Kvaser
|
Kvaser develops interfaces and data loggers for any flavor of CAN and CAN related buses to meet customer system requirements. The Kvaser USB to CAN devices are the approved products of MotoHawk. Kvaser tools are easy to use, accurate and state-of-the-art. Rigorous quality assurance and control processes for both hardware and software ensures that Kvaser delivers a user-friendly and up-to-date tool. Also using Kvaser products is recommended to be used with MotoHawk applications because it is all compatible and other tools may not be compatible. Kvaser products are also very cost effective. The Kvaser USB to CAN cables are compatible with USB 3.0 ports, but not with USB/ eSATA ports.
Single Channel Kvasers
New Eagle High-Speed USB to CANThe New Eagle Branded HIGH-SPEED USB TO CAN INTERFACE represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and 9-pin D-SUB connector, the sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Now with galvanic isolation as standard. Equivalent Part Number: Kvaser 685-0
Leaf Light HS v2 J1939-13 TYPE IIThe Leaf Light HS v2 J1939-13 TYPE 2 provides a simple way of connecting a PC with the on-board computer of any J1939 compliant commercial vehicle for diagnostic purposes by means of its USB 2.0 connector and a 9-pin J1939-13 compliant CAN connector. Having made its name as the work-horse of USB to CAN interfaces, Kvaser's Leaf Light product series provide reliable, low cost tools for connecting any CAN network to a PC or mobile computer in marine applications and beyond.
Leaf Light Rugged HSKvaser Leaf Light Rugged is a one channel USB interface for CAN. While the internal components are the same as the popular Leaf Light HS, the rugged IP65-rated housing assures reliable protection against water and dust in harsh environments.
BlackBird v2Kvaser BlackBird v2 is a high performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range. More onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks, or for monitoring a CANbus while in motion. Based on radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2's API is “device agnostic” and can be used on a tablet, smartphone, or PC.
Linx J1587Kvaser Linx is a single channel, add-on cable that provides access to a J1587 bus network. It connects to your existing Kvaser CAN interface or datalogger in series. Compatible with any Kvaser CAN HS device.
OEM Leaf
Ethercan Light HSThe Kvaser Ethercan Light HS CAN to Ethernet interface facilitates the adoption of the Internet of Things (IoT) concept within modern manufacturing environments by enabling data from any CAN product or system to be accessed over the Internet, via an Ethernet equipped PC.
Leaf Light HS v2 CBThe Leaf Light v2 CB is the bare circuit board version of Kvaser's popular Leaf Light v2 interface - a single-channel, high speed, USB-to-CANbus interface. Having made its name as the work-horse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low cost connection to the PC.
Leaf Light HS v2 OBDIIThe Leaf Light v2 OBDII provides a simple way of connecting a PC with a vehicle’s on-board computer by means of USB 2.0 connector and a 16-pin OBDII-compliant CAN connector. Having made its name as the work-horse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low cost tools for connecting any CAN network to a PC or mobile computer in vehicle diagnostic applications and beyond.
Leaf Light HS v2 M12The Leaf Light HS v2 M12 is the marine version of Kvaser’s popular Leaf Light v2 interface. This device provides a simple way of connecting a PC with the on-board computer of a marine electronics system by means of its standard USB 2.0 connector and a 5-pin National Marine Electronics Association (NMEA) approved CAN connector. The Leaf Light HS v2 M12 is ideal for diagnosing NMEA 2000 bus issues, configuring and flashing NMEA 2000 bus nodes, monitoring NMEA 2000 bus traffic and load conditions and stimulating or emulating NMEA 2000 nodes.
Leaf Pro HS v2Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that bring programmability to user’s fingertips, as well as CAN with Flexible Data-Rate (CAN FD). Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin DSUB, bus is also available with a 16-pin OBDII connector. Please see Kvaser Leaf Pro HS v2 OBDII for details.
Leaf Pro HS v2 OBDIIKvaser Leaf Pro HS v2 OBDII is an evolution of the Leaf family that bring programmability to user’s fingertips, as well as CAN with Flexible Data-Rate (CAN FD). Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a 16-pin OBDII connector, but a version with a standard 9-pin DSUB is also available. Please see Kvaser Leaf Pro HS v2 for details.
Leaf Professional Rugged HSKvaser Leaf Professional Rugged is a one channel, very high performance, USB interface for CAN. With a IP65 rated aluminium housing, it offers the possibility to easily connect your PC and CANbus network. Includes Kvaser's patented MagiSync feature for synchronized time-stamping, and Galvanic Isolation for protection against voltage spikes.
Leaf Professional LSKvaser Leaf Professional is a one channel, high performance, USB interface for Low Speed CAN. A versatile and powerful interface that offers easy connection between your PC and CANbus network, it includes Kvaser's patented MagiSync feature for synchronized time-stamping, Galvanic Isolation for protection against voltage spikes, and Auto Transmit for placing messages on the bus at set intervals.
Leaf Professional SWCKvaser Leaf Professional is a one channel, high performance, USB interface for Single Wire CAN. A versatile and powerful interface that offers easy connection between your PC and CANbus network, it includes Kvaser's patented MagiSync feature for synchronized time-stamping, Galvanic Isolation for protection against voltage spikes, and Auto Transmit for placing messages on the bus at set intervals.
Leaf Professional LIN
Memorator Light HSDesigned for troubleshooting any CAN-based (controller area network) system, the Kvaser Memorator Light HS is an easy-to-use tool for logging serial data, with no preconfiguration or software setup required. With an autobaud function that determines CAN bus bit rate, the Kvaser Memorator Light can be attached to any high-speed CAN bus without configuration. All CAN bus traffic is logged in a circular buffer, overwriting the oldest data when the buffer becomes full. A separate circular buffer keeps track of error frame conditions and the message traffic that occurs near the conditions.
CAN/CAN FD to USBThe Kvaser U100 is a small, yet powerful, CAN to USB interface. It provides real-time transmission and reception of standard and extended CAN messages on the bus with a high timestamp precision, and is compatible with applications that use Kvaser's CANlib.
Multi Channel Kvasers
Kvaser USBcan Light 2xHSThe Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective means of connecting two high speed CAN busses to a PC or mobile computer. With a USB 2.0 compliant connector at one end and two 9-pin D-SUB connectors at the other, the Kvaser USBcan Light 2xHS is a fraction larger than the one-channel Leaf Light v2 but features the same sleek, ergonomically designed housing that Kvaser products have become renowned for and comes with galvanic isolation as standard.
USBcan Light 4xHSThe USBcan Light 4xHS is a compact, reliable and cost-effective means of connecting four high speed CAN buses to a PC or mobile computer. With galvanic isolation as standard, this USB to quad channel CAN interface has a standard USB connector at one end and four high speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9pin DSUB connectors.
USBcan Professional 2xHS v2The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.
USBcan Professional RJ45The Kvaser USBcan Professional RJ45 is a high performance, two channel CAN (controller area network) bus interface. A standard USB1.1 connection enables several interfaces to be easily connected to a PC. Standard RJ45 connectors allow the user to connect to the CANbus via ethernet port.
USBcan Professional 5xHSKvaser USBcan Pro 5xHS is a five channel, high performance, CAN bus interface that provides a quick and flexible way to connect your PC to multiple CAN bus, in real-time. With all channels configured for High Speed CAN (ISO 11898-2), the Kvaser USBcan Pro 5xHS handles transmission and reception of standard and extended CAN messages on the bus with a high time stamp precision. This device is CAN FD ready.
USBcan R v2The Kvaser USBcan R is robust, easy-to-carry device designed for high-end applications. Two CAN channels provide quick reaction times and high data throughput. The Kvaser USBcan R is perfect for rapid ECU re-flashing, advanced bus analyzers and efficient development work.
Memorator Professional 2xHS v2Kvaser Memorator Pro 2xHS v2 is a professional-level, dual channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Connected to a PC with USB1.1, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder. Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant. Additional Features:
Memorator Professional HS/LSKvaser Memorator Professional HS/LS is a two channel, high performance, CAN (controller area network) bus interface and data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC using USB2.0. As a data logger, the Kvaser Memorator Professional is the perfect tool to capture irregular faults in the field or perform remote diagnosis. Advanced configuration features such as message filtering, triggers and error detection mode are made with a user-friendly configuration program (Kvaser’s Memorator Tools software) and stored on the flash disk.
Memorator R SemiProKvaser Memorator R SemiPro is a ruggedised, two channel CAN bus interface and standalone Datalogger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC with USB2.0. The Memorator R SemiPro contains an advanced set of features: Message Filtering, Triggers, Error Detection Mode, Battery Backup, Integrated SD Card, Linx J1587 compatible, Galvanic Isolation and much more. Configurable using Kvaser's included Memorator Tools software.
Memorator 2xHS v2The Kvaser Memorator 2xHS v2 is a compact, dual channel CAN bus interface and standalone datalogger that allows users to monitor and collect data from two high speed CAN channels simultaneously. Standalone mode logs data to an SD card; interface mode provides a real-time connection between the CAN network and a PC, via USB.
Memorator HS/SWCKvaser Memorator HS/SWC is a dual channel, intermediate performance, CAN (controller area network) bus interface and standalone datalogger. This device has one CAN channel for High-Speed CAN and the second for Single-Wire CAN. In interface mode, it connects to a PC with USB1.1. As a data logger, Memorator makes for a perfect flight recorder due its compact design. Logging data to a standard SD card (supplied) or MMC disk; triggers, filters etc. can be set via our user-friendly configuration program and stored on the flash disk.
EagleKvaser Eagle is a flexible and powerful dual channel CAN to standard USB high-speed data logger that is capable of running user-developed scripts to suit a wide selection of CAN bus applications. It logs data from the CAN bus to a standard SD flash disk and supports high-speed CAN. Gateway/Bridge:
Memorator Professional 5xHSKvaser Memorator Professional 5 x HS is a five channel, high performance, CAN bus interface and standalone datalogger that allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB. Memorator Professional 5 x HS offers advanced features such as Message Filtering, Triggers, Error Detection and Generation, Silent Mode, an expandable SD Card slot, Galvanic Isolation, and much more. Configurable using Kvaser's Memorator Config Tool, it is also capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is supplied.
Memorator Professional 5xHS CBKvaser Memorator Professional 5xHS CB is a five channel, high performance, CAN (controller area network) bus interface and standalone datalogger that allows users to monitor and collect data from up to five CAN channels using just one device. It is supplied 'bare board' i.e. without a housing, and can thus be built into any system. The Memorator Professional 5xHS CB is CAN FD-ready. Configurable using Kvaser's Memorator Config Tool, Memorator Professional 5xHS CB is capable of running user-developed scripts, written in the Kvaser t programming language. Guidance in creating t programs is supplied. The device is also supported in CANlib, Kvaser’s universal software development kit.
Blackbird Semipro HS/HSKvaser BlackBird SemiPro is a powerful and versatile WLAN solution that is able to function over existing wireless infrastructure or to generate it's own 'hotspot' wireless network.
PCI KvasersKvaser Mini PCI Express HSThe Kvaser Mini PCI Express HS is a highly integrated CAN (controller area network) add-on board that lets embedded system developers add CAN functionality to any standard computer board with mini PCI Express capability. The add-on board offers a single channel, high-speed CAN interface with error frame detection and on-board buffer. This board has a low profile connector that complies with the mini PCI Express standard, which connects via a cable to a DSUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total system EMC performance is protected because all the electronics remain inside the computer housing.
Kvaser Mini PCI Express 2xHSOffering silent mode, error frame detection and an on-board buffer, this small form factor board fits any embedded data acquisition system, but is particularly suitable for fleet management to monitor key parameters such as fuel economy, engine speed, braking and accelerator pressure, and gearshift patterns.
Kvaser PCIEcan 4XHSKvaser PCIEcan 4xHS is a highly integrated, high-speed controller area network (CAN) card that adds four high-speed CAN network channels to any standard computer board with PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, this small form factor add-on board fits many embedded data acquisition systems and supports CAN FD.
Kvaser PCIcanx HS/HSKvaser PCIcanx HS/HS is a dual channel, high speed CAN (controller area network) interface that can be used in both regular PCI and PCI-X slots. A galvanically isolated CAN bus driver protects the hardware. The onboard CAN controller is I/O mapped for quick reaction times.
Kvaser PCIEcan 2xHS v2Kvaser PCIEcan 2xHS v2 is a highly integrated, high speed controller area network (CAN) network card that adds two high speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable. Offering silent mode, error frame detection/generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.
KVASER PCIEcan HS v2Kvaser PCIEcan HS v2 is a highly integrated, high speed controller area network (CAN) card that adds a single high speed (ISO 11898-2) CAN channel to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and lower profile than the Kvaser PCIEcan HS. Offering silent mode, error frame detection/generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.
Interface AccessoriesT-Cannector v2Kvaser T-cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Offering an adjustable CAN termination resistor (120/60/0 Ohm) it provides an affordable and safe way of terminating the CAN circuit when using Kvaser interfaces on a development board, as well as powering interface devices without internal power, such as Kvaser’s Blackbird and Memorator series.
D-sub 9 pin 120ohm Termination AdapterKvaser D-sub 9 pin 120 Ohm termination adapter is a CAN adaptor with a 9-pin male D-Sub connector at one end and a 9-pin female D-Sub socket at the other. Between CAN High (pin 7) and CAN Low (pin 2) there is a built-in 120 Ohm CAN terminating resistor.
Q-Cable 0.3mThe Q-Cable is a 0.3m (approx. 0.98 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. A DSUB male connector connects to the PCIcan board, whilst four DSUB male connectors connect to the CANbus.
Q-Cable 3mThe Q-Cable is a 3m (approx. 9.8ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. A DSUB male connector connects to the PCIcan board, whilst four DSUB male connectors connect to the CANbus. This variant helps to protect people and equipment from toxic and corrosive gasses by emitting limited smoke and no halogen when exposed to high heat sources.
OBDII to Dsub9 Adapter CableA Kvaser OBD II Adapter Cable connects any Kvaser CAN bus interface with a DSUB9 female connector to any vehicle with an OBD II (J1962) connector.
OBDII Extension Cable 2.5mKvaser's OBD II Extension Cable is a highly durable extension cable of 2.5 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
OBDII Extension Cable 5mKvaser's OBD II Extension Cable is a highly durable extension cable of 5 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
OBDII Extension Cable 10mKvaser's OBD II Extension Cable is a highly durable extension cable of 10 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
OBDII Extension Cable 15mKvaser's OBD II Extension Cable is a highly durable extension cable of 15 metres in length with male to female OBD II connectors. The cable is made of high quality thermoplastic rubber to ensure excellent flexibility and resilience. All pins are connected.
Discontinued/End of Life ProductsThe following are not being manufactured currently. If you would like to check on remaining stock that might be available, please contact sales.
Kvaser SoftwareKvaser offers 3rd party software for analysis, simulation, calibration, debugging, and more. Developers can download software and start developing around any Kvaser interface right away. CANKing  CANKing is a CAN bus monitor and general-purpose diagnostic tool. It is especially suited for interactive development work. CAN messages can be easily sent and the corresponding impact on the target module observed. To use CANKing it is necessary to purchase one of our CAN interfaces such as the Kvaser Leaf USB to CAN converters. It is a free software that comes with the Kvaser product. This product allows the user to see all CAN messages on the bus in either either decimal or hexadecimal forms. It also allows the user to send out simple test messages. Raptor-CANRaptor-CAN is an easy-to-use CAN data analysis PC tool. It helps test and verify real-time CAN systems. Key features include the ability to monitor and control CAN messaging, store CAN traffic and replay. Click here to learn more! Kvaser Database EditorKvaser offers a DBC File creator / editor which can be downloaded from here: Kvaser DBC Editor Download Contact UsFor questions or more information, please contact sales@neweagle.net |
