Raptor-Cal-Release-Notes: Difference between revisions

Latest revision as of 13:10, 24 June 2024

New Eagle > Products Wiki > Raptor Platform > Raptor-Cal > Raptor Cal Release Notes

Below is a list of all Raptor-Cal versions and their change logs, beginning with the most recent version.

Release 2024a_1.0.13734

Highlights

Significant performance enhancements:
- Strip Chart
- Flashing GCM-196
- Opening Displays/Calibrations
Display Grid Interactions:
- Can now paste plaintext directly into signal value cells
- Pressing the Tab key while editing a cell will now commit the edit and move to the next cell
- Pressing the Backspace key while selecting a signal value will now enter the cell to edit and remove the current cell value
Added ability to begin data logging as soon as a display opens
Added ability to select all display grid cells simultaneously (Ctrl-A within a display)
Added new data logging format (under settings as Simulink logging format)
Added descriptions for reflash failure reasons
Recovery Baud Rate of selected module now automatically selected when recovery is initiated
Patched bug occurring where application would freeze when a module attempts to reconnect
Various bug fixes/improvements

Details

CAL-1416 Investigate the 'Verification/Shutting Down' portion of the RCM-112 reflash procedure
CAL-1421 Chart doesn't use the decimal precision defined in the RPG
CAL-1423 Change the Strip Chart to re-draw the selected signal to be on top of same-value signals once it is selected
CAL-1445 Error msg when .config file cannot be read/is corrupted needs to be a little more descriptive
CAL-1450 Recent File's Modules is not removed upon all displays associated with that module being removed
CAL-1451 Ability to start logging when disconnected
CAL-1455 "Select all cells" feature
CAL-1477 Refactor CalEdit(Non)ScalarVM/CalEditorViewService classes
CAL-1534 You are able to open multiple instances of the License Viewer within Raptor-Cal
CAL-1538 Raptor Cal installer should error out if uninstaller fails to run
CAL-1541 Refactor KvaserCANLib into a Service so that KvaserCANChannel/KvaserCanAdapter can be tested
CAL-1546 Add 'IsUDSRecovery' flag to ModuleInfoEx; Omit recovery modules from tool address search during flash selection
CAL-1558 Strip Chart updates Y-Axis based on current DAQ value while paused
CAL-1561 StripChart sometimes does not start charting when connecting to an offline display with multiple tabs
CAL-1570 Store more than 10 recent displays
CAL-1574 [UI Testing] Ensure DAQ View is present before running DAQ related Display Tests
CAL-1580 Refactor StripChart within Merlin.UI into appropriate file structure
CAL-1581 After having replayed a log in Raptor-Cal, Raptor-Cal maintains control of that log even after the replay feature is exited
CAL-1584 Extract 'SignalsGrid' within StripPlot to its own VM
CAL-1585 Two Error Message Boxes appear when replaying a log that is already open in Excel
CAL-1586 Convert Plot to MVVM
CAL-1587 Strip Chart 'Cursor Point' can be moved off of the chart
CAL-1592 Calibrations are included in drop package from Signal Tree when 'Calibrations' Toggle is turned off
CAL-1593 Refactor GetHelpDoc within Raptor-Cal.Common into a Service
CAL-1597 Long delay occurring when opening a calibration table for the first time in a display session with a large application
CAL-1598 Status Bar not reset when exiting out of Fix Connect Menu without selecting a package
CAL-1599 Lock/Grey-Out screen, show loading cursor when switching connection in a display file
CAL-1600 Pressing 'Tab' after an edit will not select the next cell, typing a value edits the previous cell
CAL-1602 Create a better method of storing Chart Signal info for the StripChart
CAL-1603 Remove Saving/Loading Chart Settings to Local Application Data
CAL-1604 Introduce tasking within the GCM196 reflash procedure to reduce time/memory consumed
CAL-1605 Add default recovery module to settings
CAL-1607 Deadlock occurring when switching display tabs when module is attempting to re-connect
CAL-1608 Indicate interpolations when replaying Chart Log when signals were logged at different rates
CAL-1610 Re-arrange Merlin.UI/Merlin.UI.UnitTests external repos into the same sub-directory
CAL-1611 ArgumentNullException within NE.Common's UndoCommandService if scope is null
CAL-1612 Add Microsoft.Xaml.Behaviors to Installer Staging folder
CAL-1614 Improve performance loading Online/Offline displays; Switching between Online/Offline
CAL-1617 Refactor StripPlot control to MVVM
CAL-1619 Add back the ability to copy-paste values from Excel into a display grid
CAL-1620 Integer/DoubleTextBox does not support negative ('-') input
CAL-1621 Crash occurring if user settings file is manually edited while Raptor-Cal/Service is running and the tool is closed
CAL-1622 Status Bar displays "Attempting to reconnect..." after opening online display, switching to offline, and then closing the display
CAL-1627 Ignore module response to final ECU Reset command sent during reflash
CAL-1629 Handle retries for Build Checksum XCP command
CAL-1630 Add error handling to dialog close event method to prevent crash
CAL-1631 Auto-Switch baud rate when initiating recovery
CAL-1632 Change Recovery Screen
CAL-1633 Add way to reset auto scaling in the strip chart
CAL-1635 Add command that sets a viewable scale for each signal on the chart.
CAL-1636 Create Simulink supported playback format for csv file
CAL-1657 Add support for M2-502 module (GCM56)
CAL-1661 Add service and negative response descriptions to reflash error message
CAL-1664 Add option to create desktop shortcut for Cal/Service
CAL-1665 Crash occurring when opening a backup display file
CAL-1666 RP1210 Can Status remains after physically disconnecting
CAL-1671 Enable GCM-196 recovery screen for ECM-196
CAL-1673 Change Cal/Service build configuration to target Any CPU and to not prefer 32 bit
CAL-1676 Update NewEagleLicensing.exe to 24.2 in Installer
CAL-1677 Fix edge cases that can occur during a sequential test run
CAL-1678 Fix Connect Dialog is currently broken
CAL-1681 Change 'New Eagle Products, Inc.' to 'New Eagle LLC'
CAL-1596 Module Container remains in Signals View after workspace is closed if a Calibration Table is opened during the session
CAL-1634 Display Grid headers jump to beginning when committing an edit and they are scrolled to the right/down
CAL-1638 Issues removing from DAQ when signals are in multiple locations
CAL-1639 Leftover objects after deleting an Enum type signal from a display grid
CAL-1648 Crash occurring when navigating grid tabs using arrow keys and holding down shift
CAL-1649 Non-Scalar Calibration Dialog can be of infinite width
CAL-1672 Offline calibrations not being added to list of connected modules, leading to signal lookup issues

Release 2023b_2.0.13564

Highlights

Built-In CAN Logging feature
- Can enable in upper Toolbar, or during an individual flash attempt by enabling 'Log CAN' in Flash menu
'After-Flash' feature added to Flash Menu
- Can quickly open or create a new display using the newly flashed connected module
Improved flashing speeds for the following modules:
- RCM-80-2304
- M47
- GCM-111
Various bug fixes/improvements

Details

CAL-1402 Change behavior of the 'Backspace' key in a display
CAL-1405 Add ability to log CAN Traffic within Raptor-Cal into a text file
CAL-1406 With 'Enable Kvaser Virtual' turned on, found module appeared twice during discovery
CAL-1408 Allow Raptor-Cal to accept RPGs with no defined DAQ lists
CAL-1410 Exception occurring due to Two-Way binding on read-only variable in Reflash Dialog
CAL-1413 Fix/Change Logic of Recent Displays feature
CAL-1414 Upper toolbar options not greyed out when unable to be performed
CAL-1429 Crash when connecting to a module whose running application's XCP def has 0 ms defined in the DAQ Rates vector
CAL-1432 Add support for NED custom reflash functions via RIL
CAL-1434 Hide Settings if the user does not have appropriate licensing
CAL-1435 Add NewEagleLicensing v.24.1 to Raptor-Cal installer
CAL-1436 Update Newtonsoft.Json Nuget Package
CAL-1438 Turn on DPI Awareness in Installers so high-res screens aren't blurry
CAL-1442 Add Import/Export Calibrations to the toolbar
CAL-1443 Datalog button does not change immediately after a disconnection/connection
CAL-1447 Improper use of semaphore within DataDictionary
CAL-1448 Allow ability to quickly turn on the 'Enable Kvaser Virtual' setting from discovery dialogs
CAL-1449 Add 'Delete Selection' option to right-click options
CAL-1454 Add 'Open Most Recent Display' option to the Open Display Reflash feature
CAL-1457 Datalogging is allowed without a license
CAL-1463 Raptor Cal doesn't detect duplicate ECUs very well during flash
CAL-1466 Raptor-Cal crash on startup due to corrupted License Viewer/failed install of licensing
CAL-1490 Expand 'Export Calibrations' to be able to export to a .csv format
CAL-1519 Add error message for if a RCM-80 2203 RPG is flashed onto a 2304, and vice versa
CAL-1521 Display Column/Row Headers don't quite line up with cells
CAL-1531 Expand the 'Connect' feature within the Flash Dialog to be able to open an existing display after a re-flash
CAL-1547 Add 'Log CAN Traffic' Toggle to Reflash
CAL-1560 Tab switching upon an attempted Save As/Save
CAL-1562 Issue jumping tabs and then clicking 'Start Log' button
CAL-1564 Unexpected switch between tabs when pasting between tabs
CAL-1565 RCM80-2304 - Improve reflash speeds
CAL-1566 Remove the Default Session Re-tries Section from the beginning of the RCM-80 reflash procedure
CAL-1568 M47 - Improve reflash speeds
CAL-1572 Create a utility function to always return a valid 'block size'
CAL-1575 Add a 'Stop if Module Found' checkbox to the Find Modules feature when using 'Find All'
CAL-1576 Implement a better Error Message for when a newer display schema is opened that can be handled
CAL-1577 GCM111 - Improve reflash speeds
CAL-1578 Convert StripChartToolbar to MVVM
CAL-1579 Strip Chart Scale not entirely accurate away from center
CAL-1582 Convert Scale to MVVM
CAL-1583 Convert StripPlotScaleManager to MVVM
CAL-1588 Overhaul the Edit Ranges / Colors Dialog

Release 2023b_1.1.13506

Details

CAL-3362: Add new M47 Bootloader Rev
CAL-3388: Support RCM80-2304 bootloader v320

Release 2023b_1.0.13438

Highlights

Theme Update!
- Raptor-Cal now matches the color scheme used by Raptor-Dev Blocks
Datalogging Triggers
- New feature found under Logging Settings within a display (wrench icon in toolbar)
- Allows for triggers to be set on the active grid to start/stop logging
Multi-Display Datalogging
- Expanded datalogging to allow for multiple active display grids to be simultaneously logged into the same .csv file (max. of 3)
- Enabled in the main Settings menu (Logging Multiple Display Grids toggle)
Command Line Features
- Certain Raptor-Cal features are now able to be used via a command line shell
- Transfer Cals (RCAL -> RPG)
  - EX: “transfer file1.rpg file2.rcal output.rpg”
- Export Calibrations
  - EX: “export file1.rcal file2.rpg output.m (false)”
- Import Calibrations
  - EX: “import file1.m file2.rpg output.rcal”
  - OR: “import file1.m file2.rcal output.rcal”
- Extract Calibration
  - EX: “extract_cal file1.rpg output.rcal”
Custom Layouts
- New feature added under 'View' in toolbar
- Can save and reload orientations of the Signals, DAQ, and Strip Chart views at any time between sessions
- 'Default Layout' also under 'View' in toolbar will reset the View orientations
Display/Calibration Format Override
- New display feature allowing for the 'Display Decimal Places' attribute of a signal set in the model to be overwritten
- Saves directly to the display/calibration between sessions
- Does not overwrite value determined in model
Export Calibrations
- Expanded the 'export to .m file' feature to be more customizable
  - Toggle signal pathing
  - Toggle Software ID for signals
  - Export enumerations with their string values
  - Export values as 'ungained'
Import Calibrations
- New feature that allows for a new calibration to be created from a previously exported .m script and an RPG/RCAL
- Selecting an RCAL for the Signal Definition will merge the .m script values onto the RCAL

Details

CAL-1830: Investigate faulting issues with DAQ lists
CAL-1832: Investigate unused features within Transfer Calibrations feature
CAL-1833: Add ability to change baud rate within discovery dialogs
CAL-1837: Expand Reference Values in header of Data Logs
CAL-1840: Issue reading checksum when extracting from module
CAL-1842: Add flag to Export .rcal Command Line option that would extract calibrations w/o the calculated Gain value
CAL-1844: GCM-111 Byte Order is incorrect when using any calibration feature
CAL-1845: Prevent direct memory accessing for VeeCAN Modules
CAL-1846: There is an intermittent error where the data fields displayed/recorded for a multibyte array are ordered incorrectly
CAL-1847: Remove Lite Mode Feature
CAL-1850: Crash on start-up if machine has FIPS compliance check enabled
CAL-1851: Refactor UdsReflash Procedures to use globally used CANMessage Class
CAL-1859: Raptor-Cal Color Scheme Update
CAL-1864: Updating svn:ignore settings
CAL-1874: Allow for Multi Active DAQ Datalogging
CAL-1875: Show in Explorer for logger crashes
CAL-1876: Certain Signal Values not being converted correctly when exporting to an .m file
CAL-1882: Add option in the 'Export' feature to export enums as the value or string
CAL-1885: Configure the format override to work as intended with Partial Calibrations
CAL-1886: Allow for ability to override the Signal Formatting within Displays/Calibrations
CAL-1887: Signals moving unexpectedly between DAQ lists
CAL-1888: Change new Views to be created on the left side of the screen
CAL-1889: Bit Arrays not being converted correctly
CAL-1891: Update Customizer to include the new NewEagleAccent global value
CAL-1892: Make so the 'Save As' option can be performed at any time
CAL-1898: Update Raptor-Cal Help Documentation with Screenshots/Explanations of 2023a 2.0 Features/Color Scheme
CAL-1900: Add ability to set the wait-for-response time during discovery
CAL-1901: Change About Screens to always get the current year
CAL-1907: Connect Online Display dialog shown after display is closed
CAL-1908: Change Error Dump feature to only grab files within the Raptor-Cal Error Reports folder
CAL-1910: A means of having the tabs return the the default layout oreintation
CAL-1912: Issues with the 'Signal Summary' section in the Signals View
CAL-1915: Add additional space between rows of the Module Label within the Signals View
CAL-1919: Organize Error/Crash Reports in LocalFiles
CAL-1921: Add way to Create New Partial Calibration directly from the New... menu in Start Page/Toolbar
CAL-1922: Add Copyright Headers to all Source Files within project
CAL-1924: Signals View is cleared if Partial-Cal creation screen is open and original calibration is closed
CAL-1925: Added RCM-5734R-080-2203-RTOS target
CAL-1926: Specifying more information on each thread
CAL-1927: Allow for the baud rate to be modified if all open documents are Offline; Allow Find Modules to be used
CAL-1928: Resizing Display Window Crashes Raptor-Cal
CAL-1931: Calibration window with over 50 calibrations duplicates cals on second tab each time tab is visited
CAL-1934: Raptor-Cal reads "Connecting..." endlessly in bottom left hand corner and does not open display
CAL-1935: Add cursor change when loading
CAL-1938: Refactor Discovered Module Tiles
CAL-1940: Ability to easily see calibration transfers
CAL-1941: Export Calibration that is not a GCM/ECM\_196 generates incorrect Enum
CAL-1942: Expand 'Import Calibrations' to optionally accept an existing RCAL file to merge the import onto
CAL-1943: Add 'Include Software ID' option in Export Calibration Menu
CAL-1944: Clicking on Raptor associated files while Raptor-Cal is running
CAL-1945: Create Import/Export Calibrations Dialog; Expand Import/Export Functionality
CAL-1946: Import \(.m\) file to Calibration
CAL-1947: Add Import/Export \(.m/.rcal\), and Extract .rcal from .rpg commands to be usable from the command line
CAL-1949: Implement a keyboard shortcut for scrolling horizontally in a display
CAL-1950: 1D/2D signals make size of the UpgradeFix Signal Box after a Calibration Transfer extremely wide
CAL-1951: Cut command does not work with plain text cells
CAL-1952: Reopen existing instance of Raptor Cal on shortcut click
CAL-1954: rcal -> rpg transfer calibrations fail unit tests.
CAL-2183: Update Raptor Cal/XCP for CANFD
CAL-2714: Triggered start and stop
CAL-3346: Prevent XCP Errors/General exceptions from being shown in the status bar
CAL-3347: Handle unknown exceptions in Reflash Dialog when attempting to reflash
CAL-3349: Fix progress bar in reflash screen when no module photo is displayed
CAL-3352: RIL DataDictionary able to have duplicate key added
CAL-3354: RIL Packager causing RPGs to be built corrupted \(no program code\); Raptor-Cal allowing this to be flashed onto a target
CAL-3357: Support RCM-080 bootloader v3.0.0
CAL-3358: Support GCM111 Licensing Protection
CAL-3364: Support RCM80_2304 bootloader v3.1.0

Release 2023a_2.0.13328

Highlights

Added support for new target:
- RCM-5743R-080-2304
Includes updated License Viewer v.12.9
Bug/Crash Fixes

Details

Full Issue List

0005014: [Installer] Update New Eagle Licensing to 12.9
0004871: [General] Update EULA/License.rtf
0004848: [Raptor-CAL] Routine Control state is not reset after a session has changed. Force ECU Reset
0004876: [Raptor-CAL] Crash on startup when System.Config elements are unable to be accessed
0004964: [Display] Crash if a signal has Bit Array signal Number Base, and then a check is made to convert Number Bases
0004963: [Display] Crash if '∞/infinity' is value of signal when signal is set to Bit Array and a conversion check is then performed
0004723: [Datalogging] Decimal commas creating incorrect datalog for users in countries with that standard
0004810: [Command Line] 'ArgumentException' occurring when using transfer command on the command line if no file path given
0004749: [Raptor-CAL] Re-configure Existing UI Tests to work individually

Release 2023a_1.0.13187

Highlights

Warning Ranges Feature
- Indicates when a signal exits a set range
- Can change background and text color
- Can enable emission of a system beep
Added Keyboard Commands
- Tab:
  - Ctrl + Left/Right-Arrow: Switch Current Tab
  - Ctrl + T: New Tab
  - Ctrl + Shift + Left/Right Arrow: Reorder Current Tab
- Display:
  - Ctrl + I: Interpolate
  - Ctrl + M: Heat Map
  - Ctrl + A: Add to Chart
  - Ctrl + N: Increment/Decrement Menu
  - Ctrl + W: Warning Ranges Menu
  - Ctrl + H: Hexadecimal
  - Ctrl + B: Bit Array
  - Ctrl + D: Decimal
- General
  - F1: Flash
  - F2: Find Modules
  - F3: Compare Calibrations
  - F4: Transfer Calibrations
  - F5: Refresh Signals
  - F6: Show Help
Improved performance in larger displays
Added Settings, License Viewer, and Help Documentation buttons to Home Page
Transfer Calibration to an .RPG using Console-Commands
- EX: "start Raptor-Cal transfer file1.rpg file2.rcal output.rpg"
Upgraded MotoHawk Packager to Version 0.26
- Includes support for GCM70-1702 and GCM70-1704 modules
Bug/Crash Fixes

Details

0004710: [Raptor-CAL] RCM112/RCM80 Recovery Image
0004748: [MotoHawk] Update MH Packager to version 0.26
0004725: [Calibrations] Issue reading checksum when extracting from module
0004534: [Raptor-CAL] Discovery window can be clicked anywhere to open the module
0004498: [Raptor-CAL] Immediate crash if Enable Update Check is on and Raptor-Cal is started
0004477: [Raptor-CAL] Add Key-Binding Shortcuts for Existing Home Page Commands
0004548: [Raptor-CAL] Raptor-Cal will not search for .rpgs that are within folders within the set RPG folder
0004539: [Display] Re-enable Interpolate feature to Raptor-Cal displays
0004565: [Raptor-CAL] Add build number to module discovery information
0004615: [Raptor-CAL] Raptor-Cal Command Line transfer calibrations feature
0004481: [Display] Add Keyboard Shortcuts to the display
0004567: [Calibrations] Memory Leak when closing a calibration table
0004424: [Display] Signal Ranges feature
0004002: [Raptor-CAL] Raptor-Cal crashes when opening a Raptor-Cal Display file with no .rpg file in file system.
0001368: [Raptor-CAL] Keyboard tab commands
0004712: [General] SmartAssembly Error in RILPackager
0004667: [Charting] Strip Chart Plot Popup does not get re-initialized with the correct width/height if the Strip Chart View is re-sized
0004521: [Raptor-CAL] Update Check Screen crashes when selecting "Cancel"
0003223: [General] When Raptor-Cal crashes, sometimes it doesn't close but rather hides in Windows Background Processes so you can't restart it
0004587: [Raptor-CAL] Navigator Window appears glitched when shown
0004671: [Display] If an offline display is opened, and then connected to, new signals dragged in will be in Read-Only mode no matter what
0004597: [Display] Changing Enum Cell Selection by keyboard not saving to target
0004410: [Display] Using the arrow keys, you can enter the row/column headers and scroll without the chart following
0002397: [Raptor-CAL] Raptor-cal considers Key board keys as shortcut keys while changing value for an ENUM signal drop-down
0004503: [Raptor-CAL] Dragging large signal group onto grid from Signals View causes memory leak/crash
0004366: [Raptor-CAL] Crash when changing Kvaser Baud rate in the bottom toolbar
0004220: [Display] Toggling the Calibrations button in a Signal View affects all open displays/calibrations
0002757: [ECU Support] GCM196 Recovery improvement
0004582: [Datalogging] Crash while Datalogging in Raptor-Cal
0004602: [Display] Table not resetting due to Raptor-Cal not recognizing target changed the signals value
0004654: [Raptor-CAL] Add Settings, License Viewer, and Show Help buttons to Home Screen
0004491: [Display] Omit saving default elements to a display file
0003267: [Raptor-CAL] Low Priority queues always run at 500ms even if the setting says otherwise
0004528: [Display] Crash if you select the Signal Module Label along with a signal and drag into a display
0004258: [Display] Investigate why large displays take so long to close
0004598: [Display] Double-Click between column headers not sizing correctly for enumerations
0004443: [Display] Add error messages for when signals can't be dropped
0004506: [Calibrations] Separate completion percentage from signal name when extracting a calibration from module

Release 2022b_2.0.13068

Highlights

Partial Calibrations
- Right-click the module within an open calibration to bring up the option to create a partial calibration
- To build the Partial-Cal, drag folders/signals from the signals view into the newly created Partial-Cal window
- Created Partial-Cals can be used with the transfer/compare calibration features
Improved converting to/from Decimal, Hexadecimal, and Bit Array in a display
Improved selection in a display alongside 'Right-click' features
Bug/Crash fixes

Details

0003149: [General] After switching from DAQ tab back to Signals tab, search text is greyed out and you can't search
0004405: [Datalogging] Strip Chart 'Replay Log' feature currently unusable
0004426: [Display] Include cell elements in a Display (Upgrade) transfer
0004370: [Display] Out of range (min/max) value can be entered in non-scalar signals
0004314: [Display] 'Object reference not found' when opening calibration signal while module is re-connecting
0004384: [ECU Support] Allow reflashing a module when multiple are on the bus if they have the same software ID
0004388: [Performance] Huge performance hit while moving a 'View' to docked location
0004387: [Charting] You can currently add 20+ signals to the chart by using the 'Right-click -> Add to chart' method
0004397: [Display] Change logic of NumberBase features
0004369: [Display] Conversion of string saving border values crashing in some non-US languages
0004413: [Display] 1D/2D X/Y Columns/Rows do not support converting to Hexadecimal/Bitarray NumberBases
0004436: [Display] You cannot drag in folders within folders when moving adding from the Signals View to the display
0004414: [Display] Converting a signal with a negative value to Hexadecimal gives incorrect result
0004398: [Display] Change logic of Right-Click options in a display
0004430: [Raptor-CAL] Odd re-sizing when Folder is selected in Signals View
0004368: [Raptor-CAL] With a large amount of recent displays, or resizing the window, Recent Displays menu gets cutoff
0004365: [Raptor-CAL] Elements in Transfer/Compare calibration and the Start Page (Home) can be hidden in small windows
0004417: [Raptor-CAL] Prevent re-sizing on Find Module/Flash dialogs
0004374: [Raptor-CAL] Crash when moving errored signal in DAQ lists with looped hardware setup
0004364: [Raptor-CAL] Disable 'Select' button while flashing a module
0004433: [Raptor-CAL] Raptor-Cal can be resized and moved out of screen, re-opens in same spot where you cant grab
0001324: [Raptor-CAL] Partial calibration functionality
0003693: [Display] Variable highlight doesn't always clear if folder containing it is collapsed
0004389: [Charting] Strip chart showing multiple scales at once
0003147: [Charting] Chart behaves strangely when removing variables and then adding others
0003499: [Charting] Chart repeats colors when adding new signals
0004381: [Charting] Displayed values on chart scales are incorrect
0003500: [Charting] Chart defaulting back to auto-scale on, all white colors, and min/max gets reset too
0004358: [Calibrations] Calibration Compare report does not match Compare Calibration screen

Release 2022b_1.0.13007

Highlights

Visual indication between read/write and read-only signals (new signals placed on a display will be light grey if read-only)
Display Customization Features:
- Can now change the cell color, signal background color, and text color
- Can now add custom borders
- Can now convert scalar signal values to a Bit Array
'Double-Clicking' between column headers within a display expands the column to view all hidden text
All 'Right-click' display features now work across the entire grid selection ('Left-click' and drag to create a selection)
Improved Help Documentation:
- In Toolbar, 'Help' -> 'Show Help' now opens documentation in user's browser
- Help buttons included within Raptor-Cal's documented features that link to specific documentation
Bug/Crash fixes

Details

Bug Fixes

0004234: [ECU Support] Enable ability to reflash ECM_5634M_070_061_1403_DEV modules
0004248: [Display] Customer Reports a Crash when opening specific display on the RCM80
0004243: [Display] Crash when connecting to a display when already opened as offline (.rpgs for module and .rdis do not match)
0004330: [Raptor-CAL] Displays will sometimes open in a state where DAQ refresh is 10x less the speed as it should be
0004339: [Raptor-CAL] Clean Up Code Base
0004027: [Display] Using the copy paste commands, you are able to input signals from different .rpgs into displays
0004029: [Display] Incrementing a group of signals causes Raptor-Cal to crash
0004030: [Display] Enabling Heat Map on a group of variables with a blank cell included causes crash
0004031: [Display] Increment feature is not registered as "savable" change
0004035: [Charting] 'Add to Chart' appears after right-clicking on all signals, even if they are not compatible with the chart
0004037: [Display] Implement ability to add multiple signals to the chart at once
0004045: [Display] Add ability to edit the background color of cells, and background of text in a display
0004048: [Display] Add ability to edit the color of signal text in a display
0004067: [Display] Enable color features on 1-D/2-D tables and Matrices
0004092: [Display] Add ability to create a border around a selection
0004112: [Raptor-CAL] Feature request: set numbers to bit arrays
0004255: [Display] Cell Manipulation Issues
0004169: [Display] When a module is re-connecting, there is no intuitive way to cancel the connection process
0004223: [Charting] An odd checkered color can be set to a signal, which is not compatible with the chart feature
0004225: [Display] Vectors don't gray out all cells
0004109: [Raptor-CAL] Flashing a module with a online display open, and then opening online display causes crash
0004049: [Raptor-CAL] Save the colors associated with cell into the .rdis file
0004253: [General] Investigate updating To SmartAssembly Version 8.0
0004228: [Raptor-CAL] Add increment keyboard values to the Signal Increment window dialog
0004197: [Display] 'Double-Clicking' in between column headers expands to the max length of text within that column
0004072: [Documentation] Improve Raptor-Cal help documentation
0004312: [Calibrations] Creating a new calibration from Motohawk module sometimes fails and does not notify user
0004259: [Raptor-CAL] Create shortcuts within Raptor-Cal's features that point directly to pages of documentation
0004099: [Display] Crash occurring when module loses connection while connecting
0004106: [Performance] Spamming "Disconnect All" causes major performance issues in an offline or online display
0004103: [Display] Raptor-Cal randomly freezes when manipulating DAQ queries
0004208: [Charting] Text within strip chart header is hard to read
0004195: [Display] Screen moves column headers when typing in wide displays
0004194: [Display] Dragging signals onto a display sometimes drops twice
0004224: [Charting] Adding signals to the chart when you are 'Replaying' a previous log causes issues
0004219: [Charting] If Replaying a Datalog within the Strip Chart, "Viewing Saved Log" remains after the replay has been stopped
0004231: [Charting] Replaying and then Stopping the replay of a log initiated from the toolbar within the strip chart causes crash
0004245: [Raptor-CAL] Raptor-Cal freezes after flashing a module with a RP1210 adapter, then trying to connect using Kvaser in same session
0004246: [Raptor-CAL] Error msg being displayed in bottom left-hand corner now that I have previously connected to a RP1210 device
0004275: [Raptor-CAL] Remove unnecessary error info when running both Raptor-Cal and Raptor-Service
0004229: [Display] Add ability to change text color/signal label color in a display
0004305: [Raptor-CAL] "Unknown UNKNOWN" module sometimes appears in Flash dialogue when connected to GCM-1793-196-1503
0002456: [Display] Crash if trying to drag a signal onto the chart when the wrong online display is in the foreground
0003529: [Raptor-CAL] Crash if you unplug your Kvaser and plug it back in (this issue was fixed before but is back again)
0004097: [Raptor-CAL] Unchecking "Show Chart" or "Show DAQ" before viewing that tab crashes Raptor-Cal
0004230: [Calibrations] Null characters can be added to the .m file while using .rcal to .m feature
0004241: [Raptor-CAL] Keyboard shortcuts can be mapped to the same key
0004303: [Raptor-CAL] Ability to change the CAN bus channel
0004237: [Raptor-CAL] "Channels" is blank within the CAN Settings menu when RP1210 is enabled
0002398: [Display] Feature Request: Save active tab as part of the RDIS
0004056: [Display] Add ability to copy/paste cell elements (colors/text alignment)
0004051: [Display] Copy/paste feature functions incorrectly
0004052: [Display] Color of cells does not get copied over when move/undo
0002188: [Raptor-CAL] VeeCAN Flash Error - create pop up for user to use USB
0004105: [Datalogging] Crash when starting datalog when module is offline
0004213: [Display] Larger margins between text and edge of cell
0004073: [Display] Allow signals to be dropped on one another to work similarly as copy/paste
0004066: [Calibrations] Disable invalid commands in calibrations
0004068: [Raptor-CAL] Disable Cancel Button During Reflash
0004178: [Display] Issues related to 'Display Font Size' in settings
0004093: [Display] Table borders do not travel with a signal drag-and-drop
0004200: [Display] Columns can be dragged to small sizes, making them hard to identify/resize
0004172: [Raptor-CAL] Update Images for RCM112 and RCM80
0004100: [Raptor-CAL] Visual glitch when attempting to create new online display if the module is not found
0003258: [General] Add warning when user tries to enter a value outside the min/max that the A2L allows
0004107: [Raptor-CAL] Crash when removing a signal from the chart after disconnecting a display
0004102: [Display] You are able to "Set Text Alignment" even if there is no text in the cell
0004096: [Display] Implement a "paste to many" cells feature for cell color
0004081: [Raptor-CAL] Re-design right-click menu for displays and calibrations
0003986: [Raptor-CAL] Set home view as current window after creation
0004098: [ECU Support] Make the recover checkbox a button
0004083: [Display] Text entries are not registered until the display is re-opened
0004034: [Charting] Attempting to "Edit Ranges/Colors" with no signals added to the chart gives inaccurate error message
0004059: [Display] Disable Heat Map option for non-table signals
0004085: [Display] Hex Number should set be set to the same value on all cells in a group
0004080: [Display] Raptor-Cal will attempt to convert string values to hexadecimal resulting in a crash
0004057: [Display] Colors do not come back with undo when deleted from a display
0004047: [Display] Add color picker menu for cells by category
0004058: [Display] Text alignment does not move with a signal in a display
0002272: [Display] Way to visually indicate between read/write and read-only signals
0004023: [Raptor-CAL] Crash when finding module when connected to an online display.

Release 2022a_2.0.12825

0003986: [Raptor-CAL] Raptor-Cal crashes when viewing an offline display and exiting a home view
0004024: [Raptor-CAL] Opening online display with an .rpg that is already in an online display causes crash
0001571: [Raptor-CAL] Periodic Update Check
0004010: [Licensing] Raptor Cal checks the wrong license year
0004026: [ECU Support] USB Update for VeeCAN 320s needs to be updated
0003716: [Raptor-CAL] Misspelling in settings menu
0003106: [Raptor-CAL] Let user know they need to enable virtual CAN if not already enabled
0004022: [Raptor-CAL] If Enable Virtual CAN is saved in settings, it will not stay virtual on bootup
0001639: [Display] Raptor-Cal support for large vectors
0003560: [Raptor-CAL] Raptor-Cal shows error/crash when "Restoring Defaults" in File>>Settings
0004009: [Raptor-CAL] Set the current baud rate to what was found using the "Find All" feature under "Find Modules"
0002489: [Calibrations] Ability to add comments to rcal
0003420: [General] Scan City IDs lower limit has ceiling of 4
0001711: [General] In Find Modules, don't show ECU Address for modules for which don't have one or isn't relevant
0003438: [General] M-File export doesn't work

Release 2021a_1.0.12726

0003605: [Raptor-CAL] Raptor Cal not working with latest Kvaser Drivers
0003471: [Raptor-CAL] About Raptor-Cal banner is out of date.
0003522: [ECU Support] Add Support for XCP table revision 4
0003240: [General] Intermittent GCM48 flash failures
0003583: [Raptor-CAL] When Raptor-Cal is opened always “maximize” to full screen
0003648: [Raptor-CAL] Raptor Cal doesn't send XCP disconnect message to module when closing rdis.
0003583: When Raptor-Cal is opened always “maximize” to full screen
0003667: [ECU Support] Add Feature to save the last used module in the Recovery View Model
0003561: [ECU Support] Add support for the GCM-5605B-048-2104
0003596: [ECU Support] Add Support for UAS-5743R-047-2102
0003542: [ECU Support] Add Support for RCM-5746R-080-2005/RCM-5746R-080-2106

Release 2020b_1.1

Patch Release to fix RP1210 Crash error when also using PCAN Device
0003519: Raptor-Service VeeCAN Update Does Not Work
0002967: Flashing fails with a "system out of memory" error
0003496: Unable to create or open offline calibration on GCM70 RPGs

Release 2020b_1.0

0002276: [Raptor-CAL] Unable to flash gcm 196
0003227: [Raptor-CAL] Rapto-CAL crashes when you click out of renaming tab
0003333: [Raptor-CAL] Corrupted user.config causes tool not to load
0003368: [General] Raptor-Cal should ignore unknown modules
0003396: [Raptor-CAL] GCM 196 - Unable to connect after reflash if rpg isn't in C:\ECU\RPG
0003457: [Calibrations] Can't operate on some rpgs

Release 2020a_1.0

003178: [Charting] Crash if you drag a signal onto the chart after disconnecting the Kvaser
003201: [Charting] Raptor-Cal freezing while trying to edit the chart
003228: [Charting] Once you remove one signal from the chart, the "Remove" buttons is greyed out and you cant remove any other signals
003340: [Charting] RaptorCal freezes if you resize the chart on this particular rdis
003271: [Display] Can’t permanently remove these two signals from the Chart. Didn’t used to crash, but now today with a new RPG it does crash when
003320: [Raptor-CAL] Raptor-Cal on an infinite loop inside the OnRilSignalsUpdated() function
003125: [Charting] Save min or max and color with Chart signal properties
002722: [Charting] When auto-scaling is turned off in the chart, it won't stay off
003331: [Display] XCP Items can remain in DAQ Lists after being removed from the display
003148: [Charting] Chart only displays first 10 characters of each variables name
003317: [ECU Support] Support the DISP-VC700-2003
002132: [General] BCM48 CAN1 Reprogramming Baud Rate Options
003170: [Raptor-CAL] Recovery for C48 needs changed to UAS48
003289: [Calibrations] RIL Packager for GCM48 needs to use descriptor.exe for GCM48.
003166: [General] Can't enter a hex number starting with "B" into a calibration
002732: [Datalogging] Logged data takes computer number - causes problems with CSV format
002121: [Raptor-CAL] BCM48 Recovery Instructions
003187: [Calibrations] RPG to RPG transfer using the set value to change a cal doesn't work
003294: [Raptor-CAL] Disconnecting.. scrolling status bar shown after closing offline cal
003293: [Calibrations] New Calibration Online still goes ahead even if you select Cancel after selecting module
003287: [Charting] Charting signal list view improvements
003256: [Calibrations] Unable to set calibration due to corrupted display
003280: [Calibrations] Add more detail into the transfer or compare report
003260: [Calibrations] Show more detail in the compare calibration about the differences.
003262: [Charting] Add to parameters to chart from grid
002815: [Calibrations] Can't paste a table into a cal in the calibration transfer window
003270: [MotoHawk] RIL Packager can't create Motohawk packagers
003261: [Charting] Autoscale option not obvious, operation is odd
003264: [General] Application build produces RPG hex w missing or incorrect defaults
003259: [General] RILPackager export hex
003212: [Calibrations] GCM48 Failure during transfer calibrations

Release 2019b_2.0

0003142: In offline rdis, if you try to connect to a module, it wont connect but thinks its connected and crashes when you try to reconnect
0003128: [ECU Support] If you try to flash a GCM196 while another GCM196 is connected to the bus, the error message is not descriptive
0003141: [Display] Low Priority DAQ is filling up with variables that aren't in my display and eventually the whole DAQ stops working
0002829: [Raptor-CAL] Numerous issues doing normal calibration tasks for ECM112 MotoHawk module
0002832: [Raptor-CAL] Numerous out of memory exceptions
0002830: [Raptor-CAL] KnockFilter not Transferring correctly
0003140: [General] max-semaphore-count crash if power cycling module with online rdis and offline cal open
0003117: [Calibrations] Extract-cal-from-rpg feature extracting values from other open rdis's or rcals instead of the RPG
0002965: [Charting] Chart doesn’t work after reconnecting Kvaser
0002955: [Charting] When paused, chart data disappears while you're trying to review it
0003134: [Charting] With two displays open to two ECUs, strip plot should update when switching between.
0003132: [Charting] Opening two displays, both with Strip plot, closing one closes plot for both
0003085: [Raptor-CAL] "Calibrations" switch does not work correctly
0002431: [Charting] After extracting a cal from an online module, the chart disappears from your online display
0003041: [Display] Raptor Cal doesn't send the right sequence to stop a DAQ list from transmitting when it is empty
0003058: [Raptor-CAL] Tool does not perform well when RPG files are stored in folders other than C:\ECU\RPG
0003129: [Calibrations] Display not updated when changing NxN table items other than [0,0]
0003146: [Calibrations] When you change a cal, no matter the value, it says "0.00" when you hit enter, until you close and reopen the cal window
0003118: [Raptor-CAL] Compare-Cals not detecting CalIdTxt difference
0003114: [Raptor-CAL] Add version attribute or similar to MotoHawk RPG and enforce compatibility
0003130: [General] When closing 1 of 2 online rdis's, RaptorCal sends the stop-DAQ XCP command to both modules, then doesn't send stop-DAQ again
0002563: [Raptor-CAL] If CAN 2 channel is defined, ECU disconnects from RCal when R-display is updated
0002981: [Display] Latest RaptorCal crashes when trying to open two online displays connected to two different modules
0003021: [Raptor-CAL] Remove USB Zip files from RilExtended Project
0003066: [Display] This RDIS crashes RaptorCal every time I try to open it
0003122: [Raptor-CAL] Added support for GCM48
0003013: [Raptor-CAL] Update packager to allow specifying inhale/exhale parameters to persist across a programming cycle
0002959: [Display] Quick connect checked causes Raptor-Service to crash
0003027: [General] This RDIS crashes RaptorCal every time when this RPG is flashed on the module
0002994: [Raptor-CAL] Raptor-Cal crash while starting programming of GCM48 running RPG not present
0003012: [Raptor-CAL] Update packager to allow specifying reprogramming compatibility constraints
0002972: [Raptor-CAL] While working offline the StatusBar generates errors that result in a significant number of err files related to CurrentBusLoad
0002997: [Datalogging] Variables on the Chart aren't included in rlog files

Release 2019b 1.0

0002166: [Raptor-CAL] After having RaptorCal open for a while, flashing fails with a "system out of memory" error
0002925: [Raptor-CAL] Offline changes to DAQ can corrupt RDIS
0002879: [Calibrations] Cal Compare - FaultManager variable has differences (added faults) but shows same in compare
0002691: [Calibrations] Transfer Calibrations do not work in Lite Mode
0002878: [MotoHawk] Issue with MotoHawk FaultManager - Fault Actions Shifting
0002887: [Calibrations] Transfer/Merge Calibration of Enumerated table doesn't update correctly using Row/Column headers
0002957: [Calibrations] Transfer Cal, Set Value, Cancel shows 'Manually Set'
0002958: [Calibrations] Transfer Cals shows Alert for new signal, won't let value be set, or save RPG
0002550: [Display] RDIS corrupted so that RaptorCal crashes every time I switch to the corrupted tab
0002898: [Display] Tool crashing when tab within display 'Method not implmented' exception.
0002863: [General] Difficulty connecting to GCM196 w/Raptor-Cal
0002478: [Raptor-CAL] Mouse Hover for Help Text is to short in duration
0002551: [Display] Chart default colors don't make sense
0002872: [Raptor-CAL] VeeCAN 500 - VeeCAN Update tool doesn't work to flash to USB
0002191: [Display] Some variables remain in the DAQ list after being deleted from the display tab
0002418: [Datalogging] RaptorCal locks DAQ rate of variable on one tab, and won’t change it when switching to another tab
0002897: [Display] Cannot open display saved in newer Raptor-Cal, no message to user
0002884: [Raptor-CAL] Tool crash on closing - Unauthorized Access Exception access to path CALNAME.rcal.back is denied - read only folder from SVN
0002899: [Licensing] Issue creating permissioned file using RIL Packager
0002869: [Raptor-CAL] VeeCAN 500 icon missing
0002796: [General] RIL Packager cannot set XCP and Programming permission flags when making new RPG from existing RPG.
0002915: [Raptor-CAL] Raptor-Cal and Raptor-Service if other open already, nondescript crash report provided
0002165: [Raptor-CAL] When right-clicking to change DAQ rates, sometimes all DAQ options are greyed out
0002432: [Datalogging] When removing a variable from the chart, it’s removed from the DAQ list even if that same signal is still on the spreadsheet
0002690: [Datalogging] CSV file does not display the initial value of a displayed signal
0002929: [Raptor-CAL] Unable to move signals between DAQ lists
0002702: [General] RaptorCal release candidate shows the wrong value when dragging a new calibration onto an rdis
0002727: [Raptor-CAL] Raptor-CAL DAQ list graphical weirdness

Release 2019a 2.0

0002831: [Raptor-CAL] PTOVehSpdHiThr and AxleRatio not comparing correctly
0002856: [Raptor-CAL] App crash on select ECU for Reflash
0002834: [Display] User submitted crash - IndexOutOfRange during paste
0002833: [Display] Null reference exception when adding signal to manual query list
0002823: [Raptor-CAL] Restore defaults button causes the id list to grow
0002820: [Calibrations] Can't transfer this rcal over to this rpg
0002827: [Raptor-CAL] Convert rcal to .m doesn't work
0002825: [Raptor-CAL] Code tweaks to help with memory consumption
0002759: [Raptor-CAL] Refactor RaptorModules to make it easier to add new targets
0002648: [Display] Raptor-Cal toolbar needs a refresh button
0002773: [Calibrations] In compare calibrations, 'View Value' in 'File A Only' crashes R-Cal
0002785: [General] UnauthorizedAccessException when saving a display
0002786: [General] InvalidConnectionException when getting signals by name
0002768: [Display] Add a button to Raptor-Cal to resync the connection
0002788: [Display] Allow grid columns to resize to 0
0002792: [Display] Read Only enums are displayed as read/write
0002713: [Raptor-CAL] RaptorCAL crashes / disconnects from GCM80 w/ MPDM
0002796: [General] RIL Packager cannot set XCP and Programming permission flags when making new RPG from existing RPG.
0002789: [Display] Adjustment parameter not showing correct Set value
0002704: [Display] Raptor-Cal cannot open display file

Release 2019a 1.0

0002697: [ECU Support] Add support for C48 target
002561: [ECU Support] Add VeeCAN128 to Raptor-Cal
002679: [Raptor-CAL] Raptor-Cal Transfer-Cals does not complete for ECM112 rpg
002618: [Display] Raptor-Cal sometimes crashes when disconnecting from a display without saving
002385: [Display] Min and Max are not being enforced
002269: [Raptor-CAL] Quick connect fails when attempting to connect to two ECUs with same base firmware
002602: [Display] Online displays do not show read only enums properly
002462: [Raptor-CAL] Cannot upgrade the display of a VeeCAN
002665: [Display] Logging buttons to not work from charting tool
001865: [General] Raptor-Cal indicates saturation during Transfer Cal procedure due to very small precision differences
002531: [Display] Can't open a VeeCAN-based RPG for offline display
002528: [Raptor-CAL] Raptor-Cal crashes when you are using hex numbers and you put an x as an entry to a cell
002672: [Raptor-CAL] Add version info to main window title bar
002604: [Calibrations] Cannot transfer calibrations for GCM70-1459
002567: [Calibrations] Cannot view freeze frame data nor fault manager in compare cals screen
001709: [General] Do not send out address claiming messages during Find Modules function
002608: [Calibrations] Open Offline Calibration displays obscure error message if RPG isn't in default path
002680: [Display] Throwing of InvalidConnectionException causing Raptor-Cal to crash
002009: [Display] Chart auto-scaling feature
002498: [MotoHawk] The exponent for MotoHawk vardecs is ignored by Raptor-CAL and the MIL

002330: [Raptor-CAL] Chart context menu flickers

Release 2018b 3.0.11983

Release Date: 2018-04-04

Highlights

Include New Eagle Licensing V12.6

Details

Bug Fixes:

0002596: NullReferenceException when connecting to module in lite mode
0002595: Null Reference Exception when creating offline package
0002594: ECM112 calibration in Raptor-Cal loses precision for calibration that has header
0002593: Signals upgraded for shape not correctly flagged
0002590: CRC checks failing on some targets
0002565 - Fault manager enums are not shown in Cal compare screen
0002570 - Matrix Calibrations populated with Target data not Source data
0002568 - Data read from ECU is sometimes displayed incorrectly.
0002567 - Cannot view freeze frame data nor fault manager in compare cals screen
0002544 - Cannot adjust values on a VeeCAN320
0002329 - The last option in context menu of chart says "Show Cursor Values"
0002352 - Incorrect increment a drop down list for an enumeration causing it to crash
0002547 - Motohawk fault manager cannot be calibrated online
0002499 - Raptor-Cal does not correctly handle class of bitfield (relevant for MotoHawk OBD fault manager)
0001524 - Support for N/A variables
0002136 - Transfer Calibrations - Set Value: Grids with multiple rows and columns change position and size on window resize
0002537 - Add MotoHawk exponent to Signal Summary and add tests to validate calculations
0002548 - Uninstaller (of previous version) not finishing during install of Raptor-Cal
0002328 - Raptor-cal crashes on deleting and adding back a signal in chart
0002332 - Offline display upgrade feature strips all chart signals from the display
0002498 - The exponent for MotoHawk vardecs is ignored by Raptor-CAL and the MIL
0002330 - Chart context menu flickers

Release 2018b 2.0.118543

Release Date: 2018-02-08

Highlights

Support for new target GCM-5607B-80-1901 (GCM80)

Details

Bug Fixes:

0002401 Raptor-Cal crashes on startup if default folders are not accessible
0002457 Units different on cal dialog vs Signal Summary

Features:

0002267 Add new GCM-5607B-80-1901 target

Release 2018b 1.0.11803

Release Date: 2018-12-18

Highlights

Include New Eagle Licensing V12.5

Details

Bug Fixes:

0002377 Drag-drop does not always function correctly
0002248 Double clicking on a calibration in the same A2L function does not open that calibration
0002344 Update GCM/ECM196 reflash code to use UDS Functional Address for Comms Control during reprogram
0002341 Raptor-Cal crash on closing tabbed display
0002302 Crash when right clicking on a cell
0002337 The transfer upgrade process is not completing on a GCM196
0002338 when displaying a table with its index on the display, the first element in the index reads an incorrect value
0002274 XCP Issue with raptor cal
0002152 Get-Calibration-From-Module feature injects erroneous values in some of the cal tables
0002298 Cannot edit a blank TEXT signal
0002084 50kbps (not 500kbps) is an option in one baud menu but not another
0001843 RPG Packager reporting error running out of temp folder
0002235 Redo-ing the deletion of a grid tab crashes Raptor-Cal
0001313 Have option on .rdis to hide calibrations
0001752 In Transfer-Cals summary, for valid transfers, indicate # same vs. # different
0002053 Resize RDIS grid do not support Undo/Redo
0002267 Add new GCM-5607B-80-1804 target
0002266 Recovery messages continue on the CAN bus after dialog closes (BCM48, Parker) - this can interfere with programming
0002246 When auto display is created after flashing most values are blank
0002239 Crash when closing calibration

Features:

0002056 Allow Raptor Packager to use a .rpg file

Release 2018a 2.0.16000

Release Date: 2018-09-14

Highlights

Include New Eagle Licensing V12.4

Details

Bug Fixes:

0002213 Transfer cals is not working for these two rpgs
0002225 uint16 cannot be modified in RaptorCAL.
0002111 Raptor-Cal display folder tree scroll to end on width stretching
0002017 Rename grid do not support undo/redo
0002174 More consistent response from signal tree when double clicking on calibrations
0001737 More consistent response from signal tree when double clicking on calibrations
0002158 Extremely slow Fault Action Cal's access
0002099 Transfer Calibrations: Data Saturation at target min/max when equal to limit
0002206 Fatal error on creating a new display and undo
0002071 Calibrations are displayed in offline display and can be edited, but not saved
0001520 Cell Values are not highlighted when working in tables and map windows when online
0002148 Adjustments in Manual Queues are not updated on reconnect.
0001322 If open online or upgrade .rdis with missing variables, these variables disappear completely from grid
0002124 License Viewer should close when closing Raptor-Cal
0001723 Raptor-Cal .rdis shows dirty marker when calibration changed from display
0002152 Get-Calibration-From-Module feature injects erroneous values in some of the cal tables
0002153 RaptorCal crashes when trying to compare display RPGs
0002163 rcal variables with non-zero cal values are showing up as all zeros in the offline cal editor
0002151 Crash after reflash with quick-connect
0002198 Disconnecting Kvaser from USB causing Raptor-Cal to crash

Features:

0001879 Method to use offline data to populate online calibration displays
0001772 Transfer Calibrations: Make column sizing changes affect the three views
0001458 Auto-Save Current RCAL
0001741 Add "Properties" window at bottom of Signals tab
0000975 Module discovery across multiple baud rates
0000658 Auto-save current display

Release 2018a 1.0.11391

Release Date: 2018-06-21

Highlights

Include New Eagle Licensing V12.2

Details

Bug Fixes:

0002119 Display opens incorrectly when Windows culture set to es-ES
0002110 Large UINT32 numbers do not get converted to hex correctly.
0002089 calibrations not working on arrays or 2d tables
0002087 BCM48 programming large application fails second time
0001310 Improve Connect / Disconnect functionality
0002068 Sometimes click/drag combination does not register
0001834 Cannot reconnect to module w/ display open after flashing new build.
0002015 Sparse logging not writing correctly.
0001961 Canceling Display Save Window Closes Display
0002008 Incorrect display values for chart range
0002064 .RDIS closing raptor cal
0002042 Raptor-Cal showing dropped CAN frames even when DAQ list not full
0001960 Cannot adjust DAQ rates when working with offline display
0001749 Incorrect icon for 1D or 2D interpolation table with storage set as flash
0002044 Please review default DAQ list
0002043 If High-Priority or Low-Priority query full, please continue to update all signals in that list, but just at a slower rate
0001987 Creates PlotTemplates directory in wrong location
0002040 Compare Calibrations dialog says "Transfer Calibrations"
0002048 Data store elements with Row/Column header seem to have index problem when seetting value
0002039 Raptor-Cal crashes when saving display
0002041 Please do not allow overloading of DAQ list
0002047 Faster/Slower button might cause confusion if DAQ list is full.
0002046 Please don't allow the user to overload the DAQ list

Features:

0002045 Raptor-Cal display and calibration screens must be made more compact
0000852 freezing the row/column headers so that you can adjust cell size wherever you are in a display
0001504 Resize RDIS grid
0002070 Add functionality to allow two instances of the same display file to be open
0000586 add option to hid row and column headers on grid

Release 2017b 0.0.2

Release Date: 2018-04-04

Details

Bug Fixes:

0002026 Cannot enable data logging if only DAQs are filled
0000198 data logging should prompt user when switching tabs
0001965 : When reading an item from controller fails, retry before giving up
0001994 Lookup table highlighting not functioning properly
0001773 Cannot save file when grid name is changed.
0002019 Delete a value in cell do not make window dirty
0001774 Text Justification Does Not Save
0001941 Display & ECU Are incrementally found in Raptor CAL
0000937 Raptor-Cal crashes when it doesn't receive an XCP response

Tweaks:

0001320 Need to improve behavior of pressing Enter from Set Value in Transfer Cals
0002006 Duplicate grid number on delete and add grid

Features:

0002016 Add new grid do not support undo/redo
0000620 "Package Found/Not Found" icon in discovery dialog
0001747 Cannot undo the deletion of a display grid tab
0002018 Delete a value in cell do not support undo/redo
0001312 If source .rcal or .rpg from non-default location in Transfer/Compare Cals function, go back to that folder for the target file
0001311 If .rcal or .rdis opened from non-default location, have Raptor-Cal also look in that location for the corresponding .rpg

Misc:

0001326 Implement standard look/feel across Raptor-Cal
0001950 Multiple instance of Raptor-Cal can be opened

Release 2017b 0.0.1 SP4

Release Date: 2018-01-15

Details

Bug Fixes

0001939 Crashing when zooming a display
0001944 Intermittent Connection to VeeCAN 800 display
0001726 Raptor-Cal transfers data during shape change even though it says "No Transfer Occurred"
0001954 Raptor-Service crashes when opening a display

Release 2017b 0.0.1 SP3

Release Date: 2017-12-06

Details

Bug Fixes

0001929 Signals disappearing from DAQ list
0001931 Text cells are blank after open
0001923 Multiple signals get dragged on display after a search
0001919 Error when trying New > Calibration (from .rpg) with MotoHawk module
0001938 Unable to see any Raptor adjustment blocks in offline display
0001937 Crashes when editing a vector, matrix or table in the Transfer Calibrations screen

Tweaks

0001916 The Find Modules display window is too narrow, and you can see the full software version text.

Release 2017b 0.0.1 SP2

Release Date: 2017-11-28

Details

Bug Fixes

0001917 Cannot Change Fault Calibration
0001923 Multiple signals get dragged on display after a search
0001919 Error when trying New > Calibration (from .rpg) with MotoHawk module

Release 2017b 0.0.1 SP1

Release Date: 2017-11-22

Details

Update New Eagle Licensing to v12.1

Release 2017b 0.0.1

Release Date: 2017-11-17

Highlights

Lite Mode: Use Raptor-Cal without a license. Work with RPG files created with the Lite version of Raptor-Dev.
Strip Chart: Using this new function, you're able to drag and drop signals onto the charting surface and plot up to 20 consecutive signals.
Better Kvaser Support: Now there is no need to restart Raptor-Cal if you Kvaser cable becomes unplugged. True Plug and Play support.

New Modules

Details

Bug Fixes

0001905 Raptor CAL won't load from recent display
0001902 Raptor-Cal crashes on startup with no messaging.
0001314 Would be nice to have ability to multi-select multiple values to drag in using CTRL and/or Shift)
0001887 Editing cell in Hex Number display enter 0xB2
0001851 Raptor-Cal hangs when Kvaser drivers not installed
0001888 Raptor-Cal crashes when closing Compare Calibration view value window
0001878 Calibration displays slow to open
0001849 SECM70 Compatibility between DEV and PROD
0001847 Cannot transfer calibrations made with difference version of the RPG Builder for MotoHawk (SECM-70)

Tweaks:

0001494 Periodic license check
0001805 DAQ Improvements
0001906 Order recent displays by most recent

Features:

0000206 add strip plot viewer for viewing log data
0001738 Add an "X" button to clear a search
0001721 Don't require a restart of Raptor-Cal when Kvaser USB-CAN unplugged and then plugged back in
0001911 Implement 'Lite' mode

Misc:

0001892 Update Kvaser drivers

2017-10-20: Release 2017a 0.0.1 SP6

Details

Bug Fixes

0001880 Display not saving DAQ lists correctly.
0001877 Changing a single value in a calibration table is slow to Update

2017-09-06: Release 2017a 0.0.1 SP5

Details

Updated NewEagle RPG Builder for MotoHawk installer to version 21.

Tweaks:

0001750 DAQ suggestions
0000752 Bottom status bar suggestions
0001823 Variable Help Text only pops up if you mouse over whitespace in the cell
0001838 Windows Firewall blocking application

Bug Fixes:

0001796 RP1210 adapter status "Not Available"
0001811 Enum signal shows blank and cannot be changed
0001803 Raptor-Cal crashes when trying to open a display
0001791 All SECM-70 modules are identified the same - Need to be distinct
0001798 Raptor RPG builder not assigning target correctly
0001837 CM0711 target showing up as unknown in some functions
0001842 Disconnecting frrom display (frrom signal tree) causes crash

2017-07-17: Release 2017a 0.0.1 SP4

Details

Individual features and bug fixes for 2017a 0.0.1 SP4 are listed in the below sections

Bug Fixes:

0001792 Cannot discover module when connect with boot harness

2017-07-14: Release 2017a 0.0.1 SP3

Highlights

Updated NewEagle RPG Builder for MotoHawk installer to version 20.

Details

Individual features and bug fixes for 2017a 0.0.1 SP3 are listed in the below sections

Tweaks:

0001783 Some icons missing frrom menus

Features:

0001785 Data logger doesn't support matrices
0001784 Data logger doesn't support arrays
0001788 Raptor-Cal crashes when trying to transfer cals
0001393 Raptor-Cal Splash Logo
0000204 UI branding
0000205 (Raptor-Service) installer branding

Bug Fixes:

0001782 Justification icons disappear
0001766 Signal tree should only show parameters available at the current connected access level or lower
0001765 Custom security - Support automatically supporting lesser level based on license permission level
0001778 Cannot merge RPG files
0001781 Grey box displayed on menu items

2017-06-21: Release 2017a 0.0.1 SP2

Highlights

Updated NewEagle RPG Builder for MotoHawk installer to version 18.

Details

Individual features and bug fixes for 2017a 0.0.1 SP2 are listed in the below section

Bug Fixes:

0001771 Precision not working on displays.

2017-06-15: Release 2017a 0.0.1 SP1

Major Enhancements

Add option to install NewEagle RPG Builder for MotoHawk when installing Raptor-Cal.
Add optional settings to create log files with custom naming.

Details

Individual features and bug fixes for 2017a 0.0.1 SP1 are listed in the below sections

Features:

0001746 Naming log files
0000798 Create desktop shortcut icon automatically when Raptor-Cal is installed

Tweaks:

0001724 Column width default in Raptor-Cal calibration grouping should take into account enumerations
0001751 If index array doesn't have units, don't show empty parentheses next to index array name
0001753 Have header for log file
0001727 Transfer-Cal scalar enumerations looked squished

Bug Fixes

0001556 Zoom fails in certain scenarios
0001703 Deleting a grid frrom a display does not cause the workspace to be flagged as dirty
0001745 Signals names do not appear in offline display
0001730 Show Signals menu item check mark
0001760 Cannot find VeeCAN displays with Find Modules function

2017-05-31: Release 2017a 0.0.1

Major Enhancements

Shortcut keys to increment / decrement values on the Signal Grid.
- Right click on any signal to setup the increment values.
- Shortcut keys can be customized in Settings.
Copy/Paste values between Signal Grids and in and out of Raptor-Cal.
Much improved undo/redo functionality.
MotoHawk recovery programming.
Improvements when searching the Signals Tree.
Grid zoom is now persisted.
Option added to data logging that will log data in sparse format.
Raptor-Cal can now scan multiple XCP addresses.
- Additional addresses can be configured in Settings.
Index arrays are now shown for tables and maps. No need to open another window to view.

Performance

Improved responsiveness when searching for signals in the Signals Tree.
Improvements when large sets of calibration data.

Details

Individual features and bug fixes for 2017a 0.0.1 are listed in the below sections

Features:

0001588 MotoHawk Recovery Programming
0000742 datalogging resolution
0000655 Support for multiple XCP broadcast addresses
0001587 Ability to cancel programming
0001661 Show index array values on interpolation tables and maps
0001327 Copy/cut-paste on .rdis
0000968 Keyboard shortcuts to increment/decrement cell values

Tweaks:

0001363 Incorrect(?) icons in a Raptor-Cal display
0001230 Improve signal search speed
0001325 Undo/redo functionality needs some work
0000366 add a batching mechanism to undo service
0001334 Improve Cell Clicking for Better Usability
0001185 Give higher priority to slower query lists
0001308 Grey out Save and Save All buttons when nothing to save
0001666 Long delay opening Fault Manager
0000567 need to support single-cell updates for writing to vector, matrix, table, etc.

Bug Fixes:

0001718 Cannot create Raptor Package frrom Motohawk build files
0001720 Module Discovery fails, unable to connect to module
0001620 Screen relocation doesn't stay
0001715 Application hangs/crashes when setting a value in Transfer Calibration screen
0001714 Application crashes when trying to move a signal above Fast query
0001526 Problem opening existing RDIS
0001705 Opening a display offline causes grid tabs to be duplicated
0001712 Unable to program Raptor RPG with XCP Security set to 'None'
0001622 Lose DAQ list ordering
0001621 Auto Queries DAQ items don't update
0001343 Dirty marker doesn't always show after DAQ or Query list is changed in .rdis, and then CTRL-S doesn't take
0001672 Making adjustments sometimes shows the error â€˜Failed to write: adjustmentâ€™ and the parameter won't change.
0001669 Recent Displays list only updates on opening the app
0001442 Error during installation
0001512 When extracting a .rcal frrom an online module, save dialog box doesn't automatically append CalIDTxt to suggested name
0001623 Updating application loses setup
0001318 Dirty marker doesn't always show after something is dragged in .rdis, and then CTRL-S doesn't take
0001316 Dirty marker should also show next to name in signal tree
0001606 Slower button not working
0001518 Freeze on copy paste.

2016-12-16: Release 2016b 0.0.1

Performance

A number of performance improvements have been put into place, in particular when opening a display, switching between tabs, and polling CAN bus statistics

RP1210 and other CAN Improvements

RP1210 compliant CAN adapters are now supported in the tool via licensing. Contact New Eagle Support for more details.

CAN baud rate may now be switched via context menu by right clicking the CAN status indicator at the bottom of the app.

Display Enhancements

Raptor-Displays may now zoom in and out with the mouse wheel (ctrl+mouse-wheel), overflowing display tabs may now be scrolled with arrow icons, or with the mouse wheel.

Details

Individual features and bug fixes for 2016b 0.0.1 are listed in the below sections

Features:

0000959 RP1210
0000974 Support for multiple baud rates without closing the tool
0001564 More module details available through module discovery dialog
0001560 Adding CAN Settings option to CAN Status indicator
0001533 CAN Status context menu to switch Baud Rate
0001541 Tab Scrolling
0001542 Zoom Control
0001530 ECM/GCM 24 Support

Tweaks:

0001323 When double click on large calibration grouping in a .rcal, the window is as tall as the screen
0001331 All signals in the signal tree should be in alphabetical order
0001532 Better RPG Resolution when opening files

Bug Fixes:

0001302 Resolved issue where Quick Connect not correct for Open => Display (online)
0001359 Resolved issue where CM711 recovery doesn't alway work
0001013 Fixed incorrect drop preview on signal grid
0001565 Resolved issue where certain DragDrop actions on grid cause COM Exception
0001538 Resolved issue where empty cal value caused application crash
0001531 Resolved issue where switching baud rates while bus is overloaded crashed application
0001519 Fixed broken link to table indicies
0001528 Resolved issue where closing a Display frrom the context menu leaves Table Windows open
0001553 Resolved issue in Calibration Compare report where signals frrom File A and B were swapped

2016-09-23: Release 2016a 0.0.2

Features:

0001413 Double Click cals frrom Signal tree and open cal window
0001371 Custom Security Implementation
0001337 Updated DataLink interface to allow switching baud rate without restarting Raptor-Cal
0001035 Display zoom in/out

Supported Modules:

0001453 Support for CM0711R
0001451 Support for S12x modules
0000311 Add functionality for assisting in recovery of Parker modules

Tweaks:

0001465 RAM Editables (but not overrides) need to show up in calibrations
0001464 Make Module Discovery "J1939 ID" consistent w/ Raptor Target Def
0001455 Raptor-Cal needs to handle rpg with no header
0001454 Large datasets don't fully show in FixValueDialog
0001449 Enum selector squished in Cal Editor
0001427 Scalar calibration editor used to leave cells in ambiguous state when switching between rows
0001426 Prevent SignalGrid frrom changing SelectedCells when doing drag-and-drop
0001425 Calibrating non-scalars offline did not show full double precision when editing cell
0001420 Resolve Package by Header on Discovery
0001335 In Calibration Group, Cells Remain Blue After Clicking
0001307 Consistent alert for missing RPG File
0001306 Adjusted how Raptor-Cal finds corresponding .rpg file
0001304 Popup after successful flash
0000904 Ad indicator of what cell or range of cells is/are currently selected

Bug Fixes:

0001491 MotoHawk CalIdTxt gets padded w/ non-printable characters sometimes
0001490 Crash while opening online cal after opening online display
0001460 Can't extract a .rcal frrom .rpg
0001450 Inconsistent values calibrating enumerations
0001431 Cannot open a *.rdis display created for prior build of a VEECAN model
0001429 Values 'jump' while calibrating 2D big endian MotoHawk targets
0001428 Problem Transfer Cals for enumerated values
0001423 Compare cals causes random crashing
0001419 SignalType ENUMARR not being handled properly
0001414 First search frrom a fresh install appended grey text in search window (search...)
0001412 MotoHawk RPG package was causing intermittent crashing
0001373 Calibrating ECM/GCM-196 fails silently
0001372 Resolved missing Context menu frrom Signal Tree viewer
0001354 Saving RPG after transfer upgrade doesn't work or casues crash
0001065 Resolved issue where Raptor-Cal crashes after awaking computer frrom sleep state
0001028 data inconsistent when editing index values used by multiple tables
0000794 Resolved issue where corrupted AvalonDock window save data causes the application to crash

2016-07-18: Release 2016a 0.0.1

Raptor-Service

Those looking to use this product as a service tool now have the option of preventing users frrom editing premade Raptor-Displays, as well as limiting what the user sees in the signal tree when connected online.

Data Visualization

2-D Data displayed on the grid now has the option available to apply a 5-Color heatmap to the individual cell backgrounds.

Miscellaneous

Copy-Paste on Raptor-Displays and between MSExcel, the ability to export a calibration file to a Matlab M-File, and better indication of file persistance are just a few of many small improvements that have been made to Raptor-Cal

Details

Individual features and bug fixes for this 2016a 0.0.1 are listed in the below sections

Other Features:

0001384 Heat Map for 2-d Display data
0001378 Copy-Paste on Raptor Displays
0001365 Export Calibration to M-File
0001249 Show J1939 ECU address in "Find Modules" feature
0001315 Don't allow closing of Raptor-Cal with unsaved .rcal or .rdis
0001364 Indicate saving (.rcal)/(.rpg) in progress when completing Transfer-Cal
0001241 "Merlin" Quick connect info button
0001330 Interpolation was previously unimplemented in calibration editor
0001408 DAQ Capacity Indicator on DAQ Schedule Tool Panel

Raptor Service:

0001261 Readonly Displays
0001036 Option to limit signals tree view

Bug Fixes:

0001293 DAQ Overflow will no longer cause crash, also max number of signals per DAQ is printed next to the DAQ period
0000720 ERR_SEQUENCE when editing table will no longer cause crash
0000900 Reboot frrom Application Monitor will no longer causes crash
0001250 Rebooting an application frrom display (after it has been paused by app monitor) will no longer cause crash
0001031 having a comma in an enumeration string was causing raptor-cal to stop working with that calibration signal
0001266 RDIS signals were intermittently loaded into AutoQuery instead of preferred DAQs
0001391 Win10 Installations would cut off menu bar icons

MotoHawk:

0001370 MotoHawk Calibration
0000646 MotoHawk modules need offline support
0001375 Compute and display MotoHawk query sizes
0000939 Offline Displays for MotoHawk Modules

MotoHawk Bugs:

0001396 MotoHawk (.rcal) was including non-calibration signals
0001383 MotoHawk Packager was sometimes decrypting garbge at beginning of file
0001382 MotoHawk calibrations at end of DataBlob get truncated
0000671 Motohawk query values were shown as zero bytes
0000729 Users were previously unable to open motohawk interpolation tables

2016-03-18: Release 2015b 0.0.2

Highlights

This build of Raptor-Cal adds on the previous 2015b major release with considerations that simplify the most commonly used workflows. User feedback and rigourous testing have been carefuly taken into account to improve on tool stability and user suitability.

New Modules

GCM196, ECM196, and BCM48 modules are fully supported for calibration and reflash over CAN

Calibration Workflows

The 'Compare Calibrations' function has been completely overhauled to quickly and efficiently allow a user to compare calibration values and save a report for reference when working between software builds and calibration versions.

The 'Transfer Calibrations' workflow has also continued to see improvement in the way of stability and functionality. Values may now be manually set in the workspace before finalizing a calibration transfer.

Workspace

Displays and Calibrations provide reliable data consistancy between their backing file, or online module. The workspace will also keep track of save status and ask the user to confirm any unsaved changes befoire saving.

Many functions are now accesible via context menu by right-clicking either the signal tree background, or RDIS/RCAL header

Details

Individual features and bug fixes for this 2015b 0.0.2 are listed in the below sections

New | Display (Online):

Signal Tree now shows proper (.rdis) name
DAQ Lists are now managed on a per-tab basis
Insert Tab function added to displays
Fixed bug where tabs being renamed with empty strings caused crashes

New | Display (Offline):

Fixed bug where closing save dialog without specifying a file name displayed error window
Offline display shows -- placeholder for values

New | Display (Upgrade):

Removed wizard dialog
Display upgrade happens automatically - removed reconciliation workflows

Open | Display (Online):

Opening display online for the wrong module will do auto-upgrade now

Open | Display (Offline):

Signal Tree now shows proper (.rdis) name
Offline display shows -- placeholder for values

Item Precision Management:

For double precision values, item will be displayed with the specified format, but may now be edited to the full presicion of the datatype

Calibration Window Updates:

Calibration Editor windows have ctrl-s save listener connected
Signal editor grid is no longer shown when calibrating offline
Calibration editor windows now have the same Update source as the signal editor grid

Workflow Optimization - New Calibration frrom Module:

No longer need to be online with a module already in order to initiate workflow
The only applicable save file format is now (.rcal)
Fixed issue where Detected modules window would occasionally 'lose' modules on the bus

Workflow Optimization - New Calibration frrom (.rpg):

Extra dialog is no longer required to extract frrom (.rpg)
Calibration automatically opens offline after extract
Default name for (.rcal) is now the target calibration id text

Workflow Optimization - Open Calibration Offline:

Fixed issue where signals would not immediately show up in tree when file is loaded
Suppressed behaviour where the same file could be open more than once

Workflow Optimization - Transfer Calibrations:

Added ability to change the value of calibrations that were not successfully transferred
Added ability to change the value of new calibrations
Cancel Edit notifications are more consistent when inspecting signal values

Workflow Optimization - Compare Calibrations:

Compare Calibrations workflow has been completely overhauled to look more like the Transfer Calibrations workflow

BCM48 UDS Reflash over CAN:

Reprogramming of them BCM48 which was previously only possible over ethernet may now be done over CAN via UDS protocol

Licensing v9 Update:

Raptor-Cal will now install NewEagle Licensing V0.0.9 with full support for Node Locked Licensing

Saving:

0001219 Dirty marker (filename marked with, '*') on (.rdis) and (.rcal) files
0001220 'Save All' function added
0001221 'Save' and 'Save As' added to Signal Tree context menu

Closing:

0001220 'Close All' function added
0001221 'Close' added to Signal Tree context menu

Flash:

0001224 Changed programming status bar appearance
No longer auto-connect by default after successful reprogramming

Find Modules:

0001223 Functionality implemented

Connecting:

0001225 Added ability to go online with an offline display
0001221 'Connect' added to the Signal Tree context menu

Disconnect:

0001220 'Disconnect All' function added
0001221 'Disconnect' added to the Signal Tree context menu

Misc:

0001222 Calibration Windows stay on top of parent window
0001226 Resolved issue where online non-scalars could not be edited directly
0001227 GCM\ECM196 Calibration Support
0001228 BCM48 Calibration Support
0001229 Resolved all cases where Raptor-Cal could not resolve a (.rpg) not located in default directory* Text boxes in cells are scrolled to the leftmost position when selected to edit
'Recent Displays' removed frrom module discovery dialogs
Upgrading a display now takes the filename of the previous display rather than the target SwIDTxt
Resolved multiple issues in attempting to save an online (.rdis) for a module that has either been disconnected or is reconnecting
SignalsTreeView allows lookup signals to populate in their default location as well as underneath the signals that they are axis for
Disabling over-eager clear-selection on cells to re-enable interpolation, justification, and hexadecimal display

2015-05-11: Release 2015b_0.0.1

Highlights

This version features significant stability and performance improvements, improvements to calibrations workflows (transfer calibrations in particular) and numerous UI improvements

XCP connection and reconnect times have been greatly reduced.

Redefining Calibration: In previous versionf of Raptor-Cal a calibration signal was simply defined as any writable value. This definition has been tightened to only include values marked as Adjustment that are stored in either Non-Volatile (EEPROM) or Constant (Flash) space. One benefit of this is that override status signals will no longer show up in a calibration.

Improved Transfer-Calibrations Workflow: Transfer-Upgrade and Merge workflows have been combined to allow signal values to be pushed to and frrom either a (.rcal) or (.rpg). Overall this workflow has significant improvements to make it more stable, provide more fine-grained control over what is being done, and provide more detailed cues about how values are being moved.

Calibration Editor: The signal tree has been improved to include special handling of calibration signals. When any signal with a green wrench may be double-clicked to launch a specialized calibration editor window. A red wrench indicated a signal that may be edited offline.

New Features

0001111 Generate Transfer-Upgrade Report
0000954 More structured calibration window format (group opens with double-click, etc.)
0001112 Support for GCM196 (GCM_1793_196_1503 - XCP Connection, Recovery, Reprogramming)
0001110 Support for ECM196 (ECM_1793_196_1503 - XCP Connection, Recovery, Reprogramming)
0001104 UDS Recovery
0001105 Ability to set row and column count in displays frrom settings
0001085 Improved MotoTronInterfaceLibrary specifically designed for Raptor-Cal
0000966 Added CALIDTxt (in addition to SWIDTxt) to connection screen
0000797 Raptor Packager UI included in Raptor-Cal (Previously only MotoHawk packager was included)
0000993 Added Signal Units in signal tree
0000965 In process - eliminate upgrade display requirement (Is now more streamlined)
0001054 Streamlined Display upgrade process
0001076 Implemented checkbox for auto-open calibration offline after extracting frrom rpg
0001092 Transfer cal sort alphabetically ascending
0000957 Improved transfer-cals workflow
0000913 Create full calibration after Transfer Upgrade

Resolved Issues

0001109 RCAL with signals not present in RPG caused transfer calibration crash
0001106 Column Width not being explicitly set caused display to skip serializing columns when saving an (.rdis)
0001088 Fault Data Definitions did not hold data when saved
0001078 Calibration Editor did not disconnect and commit cell when it loses focus
0001077 Transfer-Upgrade did not create RPG with memory segments
0001075 Transfer-Upgrade target still contained "old" definition of a calibration
0001074 Openning RCAL with non-calibration signals (the kind that may have previously been extracted) resulted in crash
0001057 Skipping calibrations during transfer upgrade can produce bad rcal
0001055 Closing transfer upgrade window did not restore start screen
0001045 Extracting online calibration on a CM3626 could result in a blank .rcal
0001033 MinWidth/Height of 0 on Signal Grid could result in 'losing' rows and columns
0001016 Extracting calibration online and offline produced different signals in a calibration
0000915 Transfer upgrade had graphical glitch, forcing calibration removal

2015-08-12: Release 2015a_0.0.2

Details

0000981 Resolved case where signal grid disposes itself too eagerly
0000397 Support added for VEECAN using Kvaser Simulated drivers
0000912 Added datalogging hyperlink queues
0000901 Enchanced Offline Display Workflows for non-calibratible modules
0000526 RaptorCal now handles the case where there is a build mismatch between a package and the s/w running on a module
0000972 Enabled 'RaptorCal' license product
0000811 More detailed license error reporting
0000799 Confusing license warning messages less confusing
0000836 Upgraded displays fixed to have the right SwIdTxt
0000944 "Fix Values" Dialog Box in Transfer Upgrade no longer has crooked text
0000741 With Quick Connect, don't ask what module to disconnect frrom
0000925 Added refresh button on ConnectXCP Dialog View
0000806 .rdis files targeting VeeCANs may now be Updated
0000751 Updated BCM48 image
0000903 Implemented Folder drag n drop
0000898 Resolved Reflash on Raptor-Cal 2015a 0.0.2 RC1 does not work
0000896 Added reflash support for ECM-1793-196-1503
0000894 Fixed RIL crash opening older packages
0000893 Removed External project reference in Application Helper exception recorder
0000940 Simultaneously open both RCAL and RDIS files while calibrating offline
0000927 Extracting online calibrations will no longer catch the state of an override in a calibration
0000948 Tables 1d and 2d with AXIS stored in Flash no longer cause Raptor-Cal to crash if editing value is attempted
0000921 Transfer upgrade no working between different target modules
0000895 Fixed transfer upgrade signals missing
0000870 Fixed Transfer-Upgrade crash when signal goes frrom adjustment to measurement

2015-05-25: Release 2015a.0.0.1

Highlights

This version features significant stability and performance improvements, improvements to calibrations workflows (offline calibrations in particular) and numerous UI improvements.

Details

0000866 Changing CAN Baud rate causes the application to crash
0000865 Opening offline display with no RPG shows cryptic error
0000832 Extracting an online CAL with a signal to the grid creates a duplicate value in the RCAL
0000863 Reduce default cell margins
0000179 Signal Detail Pane
0000838 Refreshing signals when doing offline calibration causes crash
0000841 Explicitly allow partial calibrations
0000856 Drag-n-drop on SignalsContainer takes wrong item
0000858 Units cells overflow to the left
0000859 Closing offline display dos not remove container frrom signal tree
0000843 Reading an .rcal with duplicate signals causes the application to crash
0000842 Show home page when all other documents are closed
0000748 extract calibration should not try to place the values on the page
0000711 Make UI consistent between Transfer Upgrade aed Transfer Merge
0000837 Signal Container needs to only show signals contained in rcal when doing offline calibrations
0000835 Drag-n-drop between DAQScheduleViewModel causes crash
0000831 Invalid veeCAN package causes application to crash
0000830 Remove references to RIL.UsbDriveInfo
0000784 DAQ gets hung
0000824 Wire in old cal workflows for patch release
0000801 About picture says merlin and shows a merlin picture
0000783 Merlin reference when no Kvaser connected
0000793 Default Datalogging Output Path
0000782 Melrin Reference in License Check
0000864 Remove unit text frrom the grid
0000833 Various drag-n-drop actions in the DAQ lists cause the application to hang
0000825 First 2015a release will also accept 2014b licenses

2015-03-16: Release 2014b.0.1.10

0000780: Ability to recover Motohawk modules in hardboot
0000779: Connection and reflash are broken

2015-03-16: Release 2014b.0.1.9

0000772: Add shortcut to Motohawk Packager frrom Merlin UI
0000770: Moving items between daqs throws an exception
0000640: Merlin display signals to display values as Hex or Decimal
0000769: Indicate signal direction in signal select
0000737: A, B, C, D for column headers
0000761: Corrupted RecentFiles.xml causes the application to crash
0000760: Setting value on disconnected XCP module causes the application to crash
0000719: RDIS files don't use the default RDIS directory
0000676: Long status messages are unreadble
0000673: Ctrl*s to save current display
0000646: MotoHawk modules need offline support
0000645: Notify UI of lost MIL Connection
0000687: SignalGridViewModel._signalsOnGrid need to be handled by name and not object reference
0000628: name tabs better when editing a can offline
0000654: upload online cal should be done in a dialog
0000694: create a "fast" query list
0000575: add ability to rearrange signals on grid w/ drag and drop
0000585: visually distinguish labels frrom data
0000663: CAN monitor should distinguish between error frames and loaded CAN bus
0000668: CAN traffic monitors stop working after Kvaser USB is removed and then restored
0000660: adding second CAN channel requires Merlin restart before it is accessable
0000649: table signals should have as many sub signals as possible collected under them in the signal tree
0000695: deleting one instance of a signal frrom the grid removes the signal frrom RDIS
0000672: save calibration tool bar button's tool tip says "Save Calibration Command"
0000680: Display signal 'Help Text' (LongIdentifier in A2L) as the tooltip shown when mouse over a signal in a display.
0000583: application monitor signals not correct

2015-01-26: Release 2014b.0.1.8

Added limited support for MotoHawk module connectivity (no cal workflows, only a selection of modules)
Improved Merlin's handling of very heavy CAN busses:
- Notifications when there is enough CAN traffic that communications with the module might not be reliable
- Notifications when DAQ packets are being dropped
Added basic data logging:
- Record and stop buttons in tool bar
- Records all scalar-sized signals to a CSV file
Added support for node-locked licenses
Added cell-justification formatting options
Display files preserve cell-justification and DAQ schedule
Improvements to DAQ scheduling:
- Drag-and-drop signals between the DAQs and Queries
- Signals that don't fit on a DAQ are cascaded down to slower DAQs
- Signals are put on the slowest DAQ by default (instead of the fastest)
Various UI improvements and bug fixes

2014-12-19: Release 2014b.0.1.7

Window layout is preserved bewteen sessions
Added ability to perform interpolation to modify calibration values
Signal tree shows signals sorted by name
Display and Calibration files can be opened in Merlin by opening them in Windows Explorer
Displays in list of most recent displays on start page can be removed
Bug fixes and stability improvements
UI improvements

2014-12-17: Release 2014b.0.1.6

Added merge and transfer-upgrade calibrations workflows
Added upgrade displays workflow
Display files now preserve row and column sizing
Various bug fixes and UI improvements

2014-11-20: Release 2014b.0.1.5

Fixed some bugs in table display
Merlin now supports signals-only packages for VeeCAN targets (generated when building just for the VeeCAN simulator)
Improvements to the display grid:
- The selected cell is now highlighted
- Data entry is easier
- Arrow key navigation works better
Models with non-standard DAQ configurations are better supported
Offline calibration extraction frrom RPG files feature added

2014-11-04: Release 2014b.0.1.3

Fixed crash when dragging external files onto Merlin grid
Cleaned up UI when dragging large signal groups onto grid
Fixed crash when refreshing signals when editing an offline calibration
Adding new signals into an offline calibration shows the values frrom the RPG
Only calibratable signals appear in the signals pane when editing an offline calibration

2014-10-31: Release 2014b.0.1.1

Offline calibration editing is supported
Fixed some issues with offline display editing
Fixed issues with having the same signal on the grid more than once
Updated the UI to have improved/consistent icons in the menus and toolbar
Merlin handles power-cycling modules while connected
Merlin is be able to reflash modules that are not accessible via XCP
Removed CHM-based help and replaced with a browser-based help (content still under work)
Improved handling of invalid RPG files

2014-10-28: Release 2014b.0.0.14

Fixed issue with reading large tables (> 255 bytes)
Fixed issue with table indexing
Added support for XCP access levels

@@ Line 3: / Line 3: @@
 Below is a list of all Raptor-Cal versions and their change logs, beginning with the most recent version.
-=== Release 2023a_2.0.13328 ===
+=== Release 2024a_1.0.13734 ===
+------------------------------------
+==== Highlights ====
+*Significant performance enhancements:
+**Strip Chart
+**Flashing GCM-196
+**Opening Displays/Calibrations
+*Display Grid Interactions:
+**Can now paste plaintext directly into signal value cells
+**Pressing the Tab key while editing a cell will now commit the edit and move to the next cell
+**Pressing the Backspace key while selecting a signal value will now enter the cell to edit and remove the current cell value
+*Added ability to begin data logging as soon as a display opens
+*Added ability to select all display grid cells simultaneously (Ctrl-A within a display)
+*Added new data logging format (under settings as Simulink logging format)
+*Added descriptions for reflash failure reasons
+*Recovery Baud Rate of selected module now automatically selected when recovery is initiated
+*Patched bug occurring where application would freeze when a module attempts to reconnect
+*Various bug fixes/improvements
+==== Details ====
+*CAL-1416 Investigate the 'Verification/Shutting Down' portion of the RCM-112 reflash procedure
+*CAL-1421 Chart doesn't use the decimal precision defined in the RPG
+*CAL-1423 Change the Strip Chart to re-draw the selected signal to be on top of same-value signals once it is selected
+*CAL-1445 Error msg when .config file cannot be read/is corrupted needs to be a little more descriptive
+*CAL-1450 Recent File's Modules is not removed upon all displays associated with that module being removed
+*CAL-1451 Ability to start logging when disconnected
+*CAL-1455 "Select all cells" feature
+*CAL-1477 Refactor CalEdit(Non)ScalarVM/CalEditorViewService classes
+*CAL-1534 You are able to open multiple instances of the License Viewer within Raptor-Cal
+*CAL-1538 Raptor Cal installer should error out if uninstaller fails to run
+*CAL-1541 Refactor KvaserCANLib into a Service so that KvaserCANChannel/KvaserCanAdapter can be tested
+*CAL-1546 Add 'IsUDSRecovery' flag to ModuleInfoEx; Omit recovery modules from tool address search during flash selection
+*CAL-1558 Strip Chart updates Y-Axis based on current DAQ value while paused
+*CAL-1561 StripChart sometimes does not start charting when connecting to an offline display with multiple tabs
+*CAL-1570 Store more than 10 recent displays
+*CAL-1574 [UI Testing] Ensure DAQ View is present before running DAQ related Display Tests
+*CAL-1580 Refactor StripChart within Merlin.UI into appropriate file structure
+*CAL-1581 After having replayed a log in Raptor-Cal, Raptor-Cal maintains control of that log even after the replay feature is exited
+*CAL-1584 Extract 'SignalsGrid' within StripPlot to its own VM
+*CAL-1585 Two Error Message Boxes appear when replaying a log that is already open in Excel
+*CAL-1586 Convert Plot to MVVM
+*CAL-1587 Strip Chart 'Cursor Point' can be moved off of the chart
+*CAL-1592 Calibrations are included in drop package from Signal Tree when 'Calibrations' Toggle is turned off
+*CAL-1593 Refactor GetHelpDoc within Raptor-Cal.Common into a Service
+*CAL-1597 Long delay occurring when opening a calibration table for the first time in a display session with a large application
+*CAL-1598 Status Bar not reset when exiting out of Fix Connect Menu without selecting a package
+*CAL-1599 Lock/Grey-Out screen, show loading cursor when switching connection in a display file
+*CAL-1600 Pressing 'Tab' after an edit will not select the next cell, typing a value edits the previous cell
+*CAL-1602 Create a better method of storing Chart Signal info for the StripChart
+*CAL-1603 Remove Saving/Loading Chart Settings to Local Application Data
+*CAL-1604 Introduce tasking within the GCM196 reflash procedure to reduce time/memory consumed
+*CAL-1605 Add default recovery module to settings
+*CAL-1607 Deadlock occurring when switching display tabs when module is attempting to re-connect
+*CAL-1608 Indicate interpolations when replaying Chart Log when signals were logged at different rates
+*CAL-1610 Re-arrange Merlin.UI/Merlin.UI.UnitTests external repos into the same sub-directory
+*CAL-1611 ArgumentNullException within NE.Common's UndoCommandService if scope is null
+*CAL-1612 Add Microsoft.Xaml.Behaviors to Installer Staging folder
+*CAL-1614 Improve performance loading Online/Offline displays; Switching between Online/Offline
+*CAL-1617 Refactor StripPlot control to MVVM
+*CAL-1619 Add back the ability to copy-paste values from Excel into a display grid
+*CAL-1620 Integer/DoubleTextBox does not support negative ('-') input
+*CAL-1621 Crash occurring if user settings file is manually edited while Raptor-Cal/Service is running and the tool is closed
+*CAL-1622 Status Bar displays "Attempting to reconnect..." after opening online display, switching to offline, and then closing the display
+*CAL-1627 Ignore module response to final ECU Reset command sent during reflash
+*CAL-1629 Handle retries for Build Checksum XCP command
+*CAL-1630 Add error handling to dialog close event method to prevent crash
+*CAL-1631 Auto-Switch baud rate when initiating recovery
+*CAL-1632 Change Recovery Screen
+*CAL-1633 Add way to reset auto scaling in the strip chart
+*CAL-1635 Add command that sets a viewable scale for each signal on the chart.
+*CAL-1636 Create Simulink supported playback format for csv file
+*CAL-1657 Add support for M2-502 module (GCM56)
+*CAL-1661 Add service and negative response descriptions to reflash error message
+*CAL-1664 Add option to create desktop shortcut for Cal/Service
+*CAL-1665 Crash occurring when opening a backup display file
+*CAL-1666 RP1210 Can Status remains after physically disconnecting
+*CAL-1671 Enable GCM-196 recovery screen for ECM-196
+*CAL-1673 Change Cal/Service build configuration to target Any CPU and to not prefer 32 bit
+*CAL-1676 Update NewEagleLicensing.exe to 24.2 in Installer
+*CAL-1677 Fix edge cases that can occur during a sequential test run
+*CAL-1678 Fix Connect Dialog is currently broken
+*CAL-1681 Change 'New Eagle Products, Inc.' to 'New Eagle LLC'
+*CAL-1596 Module Container remains in Signals View after workspace is closed if a Calibration Table is opened during the session
+*CAL-1634 Display Grid headers jump to beginning when committing an edit and they are scrolled to the right/down
+*CAL-1638 Issues removing from DAQ when signals are in multiple locations
+*CAL-1639 Leftover objects after deleting an Enum type signal from a display grid
+*CAL-1648 Crash occurring when navigating grid tabs using arrow keys and holding down shift
+*CAL-1649 Non-Scalar Calibration Dialog can be of infinite width
+*CAL-1672 Offline calibrations not being added to list of connected modules, leading to signal lookup issues
+=== Release 2023b_2.0.13564 ===
+------------------------------------
+==== Highlights ====
+*Built-In CAN Logging feature
+**Can enable in upper Toolbar, or during an individual flash attempt by enabling 'Log CAN' in Flash menu
+*'After-Flash' feature added to Flash Menu
+**Can quickly open or create a new display using the newly flashed connected module
+*Improved flashing speeds for the following modules:
+**RCM-80-2304
+**M47
+**GCM-111
+*Various bug fixes/improvements
+==== Details ====
+*CAL-1402 Change behavior of the 'Backspace' key in a display
+*CAL-1405 Add ability to log CAN Traffic within Raptor-Cal into a text file
+*CAL-1406 With 'Enable Kvaser Virtual' turned on, found module appeared twice during discovery
+*CAL-1408 Allow Raptor-Cal to accept RPGs with no defined DAQ lists
+*CAL-1410 Exception occurring due to Two-Way binding on read-only variable in Reflash Dialog
+*CAL-1413 Fix/Change Logic of Recent Displays feature
+*CAL-1414 Upper toolbar options not greyed out when unable to be performed
+*CAL-1429 Crash when connecting to a module whose running application's XCP def has 0 ms defined in the DAQ Rates vector
+*CAL-1432 Add support for NED custom reflash functions via RIL
+*CAL-1434 Hide Settings if the user does not have appropriate licensing
+*CAL-1435 Add NewEagleLicensing v.24.1 to Raptor-Cal installer
+*CAL-1436 Update Newtonsoft.Json Nuget Package
+*CAL-1438 Turn on DPI Awareness in Installers so high-res screens aren't blurry
+*CAL-1442 Add Import/Export Calibrations to the toolbar
+*CAL-1443 Datalog button does not change immediately after a disconnection/connection
+*CAL-1447 Improper use of semaphore within DataDictionary
+*CAL-1448 Allow ability to quickly turn on the 'Enable Kvaser Virtual' setting from discovery dialogs
+*CAL-1449 Add 'Delete Selection' option to right-click options
+*CAL-1454 Add 'Open Most Recent Display' option to the Open Display Reflash feature
+*CAL-1457 Datalogging is allowed without a license
+*CAL-1463 Raptor Cal doesn't detect duplicate ECUs very well during flash
+*CAL-1466 Raptor-Cal crash on startup due to corrupted License Viewer/failed install of licensing
+*CAL-1490 Expand 'Export Calibrations' to be able to export to a .csv format
+*CAL-1519 Add error message for if a RCM-80 2203 RPG is flashed onto a 2304, and vice versa
+*CAL-1521 Display Column/Row Headers don't quite line up with cells
+*CAL-1531 Expand the 'Connect' feature within the Flash Dialog to be able to open an existing display after a re-flash
+*CAL-1547 Add 'Log CAN Traffic' Toggle to Reflash
+*CAL-1560 Tab switching upon an attempted Save As/Save
+*CAL-1562 Issue jumping tabs and then clicking 'Start Log' button
+*CAL-1564 Unexpected switch between tabs when pasting between tabs
+*CAL-1565 RCM80-2304 - Improve reflash speeds
+*CAL-1566 Remove the Default Session Re-tries Section from the beginning of the RCM-80 reflash procedure
+*CAL-1568 M47 - Improve reflash speeds
+*CAL-1572 Create a utility function to always return a valid 'block size'
+*CAL-1575 Add a 'Stop if Module Found' checkbox to the Find Modules feature when using 'Find All'
+*CAL-1576 Implement a better Error Message for when a newer display schema is opened that can be handled
+*CAL-1577 GCM111 - Improve reflash speeds
+*CAL-1578 Convert StripChartToolbar to MVVM
+*CAL-1579 Strip Chart Scale not entirely accurate away from center
+*CAL-1582 Convert Scale to MVVM
+*CAL-1583 Convert StripPlotScaleManager to MVVM
+*CAL-1588 Overhaul the Edit Ranges / Colors Dialog
+=== Release 2023b_1.1.13506 ===
+------------------------------------
+==== Details ====
+*CAL-3362: Add new M47 Bootloader Rev
+*CAL-3388: Support RCM80-2304 bootloader v320
+=== Release 2023b_1.0.13438 ===
+------------------------------------
+==== Highlights ====
+*Theme Update!
+**Raptor-Cal now matches the color scheme used by Raptor-Dev Blocks
+*Datalogging Triggers
+**New feature found under Logging Settings within a display (wrench icon in toolbar)
+**Allows for triggers to be set on the active grid to start/stop logging
+*Multi-Display Datalogging
+**Expanded datalogging to allow for multiple active display grids to be simultaneously logged into the same .csv file (max. of 3)
+**Enabled in the main Settings menu (Logging Multiple Display Grids toggle)
+*Command Line Features
+**Certain Raptor-Cal features are now able to be used via a command line shell
+**Transfer Cals (RCAL -> RPG)
+***EX: “transfer file1.rpg file2.rcal output.rpg”
+**Export Calibrations
+***EX: “export file1.rcal file2.rpg output.m (false)”
+**Import Calibrations
+***EX: “import file1.m file2.rpg output.rcal”
+***OR: “import file1.m file2.rcal output.rcal”
+**Extract Calibration
+***EX: “extract_cal file1.rpg output.rcal”
+*Custom Layouts
+**New feature added under 'View' in toolbar
+**Can save and reload orientations of the Signals, DAQ, and Strip Chart views at any time between sessions
+**'Default Layout' also under 'View' in toolbar will reset the View orientations
+*Display/Calibration Format Override
+**New display feature allowing for the 'Display Decimal Places' attribute of a signal set in the model to be overwritten
+**Saves directly to the display/calibration between sessions
+**Does not overwrite value determined in model
+*Export Calibrations
+**Expanded the 'export to .m file' feature to be more customizable
+***Toggle signal pathing
+***Toggle Software ID for signals
+***Export enumerations with their string values
+***Export values as 'ungained'
+*Import Calibrations
+**New feature that allows for a new calibration to be created from a previously exported .m script and an RPG/RCAL
+**Selecting an RCAL for the Signal Definition will merge the .m script values onto the RCAL
+==== Details ====
+*CAL-1830: Investigate faulting issues with DAQ lists
+*CAL-1832: Investigate unused features within Transfer Calibrations feature
+*CAL-1833: Add ability to change baud rate within discovery dialogs
+*CAL-1837: Expand Reference Values in header of Data Logs
+*CAL-1840: Issue reading checksum when extracting from module
+*CAL-1842: Add flag to Export .rcal Command Line option that would extract calibrations w/o the calculated Gain value
+*CAL-1844: GCM-111 Byte Order is incorrect when using any calibration feature
+*CAL-1845: Prevent direct memory accessing for VeeCAN Modules
+*CAL-1846: There is an intermittent error where the data fields displayed/recorded for a multibyte array are ordered incorrectly
+*CAL-1847: Remove Lite Mode Feature
+*CAL-1850: Crash on start-up if machine has FIPS compliance check enabled
+*CAL-1851: Refactor UdsReflash Procedures to use globally used CANMessage Class
+*CAL-1859: Raptor-Cal Color Scheme Update
+*CAL-1864: Updating svn:ignore settings
+*CAL-1874: Allow for Multi Active DAQ Datalogging
+*CAL-1875: Show in Explorer for logger crashes
+*CAL-1876: Certain Signal Values not being converted correctly when exporting to an .m file
+*CAL-1882: Add option in the 'Export' feature to export enums as the value or string
+*CAL-1885: Configure the format override to work as intended with Partial Calibrations
+*CAL-1886: Allow for ability to override the Signal Formatting within Displays/Calibrations
+*CAL-1887: Signals moving unexpectedly  between DAQ lists
+*CAL-1888: Change new Views to be created on the left side of the screen
+*CAL-1889: Bit Arrays not being converted correctly
+*CAL-1891: Update Customizer to include the new NewEagleAccent global value
+*CAL-1892: Make so the 'Save As' option can be performed at any time
+*CAL-1898: Update Raptor-Cal Help Documentation with Screenshots/Explanations of 2023a 2.0 Features/Color Scheme
+*CAL-1900: Add ability to set the wait-for-response time during discovery
+*CAL-1901: Change About Screens to always get the current year
+*CAL-1907: Connect Online Display dialog shown after display is closed
+*CAL-1908: Change Error Dump feature to only grab files within the Raptor-Cal Error Reports folder
+*CAL-1910: A means of having the tabs return the the default layout oreintation
+*CAL-1912: Issues with the 'Signal Summary' section in the Signals View
+*CAL-1915: Add additional space between rows of the Module Label within the Signals View
+*CAL-1919: Organize Error/Crash Reports in LocalFiles
+*CAL-1921: Add way to Create New Partial Calibration directly from the New... menu in Start Page/Toolbar
+*CAL-1922: Add Copyright Headers to all Source Files within project
+*CAL-1924: Signals View is cleared if Partial-Cal creation screen is open and original calibration is closed
+*CAL-1925: Added RCM-5734R-080-2203-RTOS target
+*CAL-1926: Specifying more information on each thread
+*CAL-1927: Allow for the baud rate to be modified if all open documents are Offline; Allow Find Modules to be used
+*CAL-1928: Resizing Display Window Crashes Raptor-Cal
+*CAL-1931: Calibration window with over 50 calibrations duplicates cals on second tab each time tab is visited
+*CAL-1934: Raptor-Cal reads "Connecting..." endlessly in bottom left hand corner and does not open display
+*CAL-1935: Add cursor change when loading
+*CAL-1938: Refactor Discovered Module Tiles
+*CAL-1940: Ability to easily see calibration transfers
+*CAL-1941: Export Calibration that is not a GCM/ECM\_196 generates incorrect Enum
+*CAL-1942: Expand 'Import Calibrations' to optionally accept an existing RCAL file to merge the import onto
+*CAL-1943: Add 'Include Software ID' option in Export Calibration Menu
+*CAL-1944: Clicking on Raptor associated files while Raptor-Cal is running
+*CAL-1945: Create Import/Export Calibrations Dialog; Expand Import/Export Functionality
+*CAL-1946: Import \(.m\) file to Calibration
+*CAL-1947: Add Import/Export \(.m/.rcal\), and Extract .rcal from .rpg commands to be usable from the command line
+*CAL-1949: Implement a keyboard shortcut for scrolling horizontally in a display
+*CAL-1950: 1D/2D signals make size of the UpgradeFix Signal Box after a Calibration Transfer extremely wide
+*CAL-1951: Cut command does not work with plain text cells
+*CAL-1952: Reopen existing instance of Raptor Cal on shortcut click
+*CAL-1954: rcal -> rpg transfer calibrations fail unit tests.
+*CAL-2183: Update Raptor Cal/XCP for CANFD
+*CAL-2714: Triggered start and stop
+*CAL-3346: Prevent XCP Errors/General exceptions from being shown in the status bar
+*CAL-3347: Handle unknown exceptions in Reflash Dialog when attempting to reflash
+*CAL-3349: Fix progress bar in reflash screen when no module photo is displayed
+*CAL-3352: RIL DataDictionary able to have duplicate key added
+*CAL-3354: RIL Packager causing RPGs to be built corrupted \(no program code\); Raptor-Cal allowing this to be flashed onto a target
+*CAL-3357: Support RCM-080 bootloader v3.0.0
+*CAL-3358: Support GCM111 Licensing Protection
+*CAL-3364: Support RCM80_2304 bootloader v3.1.0
+=== <s>Release 2023a_2.0.13328</s> ===
 ------------------------------------
 ==== Highlights====
+*Added support for new target:
-*Added support for new targets:
-**RCM-58NN-112-2208
 **RCM-5743R-080-2304
 *Includes updated License Viewer v.12.9
@@ Line 27: / Line 294: @@
 *0004749: [Raptor-CAL] Re-configure Existing UI Tests to work individually
-=== Release 2023a_1.0.13187 ===
+=== <s>Release 2023a_1.0.13187</s> ===
 ==== Highlights====
 *Warning Ranges Feature