Raptor:OBD Drive Cycle: Difference between revisions
Jump to navigation
Jump to search
(Created page with 'Return to the main Raptor page Return to OBD Faults page right|frame|Raptor OBD Drive Cycle == Descripti…') |
No edit summary |
||
| Line 3: | Line 3: | ||
[[Raptor:Faults(OBD)|Return to OBD Faults page]] | [[Raptor:Faults(OBD)|Return to OBD Faults page]] | ||
[[File:RaptorOBDDriveCycle.jpg|right|frame| | [[File:RaptorOBDDriveCycle.jpg|right|frame|Raptor™ OBD Drive Cycle]] | ||
== Description == | == Description == | ||
Revision as of 15:18, 4 March 2014
Return to the main Raptor page
Description
This block signals the end of a drive cycle to the OBD Fault Manager.
Inputs
| Input | Type | Description |
|---|---|---|
| Inhibit | boolean | Inhibits this block from signaling the end of a drive cycle (Only available when enabled). |
| Warmup Cycle | boolean | Indicates if the drive cycle met the warmup cycle criteria. |
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Show Inhibit Port | Enables the Inhibit input port. |
Supported Versions
- Raptor 2013a_0.0.1 and newer