Raptor:Internal Measurement

From NewEagleWiki
Revision as of 18:54, 13 September 2023 by Jwoytsek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Return to the main Raptor page

Return to Input & Output page

Raptor™ Internal Measurement

Description

This block reads the value of an an internal measurement. An internal measurement is a measured value which is internal to the control module.

Outputs

Output Type Description
Value double The value of the measurement.

Parameters

Parameter Type Description
Hardware Resource Specifies which internal measurement from the hardware is being read.
Output Engineering Units Determines whether the block outputs the raw ADC count or scaled engineering units of the measurement.