Sets the maximum value that can be set to any table data point in the calculation.
Min number Sets the minimum value that can be set to any table data point in the calculation.
Display Format format string Sets the display format to use in the calibration tool.
Unit Text string Sets the unit text that is displayed in the calibration tool.
Help text string Sets the help text that is displayed in the calibration tool.
Access Level Sets the access level of this item in the calibration tool.
Function string Sets the location where the variable appears in the calibration tool. Use raptor_xcp_function(gcb) to create a function based on the variables location in the model.