Raptor:OBD Ratio Increment: Difference between revisions
Jump to navigation
Jump to search
(Created page with 'Return to the main Raptor page Return to OBD Faults page right|frame|Raptor OBD Ratio Increment == D…') |
No edit summary |
||
| Line 3: | Line 3: | ||
[[Raptor:Faults(OBD)|Return to OBD Faults page]] | [[Raptor:Faults(OBD)|Return to OBD Faults page]] | ||
[[File:RaptorOBDRatioIncrement.jpg|right|frame| | [[File:RaptorOBDRatioIncrement.jpg|right|frame|Raptor™ OBD Ratio Increment]] | ||
== Description == | == Description == | ||
Revision as of 15:20, 4 March 2014
Return to the main Raptor page
Description
This block increments an OBD ratio. The counters can only be incremented once each (numerator and denominator) per drive cycle regardless of the number of times the increment block is executed. This block requires the ratio to be defined with a OBD ratio definition.
Inputs
| Input | Type | Description |
|---|
Outputs
| Output | Type | Description |
|---|
Parameters
| Parameter | Type | Description |
|---|---|---|
| Ratio Name | The name of the ratio. This must be unique. | |
| Numerator/Denominator | Chooses which counter to increment. | |
| Show Inhibit Port | Enables the inhibit input port. |
Supported Versions
- Raptor 2013a_0.0.1 and newer