Kvaser: Difference between revisions

From NewEagleWiki
Jump to navigation Jump to search
 
(33 intermediate revisions by the same user not shown)
Line 1: Line 1:
Kvaser develops interfaces and data loggers for any flavor of CAN (controller area network) and CAN-related buses to meet customer system requirements. The Kvaser USB to CAN devices are the approved products of MotoHawk. Kvaser tools are easy to use, accurate and state-of-the-art. Rigorous quality assurance and control processes for both hardware and software ensure that Kvaser delivers a user-friendly and up-to-date tool. Kvaser products are recommended for use with MotoHawk applications because they are all compatible, whereas other tools are not guaranteed to be compatible. Kvaser products are also very cost-effective. The Kvaser USB to CAN cables are compatible with USB 3.0 ports, but not with USB or eSATA ports.
Kvaser develops interfaces and data loggers for any flavor of CAN (controller area network) and CAN-related buses to meet customer system requirements. The Kvaser USB to CAN devices are the approved products of MotoHawk. Kvaser tools are easy to use, accurate and state-of-the-art. Rigorous quality assurance and control processes for both hardware and software ensure that Kvaser delivers a user-friendly and up-to-date tool. Kvaser products are recommended for use with MotoHawk applications because they are all compatible, whereas other tools are not guaranteed to be compatible. Kvaser products are also very cost-effective. The Kvaser USB to CAN cables are compatible with USB 3.0 ports, but not with USB 1.0 or eSATA ports.




Line 78: Line 78:
==BlackBird v2==
==BlackBird v2==


Kvaser BlackBird v2 is a high-performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75 percent better range. More onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks or for monitoring a CAN bus while in motion. Based on a radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2's API is “device agnostic” and can be used on a tablet, smartphone or PC.
Kvaser BlackBird v2 is a high-performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range. More onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks or for monitoring a CAN bus while in motion. Based on a radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2's API is “device agnostic” and can be used on a tablet, smartphone or PC.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 171: Line 171:
==Leaf Pro HS v2==
==Leaf Pro HS v2==


Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that brings programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin D-SUB; bus is also available with a 16-pin OBDII connector. Please see Kvaser Leaf Pro HS v2 OBDII for details.
Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that brings programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin D-SUB; bus is also available with a 16-pin OBDII connector. Please see '''[[Kvaser#Leaf_Pro_HS_v2_OBDII|Kvaser Leaf Pro HS v2 OBDII]]''' for details.
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  


Line 189: Line 189:
==Leaf Pro HS v2 OBDII==
==Leaf Pro HS v2 OBDII==


Kvaser Leaf Pro HS v2 OBDII is an evolution of the Leaf family that bring programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customization using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a 16-pin OBDII connector, but a version with a standard 9-pin D-SUB is also available. Please see Kvaser Leaf Pro HS v2 for details.
Kvaser Leaf Pro HS v2 OBDII is an evolution of the Leaf family that bring programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customization using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a 16-pin OBDII connector, but a version with a standard 9-pin D-SUB is also available. Please see '''[[Kvaser#Leaf_Pro_HS_v2|Kvaser Leaf Pro HS v2]]''' for details.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 298: Line 298:


==CAN/CAN FD to USB==
==CAN/CAN FD to USB==
The Kvaser U100 is a small, yet powerful, CAN to USB interface. It provides real-time transmission and reception of standard and extended CAN messages on the bus with a high timestamp precision, and is compatible with applications that use Kvaser's CANlib.
The Kvaser U100 is a small, yet powerful, CAN to USB interface. It provides real-time transmission and reception of standard and extended CAN messages on the bus with high timestamp precision and is compatible with applications that use Kvaser's CANlib.
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  


Line 383: Line 383:


==USBcan Professional RJ45==
==USBcan Professional RJ45==
The Kvaser USBcan Professional RJ45 is a high-performance, two-channel CAN bus interface. A standard USB1.1 connection enables several interfaces to be easily connected to a PC. Standard RJ45 connectors allow the user to connect to the CAN bus via ethernet port.
The Kvaser USBcan Professional RJ45 is a high-performance, two-channel CAN bus interface. A standard USB 1.1 connection enables several interfaces to be easily connected to a PC. Standard RJ45 connectors allow the user to connect to the CAN bus via ethernet port.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 402: Line 402:


==USBcan Professional 5xHS==
==USBcan Professional 5xHS==
Kvaser USBcan Pro 5xHS is a five-channel, high-performance, CAN bus interface that provides a quick and flexible way to connect your PC to multiple CAN buses, in real-time. With all channels configured for High-Speed CAN (ISO 11898-2), the Kvaser USBcan Pro 5xHS handles transmission and reception of standard and extended CAN messages on the bus with a high timestamp precision. This device is CAN FD ready.
Kvaser USBcan Pro 5xHS is a five-channel, high-performance, CAN bus interface that provides a quick and flexible way to connect your PC to multiple CAN buses, in real-time. With all channels configured for High-Speed CAN (ISO 11898-2), the Kvaser USBcan Pro 5xHS handles transmission and reception of standard and extended CAN messages on the bus with high timestamp precision. This device is CAN FD ready.
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  


Line 440: Line 440:


==Memorator Professional 2xHS v2==
==Memorator Professional 2xHS v2==
Kvaser Memorator Pro 2xHS v2 is a professional-level, dual-channel CAN bus
Kvaser Memorator Pro 2xHS v2 is a professional-level, dual-channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Connected to a PC with USB 1.1, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real-time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder. Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant.
interface and standalone data logger offering advanced features such as
message filtering, triggers, error detection and generation, silent mode, an
expandable SD card slot up to 64G, and galvanic isolation.
Connected to a PC with USB1.1, the Kvaser Memorator Pro 2xHS v2 operates
as a powerful real-time CAN to USB interface, whilst in data logger mode, the
compact design of this device makes for the perfect flight recorder.
Configurable using Kvaser's Memorator Config Tool, this device is
capable of running user-developed scripts written in the Kvaser t
programming language. Guidance in creating t programs is provided. The
Kvaser Memorator Pro 2xHS v2 is CAN FD compliant.


Additional Features:
Additional Features:
*  Supports CAN FD
*  Supports CAN FD
*  t Scripting
*  t scripting
*  128 Filters
*  128 Filters


Line 474: Line 464:


==Memorator Professional HS/LS==
==Memorator Professional HS/LS==
Kvaser Memorator Professional HS/LS is a two-channel, high-performance, CAN bus interface and data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC using USB2.0. As a data logger, the Kvaser Memorator Professional is the perfect tool to capture irregular faults in the field or perform remote diagnosis. Advanced configuration features such as message filtering, triggers and error detection mode are made with a user-friendly configuration program (Kvaser’s Memorator Tools software) and stored on the flash disk.
Kvaser Memorator Professional HS/LS is a two-channel, high-performance, CAN bus interface and data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC using USB 2.0. As a data logger, the Kvaser Memorator Professional is the perfect tool to capture irregular faults in the field or perform remote diagnosis. Advanced configuration features such as message filtering, triggers and error detection mode are made with a user-friendly configuration program (Kvaser’s Memorator Tools software) and stored on the flash disk.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 493: Line 483:


==Memorator R SemiPro==
==Memorator R SemiPro==
Kvaser Memorator R SemiPro is a ruggedized, two-channel CAN bus interface and standalone data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC with USB2.0. The Memorator R SemiPro contains an advanced set of features: message filtering, triggers, error detection mode, battery backup, integrated SD card, Linx J1587 compatible, galvanic isolation and much more. Configurable using Kvaser's included Memorator Tools software.
Kvaser Memorator R SemiPro is a ruggedized, two-channel CAN bus interface and standalone data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC with USB 2.0. The Memorator R SemiPro contains an advanced set of features: message filtering, triggers, error detection mode, battery backup, integrated SD card, Linx J1587 compatible, galvanic isolation and much more. Configurable using Kvaser's included Memorator Tools software.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 524: Line 514:
|-style="vertical-align:middle;"
|-style="vertical-align:middle;"
|[[Image:KVASER 821-2.jpg|250px]]
|[[Image:KVASER 821-2.jpg|250px]]
|'''Memorator HS/HS'''
|'''Memorator 2xHS v2'''


|<br>'''KVASER 821-2'''
|<br>'''KVASER 821-2'''
<br>
<br>
*Replaces KVASER 175-6<br>
Replaces KVASER 175-6<br>
(EOL = 2018)<br>
(EOL = 2018)<br>


Line 537: Line 527:


==Memorator HS/SWC==
==Memorator HS/SWC==
Kvaser Memorator HS/SWC is a dual-channel, intermediate-performance, CAN bus interface and standalone data logger. This device has one CAN channel for High-Speed CAN and the second for Single-Wire CAN. In interface mode, it connects to a PC with USB1.1. As a data logger, Memorator makes for a perfect flight recorder due its compact design. Logging data goes to a standard SD card (supplied) or MMC disk. Triggers, filters, etc. can be set via our user-friendly configuration program and stored on the flash disk.
Kvaser Memorator HS/SWC is a dual-channel, intermediate-performance, CAN bus interface and standalone data logger. This device has one CAN channel for High-Speed CAN and the second for Single-Wire CAN. In interface mode, it connects to a PC with USB 1.1. As a data logger, Memorator makes for a perfect flight recorder due its compact design. Logging data goes to a standard SD card (supplied) or MMC disk. Triggers, filters, etc., can be set via our user-friendly configuration program and stored on the flash disk.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 558: Line 548:
Kvaser Memorator Professional 5xHS is a five-channel, high-performance CAN bus interface and standalone data logger that allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB.
Kvaser Memorator Professional 5xHS is a five-channel, high-performance CAN bus interface and standalone data logger that allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB.


Memorator Professional 5xHS offers advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD Card slot, galvanic isolation and much more. Configurable using Kvaser's Memorator Config Tool, it is also capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is supplied.
Memorator Professional 5xHS offers advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot, galvanic isolation and much more. Configurable using Kvaser's Memorator Config Tool, it is also capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is supplied.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 601: Line 591:
==Kvaser Mini PCI Express HS==
==Kvaser Mini PCI Express HS==


The Kvaser Mini PCI Express HS is a highly integrated CAN add-on board that lets embedded
The Kvaser Mini PCI Express HS is a highly integrated CAN add-on board that lets embedded system developers add CAN functionality to any standard computer board with Mini PCI Express capability. The add-on board offers a single-channel, high-speed CAN interface with error frame detection and on-board buffer. This board has a low-profile connector that complies with the Mini PCI Express standard, which connects via a cable to a D-SUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total system EMC performance is protected while all the electronics remain inside the computer housing.
system developers add CAN functionality to any standard computer board with mini PCI Express capability.
The add-on board offers a single-channel, high-speed CAN interface with error frame detection and on-board buffer.
This board has a low-profile connector that complies with the mini PCI Express standard, which connects via a cable to
a D-SUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total
system EMC performance is protected while all the electronics remain inside the computer housing.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 689: Line 674:
|}
|}


==Kvaser PCIEcan 2xHS v2==
<!-- ==Kvaser PCIEcan 2xHS v2==


Kvaser PCIEcan 2xHS v2 is a highly integrated, high-speed CAN card that adds two high-speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and is lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable.
Kvaser PCIEcan 2xHS v2 is a highly integrated, high-speed CAN card that adds two high-speed (ISO 11898-2 compliant) CAN channels to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and is lower profile than the Kvaser PCIEcan 2xHS and includes a DS9 to 2xDS9 splitter cable.


Offering silent mode, error frame detection and generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.
Offering silent mode, error frame detection and generation, and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 711: Line 696:
|'''[[Kvaser_Downloads#Kvaser_PCIEcan_2xHS_v2|Datasheet]]'''
|'''[[Kvaser_Downloads#Kvaser_PCIEcan_2xHS_v2|Datasheet]]'''
|}
|}
-->


==KVASER PCIEcan HS v2==
==KVASER PCIEcan HS v2==
Line 716: Line 702:
Kvaser PCIEcan HS v2 is a highly integrated, high-speed CAN card that adds a single high-speed (ISO 11898-2) CAN channel to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and is lower profile than the Kvaser PCIEcan HS.
Kvaser PCIEcan HS v2 is a highly integrated, high-speed CAN card that adds a single high-speed (ISO 11898-2) CAN channel to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and is lower profile than the Kvaser PCIEcan HS.


Offering silent mode, error frame detection and generation and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.
Offering silent mode, error frame detection and generation, and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 739: Line 725:
==T-Cannector v2==
==T-Cannector v2==


Kvaser T-Cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Offering an adjustable CAN termination resistor (120/60/0 Ohm) it provides an affordable and safe way of terminating the CAN circuit when using Kvaser interfaces on a development board, as well as powering interface devices, such as Kvaser’s Blackbird and Memorator series, without internal power.
Kvaser T-Cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Offering an adjustable CAN termination resistor (120/60/0Ω) it provides an affordable and safe way of terminating the CAN circuit when using Kvaser interfaces on a development board, as well as powering interface devices, such as Kvaser’s Blackbird and Memorator series, without internal power.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 757: Line 743:
|}
|}


==D-SUB 9-Pin 120ohm Termination Adapter==
==D-SUB 9-Pin 120Ω Termination Adapter==


Kvaser D-SUB 9-pin 120 Ohm termination adapter is a CAN adapter with a 9-pin male D-SUB connector at one end and a 9-pin female D-SUB socket at the other. Between CAN High (pin 7) and CAN Low (pin 2), there is a built-in 120 Ohm CAN terminating resistor.
Kvaser D-SUB 9-pin 120Ω termination adapter is a CAN adapter with a 9-pin male D-SUB connector at one end and a 9-pin female D-SUB socket at the other. Between CAN High (pin 7) and CAN Low (pin 2), there is a built-in 120Ω CAN terminating resistor.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 777: Line 763:
|}
|}


==Q-Cable 0.3m==
==Q-Cable 0.3 m==


The 0.3m Q-Cable is a 0.3m (approx. 0.98 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus.
The 0.3 m Q-Cable is a 0.3 m (approx. 0.98 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 797: Line 783:
|}
|}


==Q-Cable 3m==
==Q-Cable 3 m==


The 3m Q-Cable is a 3m (approx. 9.8ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus. This variant helps to protect people and equipment from toxic and corrosive gases by emitting limited smoke and no halogen when exposed to high heat sources.
The 3 m Q-Cable is a 3 m (approx. 9.8 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus. This variant helps to protect people and equipment from toxic and corrosive gases by emitting limited smoke and no halogens when exposed to high heat sources.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 830: Line 816:
|-style="vertical-align:middle;"
|-style="vertical-align:middle;"
|[[Image:Kvaser_OBDII_to_Dsub9_Adapter_Cable.jpg|250px]]
|[[Image:Kvaser_OBDII_to_Dsub9_Adapter_Cable.jpg|250px]]
|'''OBDII to Dsub9 Adapter Cable'''
|'''OBDII to D-SUB9 Adapter Cable'''
|KVASER 723-9
|KVASER 723-9
|'''Please contact [mailto:sales@neweagle.net sales]'''
|'''Please contact [mailto:sales@neweagle.net sales]'''
Line 837: Line 823:


==OBDII Extension Cable 2.5m==
==OBDII Extension Cable 2.5m==
Kvaser's OBDII Extension Cable is a highly durable extension cable of 2.5 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.
Kvaser's OBDII Extension Cable is a highly durable extension cable 2.5 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 849: Line 835:
|-style="vertical-align:middle;"
|-style="vertical-align:middle;"
|[[Image:Kvaser_OBDII_Extension_Cable_2.5m.jpg|250px]]
|[[Image:Kvaser_OBDII_Extension_Cable_2.5m.jpg|250px]]
|'''OBDII Entension Cable 2.5m'''
|'''OBDII Extension Cable 2.5m'''
|KVASER 347-7
|KVASER 347-7
|'''Please contact [mailto:sales@neweagle.net sales]'''
|'''Please contact [mailto:sales@neweagle.net sales]'''
Line 875: Line 861:


==OBDII Extension Cable 10m==
==OBDII Extension Cable 10m==
Kvaser's OBDII Extension Cable is a highly durable extension cable of 10 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.
Kvaser's OBDII Extension Cable is a highly durable extension cable 10 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 894: Line 880:


==OBDII Extension Cable 15m==
==OBDII Extension Cable 15m==
Kvaser's OBDII Extension Cable is a highly durable extension cable of 15 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.
Kvaser's OBDII Extension Cable is a highly durable extension cable 15 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.


{| class="wikitable" style="text-align: center;" cellpadding = "5"  
{| class="wikitable" style="text-align: center;" cellpadding = "5"  
Line 1,011: Line 997:
|'''Linx J1587'''
|'''Linx J1587'''
|KVASER 389-7
|KVASER 389-7
|Please contact [mailto:sales@neweagle.net sales].
|Please contact [mailto:sales@neweagle.net sales]


|-style="vertical-align:middle;"
|-style="vertical-align:middle;"
Line 1,017: Line 1,003:
|'''OEM Leaf'''
|'''OEM Leaf'''
|KVASER OEM Leaf
|KVASER OEM Leaf
|Please contact [mailto:sales@neweagle.net sales].
|Please contact [mailto:sales@neweagle.net sales]
 
|-style="vertical-align:middle;"
|[[Image:Kvaser 861-8.jpg|250px]]
|'''PCIEcan 2xHS v2'''
|KVASER 861-8
|Please contact [mailto:sales@neweagle.net sales]
|}
|}


Latest revision as of 14:19, 23 February 2023

Kvaser develops interfaces and data loggers for any flavor of CAN (controller area network) and CAN-related buses to meet customer system requirements. The Kvaser USB to CAN devices are the approved products of MotoHawk. Kvaser tools are easy to use, accurate and state-of-the-art. Rigorous quality assurance and control processes for both hardware and software ensure that Kvaser delivers a user-friendly and up-to-date tool. Kvaser products are recommended for use with MotoHawk applications because they are all compatible, whereas other tools are not guaranteed to be compatible. Kvaser products are also very cost-effective. The Kvaser USB to CAN cables are compatible with USB 3.0 ports, but not with USB 1.0 or eSATA ports.


Kvaser's hardware interfaces can be used throughout the product cycle for development, simulation, testing and other maintenance of CAN networks and related hardware. All Kvaser hardware is designed to perform at their optimum in industrial or automotive temperature ranges, while some is specifically ruggedized to endure the most hostile of environments.

Single Channel Kvasers


* = Contact sales to purchase.

New Eagle High-Speed USB to CAN

The New Eagle Branded HIGH-SPEED USB TO CAN INTERFACE represents one of the easiest and lowest-cost methods of connecting a computer to a CAN bus network. With its USB 2.0 compliant connector and 9-pin D-SUB connector, the sleek, ergonomically designed housing is both robust enough for everyday use and small and flexible enough to be used in space-constrained applications. Galvanic isolation is now standard.

Equivalent Kvaser Part Number: Kvaser 685-0

Picture Product Name Part Number Webstore Downloads
New Eagle High-Speed

USB to CAN Interface

with Galvanic Isolation

 NE-USB-CAN-001 Purchase Datasheet

Leaf Light HS v2 J1939-13 TYPE II

The Leaf Light HS v2 J1939-13 TYPE II provides a simple way of connecting a PC with the on-board computer of any J1939-compliant commercial vehicle for diagnostic purposes by means of its USB 2.0 connector and a 9-pin J1939-13 compliant CAN connector. Having made its name as the workhorse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low-cost tools for connecting any CAN network to a PC or mobile computer in marine applications and beyond.

Picture Product Name Part Number Webstore Downloads
Leaf Light HS v2 J1939-13 KVASER 915-8 Purchase Datasheet

BlackBird v2

Kvaser BlackBird v2 is a high-performance wireless (WLAN) communication link for the High Speed CAN bus. More powerful and versatile a WLAN solution than Kvaser's original BlackBird, Kvaser BlackBird v2 incorporates a new radio chip with up to 75% better range. More onboard memory overcomes potential interruptions to the wireless connection due to the protocol itself or disturbance. The BlackBird v2's ability to leverage existing wireless infrastructure makes it ideal for replacing cumbersome cable, accessing hard-to-reach CAN networks or for monitoring a CAN bus while in motion. Based on a radio chip that is Wi-Fi certified and meets CE and FCC standards, it works in both Ad Hoc and Infrastructure mode. The Blackbird v2's API is “device agnostic” and can be used on a tablet, smartphone or PC.

Picture Product Name Part Number Webstore Downloads
BlackBird v2 KVASER 671-3 Purchase Datasheet

Ethercan Light HS

The Kvaser Ethercan Light HS CAN to Ethernet interface facilitates the adoption of the Internet of Things (IoT) concept within modern manufacturing environments by enabling data from any CAN product or system to be accessed over the Internet via an Ethernet-equipped PC.

Picture Product Name Part Number Webstore Downloads
Ethercan Light HS KVASER 713-0 Please contact sales Datasheet

Leaf Light HS v2 CB

The Leaf Light v2 CB is the bare circuit board version of Kvaser's popular Leaf Light v2 interface - a single-channel, high speed, USB to CAN bus interface. Having made its name as the workhorse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low-cost connection to the PC.

Picture Product Name Part Number Webstore Downloads
Leaf Light HS v2 CB KVASER 733-8 Please contact sales Datasheet

Leaf Light HS v2 OBDII

The Leaf Light v2 OBDII provides a simple way of connecting a PC with a vehicle’s on-board computer by means of USB 2.0 connector and a 16-pin OBDII-compliant CAN connector. Having made its name as the workhorse of USB to CAN interfaces, Kvaser's Leaf Light product series provides reliable, low-cost tools for connecting any CAN network to a PC or mobile computer in vehicle diagnostic applications and beyond.

Picture Product Name Part Number Webstore Downloads
Leaf Light HS v2 OBDII KVASER 732-1 Purchase Datasheet

Leaf Light HS v2 M12

The Leaf Light HS v2 M12 is the marine version of Kvaser’s popular Leaf Light v2 interface. This device provides a simple way of connecting a PC with the on-board computer of a marine electronics system by means of its standard USB 2.0 connector and a 5-pin National Marine Electronics Association (NMEA) approved CAN connector. The Leaf Light HS v2 M12 is ideal for diagnosing NMEA 2000 bus issues, configuring and flashing NMEA 2000 bus nodes, monitoring NMEA 2000 bus traffic and load conditions, and stimulating or emulating NMEA 2000 nodes.

Picture Product Name Part Number Webstore Downloads
Leaf Light HS v2 M12 KVASER 881-6 Purchase Datasheet

Leaf Pro HS v2

Kvaser Leaf Pro HS v2 is an evolution of the Leaf family that brings programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customisation using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a standard 9-pin D-SUB; bus is also available with a 16-pin OBDII connector. Please see Kvaser Leaf Pro HS v2 OBDII for details.

Picture Product Name Part Number Webstore Downloads
Leaf Pro HS v2 KVASER 843-4 Purchase Datasheet

Leaf Pro HS v2 OBDII

Kvaser Leaf Pro HS v2 OBDII is an evolution of the Leaf family that bring programmability and CAN with Flexible Data-Rate (CAN FD) to users' fingertips. Kvaser’s Pro versions boast a high transmit capability that meets the needs of CAN FD frames. It also supports customization using Kvaser’s t programming language. For example, users can run a t program to speed up file transfer protocols or to emulate ECUs and other devices by generating traffic and handling protocols. This model has a 16-pin OBDII connector, but a version with a standard 9-pin D-SUB is also available. Please see Kvaser Leaf Pro HS v2 for details.

Picture Product Name Part Number Webstore Downloads
Leaf Pro HS v2 OBDII KVASER 849-6 Please contact sales Datasheet

Leaf Professional Rugged HS

Kvaser Leaf Professional Rugged is a one channel, very high-performance, USB interface for CAN. With an IP65-rated aluminum housing, it offers the ability to easily connect your PC and CAN bus network. It includes Kvaser's patented MagiSync feature for synchronized timestamping and galvanic isolation for protection against voltage spikes.

Picture Product Name Part Number Webstore Downloads
Leaf Professional Rugged HS KVASER 509-9 Purchase Datasheet

Leaf Professional LS

Kvaser Leaf Professional is a one channel, high-performance, USB interface for Low-Speed CAN. A versatile and powerful interface that offers easy connection between your PC and CAN bus network, it includes Kvaser's patented MagiSync feature for synchronized timestamping, galvanic isolation for protection against voltage spikes and Auto-Transmit for placing messages on the bus at set intervals.

Picture Product Name Part Number Webstore Downloads
Leaf Professional LS KVASER 261-6 Please contact sales Datasheet

Leaf Professional SWC

Kvaser Leaf Professional is a one channel, high-performance, USB interface for Single-Wire CAN. A versatile and powerful interface that offers easy connection between your PC and CAN bus network, it includes Kvaser's patented MagiSync feature for synchronized timestamping, galvanic isolation for protection against voltage spikes and Auto-Transmit for placing messages on the bus at set intervals.

Picture Product Name Part Number Webstore Downloads
Leaf Professional SWC KVASER 264-7 Please contact sales Datasheet

Leaf Professional LIN

Picture Product Name Part Number Webstore Downloads
Leaf Professional LIN KVASER 269-2 Purchase Datasheet

Memorator Light HS

Designed for troubleshooting any CAN-based system, the Kvaser Memorator Light HS is an easy-to-use tool for logging serial data with no pre-configuration or software setup required. With an autobaud function that determines CAN bus bit rate, the Kvaser Memorator Light can be attached to any high-speed CAN bus without configuration. All CAN bus traffic is logged in a circular buffer, overwriting the oldest data when the buffer becomes full. A separate circular buffer keeps track of error frame conditions and the message traffic that occurs near the conditions.

Picture Product Name Part Number Webstore Downloads
Memorator Light HS KVASER 513-6 Purchase Datasheet

CAN/CAN FD to USB

The Kvaser U100 is a small, yet powerful, CAN to USB interface. It provides real-time transmission and reception of standard and extended CAN messages on the bus with high timestamp precision and is compatible with applications that use Kvaser's CANlib.

Picture Product Name Part Number Webstore Downloads
CAN/CAN FD to USB KVASER U100 Purchase Datasheet

Multi Channel Kvasers


* = Contact sales to purchase.

Kvaser USBcan Light 2xHS

The Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective means of connecting two high-speed CAN buses to a PC or mobile computer. With a USB 2.0 compliant connector at one end and two 9-pin D-SUB connectors at the other, the Kvaser USBcan Light 2xHS is slightly larger than the one-channel Leaf Light v2 but features the same sleek, ergonomically designed housing that Kvaser products have become renowned for. Galvanic isolation is standard on this device.

Picture Product Name Part Number Webstore Downloads
USBcan Light 2xHS KVASER 714-7 Purchase Datasheet

USBcan Light 4xHS

The USBcan Light 4xHS is a compact, reliable and cost-effective means of connecting four high-speed CAN buses to a PC or mobile computer. With galvanic isolation as standard, this USB to quad-channel CAN interface has a standard USB connector at one end and four high-speed CAN channels in a single 26-pin HD D-SUB CAN connector at the other. The supplied HD26-4xDS9 splitter can be used to connect to four separate 9-pin D-SUB connectors.

Picture Product Name Part Number Webstore Downloads
USBcan Light 4xHS KVASER 831-1 Purchase Datasheet

USBcan Professional 2xHS v2

The USBcan Pro 2xHS v2 is a USB to dual-channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high-speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.

Picture Product Name Part Number Webstore Downloads
USBcan Professional 2xHS v2 KVASER 752-9 Purchase Datasheet

USBcan Professional RJ45

The Kvaser USBcan Professional RJ45 is a high-performance, two-channel CAN bus interface. A standard USB 1.1 connection enables several interfaces to be easily connected to a PC. Standard RJ45 connectors allow the user to connect to the CAN bus via ethernet port.

Picture Product Name Part Number Webstore Downloads
USBcan Professional RJ45 KVASER 413-9 Please contact sales Datasheet

USBcan Professional 5xHS

Kvaser USBcan Pro 5xHS is a five-channel, high-performance, CAN bus interface that provides a quick and flexible way to connect your PC to multiple CAN buses, in real-time. With all channels configured for High-Speed CAN (ISO 11898-2), the Kvaser USBcan Pro 5xHS handles transmission and reception of standard and extended CAN messages on the bus with high timestamp precision. This device is CAN FD ready.

Picture Product Name Part Number Webstore Downloads
USBcan Professional 5xHS KVASER 779-6 Purchase Datasheet

USBcan R v2

The Kvaser USBcan R is a robust, easy-to-carry device designed for high-end applications. Two CAN channels provide quick reaction times and high data throughput. The Kvaser USBcan R is perfect for rapid ECU reflashing, advanced bus analyzers and efficient development work.

Picture Product Name Part Number Webstore Downloads
USBcan R v2 KVASER 920-2

(replaces the 579-2)

Purchase Datasheet

Memorator Professional 2xHS v2

Kvaser Memorator Pro 2xHS v2 is a professional-level, dual-channel CAN bus interface and standalone data logger offering advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot up to 64G, and galvanic isolation. Connected to a PC with USB 1.1, the Kvaser Memorator Pro 2xHS v2 operates as a powerful real-time CAN to USB interface, whilst in data logger mode, the compact design of this device makes for the perfect flight recorder. Configurable using Kvaser's Memorator Config Tool, this device is capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is provided. The Kvaser Memorator Pro 2xHS v2 is CAN FD compliant.

Additional Features:

  • Supports CAN FD
  • t scripting
  • 128 Filters
Picture Product Name Part Number Webstore Downloads
Memorator Pro 2xHS v2 KVASER 819-9 Purchase Datasheet

Memorator Professional HS/LS

Kvaser Memorator Professional HS/LS is a two-channel, high-performance, CAN bus interface and data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC using USB 2.0. As a data logger, the Kvaser Memorator Professional is the perfect tool to capture irregular faults in the field or perform remote diagnosis. Advanced configuration features such as message filtering, triggers and error detection mode are made with a user-friendly configuration program (Kvaser’s Memorator Tools software) and stored on the flash disk.

Picture Product Name Part Number Webstore Downloads
Memorator Professional HS/LS KVASER 417-7 Purchase Datasheet

Memorator R SemiPro

Kvaser Memorator R SemiPro is a ruggedized, two-channel CAN bus interface and standalone data logger. Standalone mode logs data to an expandable SD card slot; interface mode connects to the PC with USB 2.0. The Memorator R SemiPro contains an advanced set of features: message filtering, triggers, error detection mode, battery backup, integrated SD card, Linx J1587 compatible, galvanic isolation and much more. Configurable using Kvaser's included Memorator Tools software.

Picture Product Name Part Number Webstore Downloads
Memorator R SemiPro KVASER 490-0 Purchase Datasheet

Memorator 2xHS v2

The Kvaser Memorator 2xHS v2 is a compact, dual-channel CAN bus interface and standalone data logger that allows users to monitor and collect data from two high-speed CAN channels simultaneously. Standalone mode logs data to an SD card; interface mode provides a real-time connection between the CAN network and a PC via USB.

Picture Product Name Part Number Webstore Downloads
Memorator 2xHS v2
KVASER 821-2


Replaces KVASER 175-6
(EOL = 2018)


 Purchase Datasheet

Memorator HS/SWC

Kvaser Memorator HS/SWC is a dual-channel, intermediate-performance, CAN bus interface and standalone data logger. This device has one CAN channel for High-Speed CAN and the second for Single-Wire CAN. In interface mode, it connects to a PC with USB 1.1. As a data logger, Memorator makes for a perfect flight recorder due its compact design. Logging data goes to a standard SD card (supplied) or MMC disk. Triggers, filters, etc., can be set via our user-friendly configuration program and stored on the flash disk.

Picture Product Name Part Number Webstore Downloads
Memorator HS/SWC KVASER 234-0 Please contact sales Datasheet

Memorator Professional 5xHS

Kvaser Memorator Professional 5xHS is a five-channel, high-performance CAN bus interface and standalone data logger that allows users to monitor and collect data from up to five CAN channels using just one device. Standalone mode logs data to an SD card; interface mode connects to the PC via USB.

Memorator Professional 5xHS offers advanced features such as message filtering, triggers, error detection and generation, silent mode, an expandable SD card slot, galvanic isolation and much more. Configurable using Kvaser's Memorator Config Tool, it is also capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is supplied.

Picture Product Name Part Number Webstore Downloads
Memorator Professional 5xHS KVASER 778-9 Purchase Datasheet

Memorator Professional 5xHS CB

Kvaser Memorator Professional 5xHS CB is a five-channel, high-performance, CAN bus interface and standalone data logger that allows users to monitor and collect data from up to five CAN channels using just one device. It is supplied "bare board" i.e. without housing and can thus be built into any system. The Memorator Professional 5xHS CB is CAN FD-ready.

Configurable using Kvaser's Memorator Config Tool, Memorator Professional 5xHS CB is capable of running user-developed scripts written in the Kvaser t programming language. Guidance in creating t programs is supplied. The device is also supported in CANlib, Kvaser’s universal software development kit.

Picture Product Name Part Number Webstore Downloads
Memorator Professional 5xHS CB KVASER 832-8 Please contact sales Datasheet

PCI Kvasers

Kvaser Mini PCI Express HS

The Kvaser Mini PCI Express HS is a highly integrated CAN add-on board that lets embedded system developers add CAN functionality to any standard computer board with Mini PCI Express capability. The add-on board offers a single-channel, high-speed CAN interface with error frame detection and on-board buffer. This board has a low-profile connector that complies with the Mini PCI Express standard, which connects via a cable to a D-SUB connector (or other type) at the computer housing. With just the CAN communication link itself exposed, total system EMC performance is protected while all the electronics remain inside the computer housing.

Picture Product Name Part Number Webstore Downloads
Mini PCI Express HS KVASER 688-1 Purchase Datasheet

Kvaser Mini PCI Express 2xHS

Offering silent mode, error frame detection and an on-board buffer, this small-form factor board fits any embedded data acquisition system, but is particularly suitable for fleet management to monitor key parameters such as fuel economy, engine speed, braking and accelerator pressure, and gearshift patterns.

Picture Product Name Part Number Webstore Downloads
Mini PCI Express 2xHS KVASER 743-7 Purchase Datasheet

Kvaser PCIEcan 4xHS

Kvaser PCIEcan 4xHS is a highly integrated, high-speed CAN card that adds four high-speed CAN network channels to any standard computer board with PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, this small-form factor add-on board fits many embedded data acquisition systems and supports CAN FD.

Picture Product Name Part Number Webstore Downloads
PCIEcan 4xHS KVASER 683-6 Purchase Datasheet

Kvaser PCIcanx HS/HS

Kvaser PCIcanx HS/HS is a dual-channel, high-speed CAN interface that can be used in both regular PCI and PCI-X slots. A galvanically isolated CAN bus driver protects the hardware. The onboard CAN controller is I/O mapped for quick reaction times.

Picture Product Name Part Number Webstore Downloads
PCIcanx HS/HS KVASER 331-6 Purchase Datasheet


KVASER PCIEcan HS v2

Kvaser PCIEcan HS v2 is a highly integrated, high-speed CAN card that adds a single high-speed (ISO 11898-2) CAN channel to any standard computer board with PCI Express capability. At 86 x 69 mm, this has a smaller form factor and is lower profile than the Kvaser PCIEcan HS.

Offering silent mode, error frame detection and generation, and an on-board buffer, this add-on board fits many embedded data acquisition systems and is CAN FD compliant.

Picture Product Name Part Number Webstore Downloads
PCIEcan HS v2 KVASER 866-3

(replaces the 425-2)

Purchase Datasheet

Interface Accessories

T-Cannector v2

Kvaser T-Cannector v2 is a CAN bus hub with three female and one male D-SUB9 connectors. Offering an adjustable CAN termination resistor (120/60/0Ω) it provides an affordable and safe way of terminating the CAN circuit when using Kvaser interfaces on a development board, as well as powering interface devices, such as Kvaser’s Blackbird and Memorator series, without internal power.

Picture Product Name Part Number Webstore Downloads
T-Cannector v2 KVASER 776-5 Please contact sales Datasheet

D-SUB 9-Pin 120Ω Termination Adapter

Kvaser D-SUB 9-pin 120Ω termination adapter is a CAN adapter with a 9-pin male D-SUB connector at one end and a 9-pin female D-SUB socket at the other. Between CAN High (pin 7) and CAN Low (pin 2), there is a built-in 120Ω CAN terminating resistor.

Picture Product Name Part Number Webstore Downloads
D-SUB 9-Pin 120 ohm Termination Adapter KVASER 801-4 Purchase Datasheet

Q-Cable 0.3 m

The 0.3 m Q-Cable is a 0.3 m (approx. 0.98 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus.

Picture Product Name Part Number Webstore Downloads
Q-Cable 0.3m KVASER 199-2 Please contact sales Datasheet

Q-Cable 3 m

The 3 m Q-Cable is a 3 m (approx. 9.8 ft) long adapter cable for the Kvaser PCIcanx 4xHS and Kvaser PCIcan 4xHS boards. One D-SUB male connector connects to the PCIcan board, whilst four D-SUB male connectors connect to the CAN bus. This variant helps to protect people and equipment from toxic and corrosive gases by emitting limited smoke and no halogens when exposed to high heat sources.

Picture Product Name Part Number Webstore Downloads
Q-Cable 3m KVASER 340-8 Please contact sales Datasheet

OBDII to D-SUB9 Adapter Cable

A Kvaser OBDII Adapter Cable connects any Kvaser CAN bus interface with a D-SUB9 female connector to any vehicle with an OBDII (J1962) connector.

Picture Product Name Part Number Webstore Downloads
OBDII to D-SUB9 Adapter Cable KVASER 723-9 Please contact sales Datasheet

OBDII Extension Cable 2.5m

Kvaser's OBDII Extension Cable is a highly durable extension cable 2.5 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture Product Name Part Number Webstore Downloads
OBDII Extension Cable 2.5m KVASER 347-7 Please contact sales Datasheet

OBDII Extension Cable 5m

Kvaser's OBDII Extension Cable is a highly durable extension cable five meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture Product Name Part Number Webstore Downloads
OBDII Entension Cable 5m KVASER 301-9 Please contact sales Datasheet

OBDII Extension Cable 10m

Kvaser's OBDII Extension Cable is a highly durable extension cable 10 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture Product Name Part Number Webstore Downloads
OBDII Extension Cable 10m KVASER 348-4 Please contact sales Datasheet

OBDII Extension Cable 15m

Kvaser's OBDII Extension Cable is a highly durable extension cable 15 meters in length with male to female OBDII connectors. The cable is made of high-quality thermoplastic rubber to ensure excellent flexibility and resilience. All the pins are connected.

Picture Product Name Part Number Webstore Downloads
OBDII Extension Cable 15m KVASER 349-1 Please contact sales Datasheet

Discontinued/End of Life Products

The following are not being manufactured currently. If you would like to check on remaining stock that might be available, please contact sales.

Picture Product Name Part Number Replacement
Kvaser Leaf Light Rugged HS KVASER 427-6
 KVASER 921-9
Kvaser Leaf Light HS v2 J1939-13 KVASER 787-1 KVASER 915-8
Kvaser USBcan II HS/HS KVASER 159-6 KVASER 714-7
Kvaser Leaf Light HS KVASER 241-8 KVASER 685-0
Kvaser Leaf Light GI KVASER 411-5 KVASER 685-0
Kvaser Leaf Light With J1939-13 Connector KVASER 642-3 KVASER 787-1 => Kvaser 915-8
Kvaser Leaf Professional HS KVASER 243-2 KVASER 843-4
Kvaser Memorator Professional HS/HS KVASER 351-4 KVASER 819-9
USBcan Professional HS/HS KVASER 357-6 KVASER 752-9
BlackBird SemiPro HS KVASER 441-2 KVASER 671-3
BlackBird SemiPro HS/HS KVASER 453-5 KVASER 671-3
Eagle KVASER 567-9 KVASER 819-9
USBcan R KVASER 579-2 KVASER 920-2
Leaf Light HS v2 KVASER 685-0 NE-USB-CAN-001
Linx J1587 KVASER 389-7 Please contact sales
OEM Leaf KVASER OEM Leaf Please contact sales
PCIEcan 2xHS v2 KVASER 861-8 Please contact sales

Kvaser Software

Kvaser offers third-party software for analysis, simulation, calibration, debugging and more. Developers can download software and start developing around any Kvaser interface right away.

CANKing

CANKing is a CAN bus monitor and general-purpose diagnostic tool. It is especially suited for interactive development work. CAN messages can be easily sent and the corresponding impact on the target module observed. To use CANKing, it is necessary to purchase one of our CAN interfaces such as the Kvaser Leaf USB to CAN converters. It is a free software that comes with the Kvaser product. This product allows the user to see all CAN messages on the bus in either decimal or hexadecimal form. It also allows the user to send out simple test messages.

Raptor-CAN

Raptor-CAN is an easy-to-use CAN data analysis PC tool. It helps test and verify real-time CAN systems. Key features include the ability to monitor and control CAN messaging, and to store and replay CAN traffic. Click here to learn more!

Kvaser Database Editor

Kvaser offers a DBC File creator/editor which can be downloaded from here: Kvaser DBC Editor Download

Contact Us

For questions or more information, please contact sales@neweagle.net

Retrieved from "https://wiki.neweagle.net//index.php?title=Kvaser&oldid=31921"